26MB600A

Bulletin I2715 rev. E 08/97 MB & JB SERIES SINGLE PHASE BRIDGE Features Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E 62320 approved Power Modules 10 A 25 A 35 A Description A range of extremely compact, encapsulated single phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and instrumentation applications. Major Ratings and Characteristics Parameters 100JB-L 26MB-A 36MB-A 250JB-L 35MB-A IO @ TC IFSM @ 50Hz @ 60Hz I2t @ 50Hz @ 60Hz VRRM range TJ 10 65 148 155 110 100 25 65 400 420 790 725 50 to 1600 -40 to 150 35 60 475 500 1130 1030 Units A o C A A A2 s A2 s V o C www.irf.com 1 MB & JB Series Bulletin I2715 rev. E 08/97 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 5 10 100JB..L 26MB..A 250JB..L 36MB..A 35MB..A 20 40 60 80 100 120 140 160 V RRM , maximum repetitive peak reverse voltage V 50 100 200 400 600 800 1000 1200 1400 1600 VRSM , maximum nonrepetitive peak rev. voltage V 75 150 275 500 725 900 1100 1300 1500 1700 I RRMmax. @ TJ max. mA 2 Forward Conduction Parameters IO Maximum DC output current @ Case temperature IFSM Maximum peak, one-cycle non-repetitive forward current 100JB-L 26MB-A 36MB-A Units Conditions 250JB-L 35MB-A 10 8 65 148 155 125 130 I2t Maximum I2t for fusing 110 100 78 71 I2√t VF(TO)1 VF(TO)2 rt1 rt2 VFM IRRM VINS Maximum I2√ t for fusing Low-level of threshold voltage High-level of threshold voltage Low-level forward slope resistance High-level forward slope resistance Maximum forward voltage drop Max. DC reverse current RMS isolation voltage base plate 1.1 1.00 1.17 15.4 10.8 1.3 10 2700 25 20 65 400 420 335 350 790 725 560 512 5.6 0.76 0.92 6.8 5.0 1.11 10 2700 35 28 60 475 500 400 420 1130 1030 800 730 11.3 0.79 0.96 5.8 4.5 1.14 10 2700 V µA V mΩ KA2√s V A2 s A A °C A t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Initial TJ = TJ max. Resistive or inductive load Capacitive load I2t for time tx = I2 √t x √tx ; 0.1 ≤ tx ≤ 10ms, VRRM = 0V (16.7% x π x IF(AV) < I π x IF(AV) ), @ TJ max. (16.7% x π x IF(AV) < I π x IF(AV) ), @ TJ max. TJ = 25 oC, I FM =I Favg (arm) x π , tp = 400µs TJ = 25 o C, per diode at VRRM f = 50 Hz, t = 1s 2 www.irf.com MB & JB Series Bulletin I2715 rev. E 08/97 Thermal and Mechanical Specifications Parameters TJ Junction temperature range 100JB-L 26MB-A 36MB-A Units 250JB-L 35MB-A -40 to 150 -40 to 150 3.5 1.7 0.2 20 2.0 1.2 o o Conditions C C Per bridge Mounting surface , smooth, flat and greased Bridge to heatsink Tstg Storage temperature range RthJC Max. thermal resistance junction to case RthCS Max. thermal resistance, case to heatsink wt T Approximate weight Mounting Torque ± 10% K/W K/W g Nm Ordering Information Table Device Code 36 1 1 2 - MB 2 160 3 A 4 26 36 Current rating code: Circuit configuration: JB = Single phase american coding MB = Single phase european coding 100 & 250 & 35 = 10A (Avg) = 25A (Avg) = 35A (Avg) American coding European coding 3 4 - Voltage code: MB series = code x 10 = VRRM JB series = code x 100 = VRRM Diode bridge rectifier: A = 26MB, 36MB, 35MB Series L = 100JB and 250JB Series Outline Table Suggested plugging force: 200 N max; axially applied to faston terminals All dimensions in millimetres (inches) Not To Scale www.irf.com 3 MB & JB Series Bulletin I2715 rev. E 08/97 Maximum Allowable Case Temperature (°C) 150 1000 100JB..L Series 130 120 110 100 90 80 70 60 50 0 1 2 3 4 5 6 7 8 9 10 11 Average Forward Current (A) 180° (Sine) 180° (Rect) Instantaneous Forward Current (A) 140 T = 25°C J 100 TJ = 15O°C 10 100JB..L Series 1 0.5 1.5 2.5 3.5 Instantaneous Forward Voltage (V) Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics Maximum Average Forward Power Loss (W) 25 100JB..L Series T = 150°C J 20 R th 180° (Sine) 180° (Rect) 3K /W 4K /W /W 2K A S- = a elt -D /W 1K 15 7K /W R 10 10K /W 15K /W 5 0 0 2 4 6 8 10 0 25 50 75 100 125 150 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 3 - Total Power Loss Characteristics 150 Peak Half Sine Wave Forward Current (A) 150 Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated VRRM Applied Following Surge Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 125 120 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T = 150°C J No Voltage Reapplied Rated V RRM Reapplied 100 90 75 60 100JB..L Series 30 1 10 100 Numb of Equal Amplitude Half Cycle C er urrent Pulses (N) 50 100JB..L Series 25 0.01 0.1 Pulse Train Duration (s) 1 Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current 4 www.irf.com MB & JB Series Bulletin I2715 rev. E 08/97 Maximum Allowable Case Temperature (°C) 150 1000 Instantaneous Forward Current (A) 26MB..A Series 250JB..L Series 130 TJ= 25°C 100 TJ= 150°C 110 180° (Rect) 90 180° (Sine) 10 70 26MB..A Series 250JB..L Series 1 0.5 1 1.5 2 2.5 3 3.5 50 0 5 10 15 20 25 30 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics 50 Maximum Average Forward Power Loss (W) 26MB..A Series 250JB..L Series T = 150°C J R th SA 40 180° (Sine) 180° (Rect) = /W 1K 2 K/W a elt -D 30 3K /W 4K /W R 20 5K /W 7 K/W 10 10 K /W 0 0 5 10 15 20 0 25 25 50 75 100 125 150 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 8 - Total Power Loss Characteristics 400 Peak Half Sine W ave Forward Current (A) Peak Half S Wave Forward Current (A) ine At Any Rated Load Condition And With Rated V RRM Applied Following Surge Initial T J = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 450 350 300 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated VRRM Reapplied 250 200 150 26MB..A Series 250JB..L Series 50 0.01 0.1 Pulse Train Duration (s) 1 26MB..A series 250JB..L series 100 1 10 100 Number of Equal Amplitude Half Cycle Curre Pulse (N) nt s Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current www.irf.com 5 MB & JB Series Bulletin I2715 rev. E 08/97 150 Maximum Allowable Case Temperature (°C) 1000 Instantaneous Forward Current (A) 36MB..A Series 35MB..A Series TJ = 25°C TJ = 150°C 130 100 110 180° (Rect) 90 180° (Sine) 70 10 36MB..A Series 35MB..A Series 1 0.5 1 1.5 2 2.5 3 3.5 50 0 5 10 15 20 25 30 35 40 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 11 - Current Ratings Chracteristics Fig. 12 - Forward Voltage Drop Characteristics 80 Maximum Average Forward Power Loss (W) 36MB..A Series 35MB..A Series T = 150°C J 60 180° (Sine) 180° (Rect) 40 3 K/ W 4 K/W R th SA = 1K /W 0. 7 K/ W 2K /W -D el ta R 20 5 K/W 7 K/W 0 0 5 10 15 20 25 30 35 0 25 50 75 100 125 150 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 13 - Total Power Loss Characteristics Peak Half Sine W ave Forward Current (A) 400 350 300 250 200 150 100 1 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ= 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sine W ave Forward Current (A) 450 500 450 400 350 300 250 200 150 100 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150°C No Voltage Reapplied Rated VRRM Reapplied 36MB..A Series 35MB..A Series 10 100 36MB..A Series 35MB..A Series 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 14 - Maximum Non-Repetitive Surge Current Fig. 15 - Maximum Non-Repetitive Surge Current 6 www.irf.com