20ETF12S

Bulletin I2208 03/05 QUIETIR Series 20ETF12SPbF FAST SOFT RECOVERY RECTIFIER DIODE Lead-Free ("PbF" suffix) VF < 1.31V @ 20A IFSM = 355A VRRM= 1200V Description/ Features The 20ETF12SPbF fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF trr TJ @ 20 A, TJ = 25°C @ 1A, 100A/µs range Package Outline Units A V A V ns °C Values 20 1200 355 1.31 95 - 40 to 150 D2 Pak (SMD-220) www.irf.com 1 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 Voltage Ratings VRRM , maximum Part Number peak reverse voltage V 1200 VRSM , maximum non repetitive peak reverse voltage V 1300 IRRM 150°C mA 6 20ETF12SPbF Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM It 2 20ETF..S 20 300 355 450 635 Units A A A2s A √s 2 Conditions @ TC = 97° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied Max. Peak One Cycle Non-Repetitive Surge Current Max. I t for fusing 2 I √t 2 Max. I √t for fusing 2 6350 Electrical Specifications Parameters VFM rt IRM Max. Forward Voltage Drop Forward slope resistance 20ETF..S 1.31 11.88 0.93 0.1 6 Units V mΩ V mA Conditions @ 20A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VF(TO) Threshold voltage Max. Reverse Leakage Current VR = rated VRRM Recovery Characteristics Parameters trr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Snap Factor tb/ta 20ETF..S 400 6.1 1.7 0.6 Units ns A µC typical Conditions IF @ 20Apk @ 25A/ µs @ 25°C dir dt Ifm trr ta tb Qrr Irm (REC) t 2 www.irf.com 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 20ETF..S Units - 40 to 150 - 40 to 150 0.9 62 240 2 (0.07) °C °C °C/W °C/W °C g (oz.) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)** Ts wt Soldering Temperature Approximate Weight Case Style Device marking 2 DC operation D2Pak (SMD-220) 20ETF12S ** When mounted on 1" square (650mm ) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 Maximum Allowable Case Temperature (°C) 20ETF.. Series RthJC (DC) = 0.9 K/W Maximum Allowable Case Temperature (°C) 150 150 20ETF.. Series RthJC (DC) = 0.9 K/W 140 140 130 Conduction Angle 130 Conduction Period 120 30° 110 60° 90° 120° 180° 100 0 5 10 15 20 25 120 60° 110 30° 90° 120° 15 180° DC 25 30 35 100 0 5 10 20 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 35 30 25 20 15 Conduction Angle Fig. 2 - Current Rating Characteristics 45 40 35 30 25 20 RMS Limit 15 10 5 0 0 5 10 15 20 Conduction Period 180° 120° 90° 60° 30° RMS Limit DC 180° 120° 90° 60° 30° 10 5 0 20ETF.. Series TJ = 150°C 0 5 10 15 20 25 20ETF.. Series TJ = 150°C 25 30 35 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics www.irf.com 3 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 350 Peak Half Sine Wave Forward Current (A) 300 250 200 150 100 20ETF.. Series 50 1 10 100 Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150°C 400 350 300 250 200 150 100 50 0.01 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150°C No Voltage Reapplied Rated VRRMReapplied 20ETF.. Series 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 1000 Instantaneous Forward Current (A) Fig. 6 - Maximum Non-Repetitive Surge Current 100 TJ = 25°C 10 T = 150°C J 20ETF.. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Maximum Reverse Recovery Time - Trr (µs) 0.7 0.6 0.5 0.4 I FM= 30 A Maximum Reverse Recovery Time - Trr (µs) 1.2 20ETF.. Series TJ = 150 °C 0.9 20ETF.. Series TJ = 25 °C 0.6 I FM= 30 A 0.3 20 A 0.2 0.1 0 10 A 5A 1A 0.3 20 A 10 A 5A 1A 0 50 100 150 200 0 0 50 100 150 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C Fig. 9 - Recovery Time Characteristics, TJ = 150°C 4 www.irf.com 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 6 5 4 3 10 A Maximum Reverse Recovery Charge - Qrr (µC) 20ETF.. Series TJ = 25 °C I FM= 30 A Maximum Reverse Recovery Charge - Qrr (µC) 10 20ETF.. Series TJ = 150 °C 8 I FM = 30 A 20 A 20 A 6 10 A 4 5A 2 5A 1 0 2 1A 1A 0 50 100 150 200 0 0 50 100 150 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C Maximum Reverse Recovery Current - Irr (A) 25 20ETF.. Series TJ = 25 °C 20 I FM= 30 A 20 A 10 A 5A Fig. 11 - Recovery Charge Characteristics, TJ = 150°C Maximum Reverse Recovery Current - Irr (A) 35 30 25 10 A 20ETF.. Series T = 150 °C J I FM= 30 A 20 A 15 20 15 10 5 0 5A 10 1A 1A 5 0 0 50 100 150 200 0 50 100 150 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C Transient Thermal Impedance Z thJC (K/W) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.1 Fig. 13 - Recovery Current Characteristics, TJ = 150°C Steady State Value (DC Operation) Single Pulse 20ETF.. Series 0.01 0.0001 0.001 0.01 Square Wave Pulse Duration (s) 0.1 1 Fig. 14 - Thermal Impedance ZthJC Characteristics www.irf.com 5 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Dimensions in millimeters and inches Marking Information THIS IS A 20ETF12S WITH LOT CODE 5K3A ASSEMBLED ON WW 12, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 20ETF12S DATE CODE YEAR 0 = 2000 WEEK 12 P = LEAD-FREE 6 www.irf.com 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIR ECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) Dimensions in millimeters and inches FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 60 (2.362) DIA. MIN . 360 (14.173) DIA. MAX. of 800 pieces per reel for both TRL and TRR. www.irf.com 7 20ETF12SPbF QUIETIR Series Bulletin I2208 03/05 Ordering Information Table Device Code 20 1 1 2 3 4 5 6 7 E 2 - T 3 F 4 12 5 S 6 TRL PbF 7 8 Current Rating (20 = 20A) Circuit Configuration: E = Single Diode Package: T = D2Pak (TO-220AC) Type of Silicon: F = Fast Soft Recovery Rectifier Voltage Rating (12 = 1200V) S = Surface Mountable none = Tape TRR = Tape & Reel (Right Oriented) TRL = Tape & Reel (Left Oriented) 8 - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/05 8 www.irf.com