30CPQ080G

Bulletin PD-20818 11/05 30CPQ080G 30CPQ090G 30CPQ100G SCHOTTKY RECTIFIER 30 Amp IF(AV) = 30Amp VR = 80 to 100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 15 Apk, TJ=125°C (per leg) Description/ Features Units A V A V The 30CPQ...G center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 30 80 to 100 920 0.67 - 55 to 175 °C Case Styles 30CPQ...G Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 30CPQ080G 80 30CPQ090G 90 30CPQ100G 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 920 240 7.50 0.50 A mJ A 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 30CPQ... Units 30 A Conditions 50% duty cycle @ TC = 140°C, rectangular wave form TJ = 25 °C, IAS = 0.50 Amps, L = 60mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 30CPQ... Units 0.86 1.05 0.67 0.81 0.28 7 500 7.5 10000 V V V V mA mA pF nH @ 15A @ 30A @ 15A @ 30A TJ = 25 °C TJ = 125 °C Conditions TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (1) Pulse Width < 300µs, Duty Cycle