30CPQ150

Bulletin PD-20787 rev. A 11/06 30CPQ150PbF SCHOTTKY RECTIFIER 30 Amp IF(AV) = 30Amp VR = 150V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 μs sine VF TJ @ 15 Apk, TJ=125°C (per leg) Description/ Features Units A V A V The 30CPQ150PbF center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Value 30 150 1000 0.78 - 55 to 175 °C Case Styles Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 3 0CPQ150PbF Bulletin PD-20787 rev. A 11/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 30CPQ150PbF 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Device Per Leg 30CPQ Units 30 15 1000 340 11.25 0.50 A mJ A A Conditions 50% duty cycle @ TC = 135°C, rectangular wave form 5μs Sine or 3μs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) TJ = 25 °C, IAS = 0.50 Amps, L = 90 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 30CPQ Units 1.00 1.19 0.78 0.93 0.1 15 340 7.5 10000 V V V V mA mA pF nH V/ μs @ 15A @ 30A @ 15A @ 30A Conditions TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Series Inductance (1) (Per Leg) Max. Junction Capacitance (Per Leg) TJ = 25 °C TJ = 125 °C VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range (1) Pulse Width < 300μs, Duty Cycle