30L30CT-1

Bulletin PD-20555 rev. B 02/03 30L30CT 30L30CTS 30L30CT-1 SCHOTTKY RECTIFIER 30 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM VF TJ @ 15 Apk, TJ = 125°C (Per Leg) range - 55 to 150 °C 30 0.37 V V Description/ Features Units A This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 2 x 15 Case Styles 30L30CT 30L30CTS 30L30CT -1 Base Common Cathode 2 Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 Anode TO-220 www.irf.com D2PAK TO-262 1 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) 30L30CT 30L30CTS 30L30CT-1 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 2 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Per Device Per Leg Values 30 15 1450 220 15 Units Conditions A A mJ 50% duty cycle @ TC = 140°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and Max. Peak One Cycle Non-Repetitive 10ms Sine or 6ms Rect. pulse with rated VRRM applied TJ = 25 °C, IAS = 2 Amps, L = 7.5 mH Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Values 0.46 0.57 0.37 0.50 1.50 350 1500 8.0 10000 Units Conditions V V V V mA mA pF nH V/µs @ 15A @ 30A @ 15A @ 30A TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) Max. Junction Capacitance(Per Leg) Typical Series Inductance (Per Leg) VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300µs, Duty Cycle