30L30CTPBF

Bulletin PD-20847 10/04 30L30CTPbF SCHOTTKY RECTIFIER 30 Amp IF(AV) = 30Amp VR = 30V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM VF TJ @ 15 Apk, TJ = 125°C (Per Leg) range Description/ Features Units A V V This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Values 2 x 15 30 0.37 - 55 to 150 °C Case Styles 30L30CTPbF Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 30L30CTPbF Bulletin PD-20847 10/04 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) V RWM Max. Working Peak Reverse Voltage (V) 30L30CTPbF 30 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 2 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Per Device Per Leg Values 30 15 1450 220 15 Units Conditions A A mJ 50% duty cycle @ TC = 140°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and Max. Peak One Cycle Non-Repetitive 10ms Sine or 6ms Rect. pulse with rated VRRM applied TJ = 25 °C, IAS = 2 Amps, L = 7.5 mH Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) (Per Leg) Values 0.46 0.57 0.37 0.50 1.50 350 1500 8.0 10000 Units Conditions V V V V mA mA pF nH V/µs @ 15A @ 30A @ 15A @ 30A TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) Max. Junction Capacitance(Per Leg) Typical Series Inductance (Per Leg) VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300µs, Duty Cycle