22RIA80S90

Bulletin I2403 rev. A 07/00 22RIA SERIES MEDIUM POWER THYRISTORS Stud Version Features Improved glass passivation for high reliability and exceptional stability at high temperature High di/dt and dv/dt capabilities Standard package Low thermal resistance Metric threads version available Types up to 1600V V DRM / V RRM 22A Typical Applications Medium power switching Phase control applications Can be supplied to meet stringent military, aerospace and other high-reliability requirements Major Ratings and Characteristics Parameters IT(AV) @ TC IT(RMS) ITSM 2 10 to 120 22 85 35 22RIA 140 to 160 22 85 35 340 355 575 525 1400 to 1600 110 Units A °C A A A A2 s A2 s V µs °C @ 50Hz @ 60Hz 400 420 793 724 100 to 1200 It @ 50Hz @ 60Hz VDRM/VRRM tq TJ typical - 65 to 125 Case Style TO-208AA (TO-48) www.irf.com 1 2 2RIA Series Bulletin I2403 rev. A 07/00 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 10 20 40 60 22RIA 80 100 120 140 160 V DRM /V RRM , max. repetitive peak and off-state voltage (1) V 100 200 400 600 800 1000 1200 1400 1600 VRSM , maximum nonrepetitive peak voltage (2) V 150 300 500 700 900 1100 1300 1500 1700 I DRM /I RRM m ax. @ TJ = TJ max. mA 20 10 (1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20A/µs (2) For voltage pulses with tp ≤ 5ms On-state Conduction Parameter IT(AV) IT(RMS) ITSM Max. average on-state current @ Case temperature Max. RMS on-state current Max. peak, one-cycle non-repetitive surge current 22RIA 10 to 120 22 85 35 400 420 335 355 140 to 160 22 85 35 340 355 285 300 575 525 405 370 5750 1.01 1.17 12.24 10.35 --1.80 Units A °C A A Conditions 180° sinusoidal conduction t = 10ms t = 8.3ms t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. I2t Maximum I2t for fusing 793 724 560 515 A2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms I2√t Maximum I2√t for fusing voltage 7930 0.83 0.95 14.9 13.4 1.70 --- A2√s V t = 0.1 to 10ms, no voltage reapplied, TJ = TJ max. (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max. VT(TO)1 Low level value of threshold VT(TO)2 High level value of threshold voltage rt1 rt2 VTM Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage mΩ (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max. V Ipk= 70 A, TJ = 25°C TJ = 25°C. Anode supply 6V, resistive load, IH IL Maximum holding current Latching current 130 200 mA 2 www.irf.com 2 2RIA Series Bulletin I2403 rev. A 07/00 Switching Parameter di/dt Max. rate of rise of turned-on current VDRM ≤ 600V VDRM ≤ 800V VDRM ≤ 1000V VDRM ≤ 1600V tgt trr tq Typical turn-on time Typical reverse recovery time 200 180 160 150 0.9 4 µs TJ = 25°C, at = rated VDRM/VRRM, TJ = 125°C TJ = TJ max., ITM = IT(AV), tp > 200µs, di/dt = -10A/µs Typical turn-off time 110 TJ = TJ max., ITM = IT(AV), tp > 200µs, VR = 100V, di/dt = -10A/µs, dv/dt = 20V/µs linear to 67% VDRM, gate bias 0V-100W (*) tq = 10µsup to 600V, tq = 30µs up to 1600V available on special request. A/µs 22RIA Units Conditions TJ = TJ max., VDM = rated VDRM Gate pulse = 20V, 15Ω, tp = 6µs, tr = 0.1µs max. ITM = (2x rated di/dt) A Blocking Parameter dv/dt Max. critical rate of rise of off-state voltage 22RIA 100 300 (*) Units V/µs Conditions TJ = TJ max. linear to 100% rated VDRM TJ = TJ max. linear to 67% rated VDRM (**) Available with: dv/dt = 1000V/µs, to complete code add S90 i.e. 22RIA160S90. Triggering Parameter PGM IGM -VGM IGT Maximum peak gate power PG(AV) Maximum average gate power Max. peak positive gate current Maximum peak negative gate voltage DC gate current required to trigger 90 60 35 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 3.0 2.0 1.0 2.0 0.2 V V mA V mA TJ = - 65°C TJ = 25°C TJ = 125°C TJ = - 65°C TJ = 25°C TJ = 125°C TJ = TJ max., VDRM = rated value TJ = TJ max. VDRM = rated value Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger current/ voltage are the lowest value which will trigger all units 6V anode-tocathode applied 22RIA 8.0 2.0 1.5 10 Units Conditions W A V TJ = TJ max. TJ = TJ max. TJ = TJ max. www.irf.com 3 2 2RIA Series Bulletin I2403 rev. A 07/00 Thermal and Mechanical Specification Parameter TJ Tstg Max. operating temperature range Max. storage temperature range 22RIA - 65 to 125 - 65 to 125 0.86 Units Conditions °C °C K/W DC operation R thJC Max. thermal resistance, junction to case R thCS Max. thermal resistance, case to heatsink T Mounting torque to nut 0.35 K/W Mounting surface, smooth, flat and greased to device 25 0.29 2.8 lbf-in kgf.m Nm g (oz) See Outline Table Lubricated threads (Non-lubricated threads) 20(27.5) 0.23(0.32) 2.3(3.1) wt Approximate weight Case style 14 (0.49) TO-208AA (TO-48) ∆RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle 180° 120° 90° 60° 30° Sinusoidal conduction Rectangular conduction Units 0.21 0.25 0.31 0.45 0.76 0.15 0.25 0.34 0.47 0.76 K/W Conditions TJ = TJ max. Ordering Information Table Device Code 22 1 RIA 160 2 3 M 4 S90 5 1 2 3 4 - Current code Essential part number Voltage code: Code x 10 = VRRM (See Voltage Rating Table) None = Stud base TO-208AA (TO-48) 1/4" 28UNF-2A M = Stud base TO-208AA (TO-48) M6 X 1 5 - Critical dv/dt: None = 300V/µs (Standard value) S90 = 1000V/µs (Special selection) 4 www.irf.com 2 2RIA Series Bulletin I2403 rev. A 07/00 Outline Table Case Style TO-208AA (TO-48) All dimensions in millimeters (inches) Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 130 22RIA Series (100 to 1200V) R thJC (DC) = 0.86 K/W 130 22RIA Series (100 to 1200V) RthJC (DC) = 0.86 K/W 120 120 110 Conduction Angle 110 Conduction Period 100 30° 100 60° 30° 60° 90° 120° 180° DC 0 10 20 30 40 90° 90 120° 180° 90 80 0 5 10 15 20 25 80 Average On-state Current (A) Average On-state Current (A) Fig. 1 - Current Ratings Characteristic Fig. 2 - Current Ratings Characteristic www.irf.com 5 2 2RIA Series Bulletin I2403 rev. A 07/00 Maximum Average On-state Power Loss (W ) 40 35 30 25 20 15 10 5 0 0 5 10 Conduction Angle 180° 120° 90° 60° 30° RMS Limit Rt 2 K/ W A hS = /W 1K 3K /W 4K /W 5K /W aR elt -D 22RIA Series (100 to 1200V) TJ = 125°C 15 20 7K /W 10 K /W 25 0 25 50 75 100 125 Average On-state Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 3 - On-state Power Loss Characteristics Maximum Average On-state Power Loss (W) 50 45 40 35 30 DC 180° 120° 90° 60° 30° Rt A hS 2 K/ W = 1 W K/ 25 RMS Limit 20 15 10 5 0 0 5 10 15 Conduction Period 3K /W 4K /W a elt -D R 5K /W 7K /W 10 K/W 22RIA Series (100 to 1200V) TJ = 125°C 20 25 30 35 0 25 50 75 100 125 Average On-state Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 4 - On-state Power Loss Characteristics 375 Peak Half Sine Wave On-state Current (A) 350 325 300 275 250 225 200 175 150 1 22RIA Series (100 to 1200V) 10 100 Peak Half Sine Wave On-state Current (A) At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial T = 125°C J @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 400 375 350 325 300 275 250 225 200 175 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T = 125°C J No Voltage Reapplied Rated VRRMReapplied 22RIA Series (100 to 1200V) 0.1 Pulse Train Duration (s) 1 150 0.01 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 6 www.irf.com 2 2RIA Series Bulletin I2403 rev. A 07/00 1000 Instantaneous On-state Current (A) 100 10 TJ= 25°C TJ = 125°C 22RIA Series (100 to 1200V) 1 1.5 2 2.5 3 1 0.5 Instantaneous On-state Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 130 130 22RIA Series (1400 to 1600V) R thJC (DC) = 0.86 K/W 22RIA Series (1400 to 1600V) R thJC (DC) = 0.86 K/W 120 120 110 30° 60° Conduction Angle 110 Conduction Period 100 100 30° 60° 90° 120° 180° DC 0 10 20 30 40 90° 90 120° 180° 90 80 0 5 10 15 20 25 80 Average On-state Current (A) Average On-state Current (A) Fig. 8 - Current Ratings Characteristics Maximum Average On-state Power Loss (W ) 40 35 30 25 RMS Limit 20 15 Conduction Angle Fig. 9 - Current Ratings Characteristics 180° 120° 90° 60° 30° 2. 5 3K /W 4K /W 5K /W 2 K/ W K/ W 5 1. W K/ /W 1K S R th A K/W .5 =0 R elta -D 7K /W 10 K /W 10 5 0 0 5 10 22RIA Series (1400 to 1600V) TJ= 125°C 15 20 25 0 25 50 75 100 125 Average On-state Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 10 - On-state Power Loss Characteristics www.irf.com 7 2 2RIA Series Bulletin I2403 rev. A 07/00 Maximum Average On-state Power Loss (W) 55 50 45 40 35 30 25 RMS Limit 20 15 10 5 0 0 5 10 15 Conduction Period DC 180° 120° 90° 60° 30° hS Rt 1 W K/ K/ W 2K /W 2.5 K 3 K /W /W 4K /W 5K /W 7 K/ W 10 K/W 1. 5 A = W K/ 0.5 aR elt -D 22RIA Series (1400 to 1600V) TJ = 125°C 20 25 30 35 0 25 50 75 100 125 Average On-state Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 11 - On-state Power Loss Characteristics 300 Peak Half Sine Wave On-state Current (A) 280 260 240 220 200 180 160 140 1 22RIA Series (1400 to 1600V) 10 100 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T = 125°C J @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 340 Peak Half Sine Wave On-state Current (A) 320 300 280 260 240 220 200 180 160 140 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ= 125°C No Voltage Reapplied Rated RRM Reapplied V 22RIA Series (1400 to 1600V) 0.1 Pulse Train Duration (s) 1 120 0.01 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 12 - Maximum Non-Repetitive Surge Current 1000 Instantaneous On-state Current (A) TJ= 25°C 100 Fig. 13 - Maximum Non-Repetitive Surge Current TJ = 125°C 10 22RIA Series (1400 to 1600V) 1 0 1 2 3 4 5 6 Instantaneous On-state Voltage (V) Fig. 14 - Forward Voltage Drop Characteristics 8 www.irf.com 2 2RIA Series Bulletin I2403 rev. A 07/00 Transient Thermal Impedance Z thJC (K/W) 1 Steady State Value R thJC = 0.86 K/W (DC Operation) 0.1 22RIA Series 0.01 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 15 - Thermal Impedance ZthJC Characteristics 100 Instantaneous Gate Voltage (V) Rectangular gate pulse a) Recommended load line for rated di/dt : 10V, 20ohms tr = 6 µs b) Recommended load line for