30TPS16

Bulletin I2136 04/97 SAFEIR Series 30TPS.. PHASE CONTROL SCR VT ITSM < 1.3V @ 20A = 300A VRRM 800 to 1600V Description/Features The 30TPS.. SAFE IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125°C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Major Ratings and Characteristics Characteristics I T(AV) Sinusoidal waveform I RMS VRRM/ VDRM I TSM VT dv/dt di/dt TJ @ 20 A, TJ = 25°C 30 up to 1600 300 1.3 500 150 - 40 to 125 A V A V V/µs A/µs °C Package Outline Units A 30TPS.. 20 TO-247AC 1 30TPS.. SAFEIR Series Bulletin I2136 04/97 Voltage Ratings Part Number VRRM/VDRM, max. repetitive peak and off-state voltage V 30TPS08 30TPS12 30TPS16 800 1200 1600 VRSM , maximum non repetitive peak reverse voltage V 900 1300 1700 IRRM/IDRM 125°C mA 10 Absolute Maximum Ratings Parameters IT(AV) Max. Average On-state Current IRMS Max. RMS On-state Current ITSM Max. Peak One Cycle Non-Repetitive Surge Current I2t Max. I2 t for Fusing 30TPS.. 20 30 250 300 310 442 Units A Conditions @ TC = 95° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2 s 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A √s 2 I √t 2 Max. I √t for Fusing 2 4420 1.3 12 1.0 0.5 10 100 200 500 150 t = 0.1 to 10ms, no voltage reapplied @ 20A, TJ = 25°C TJ = 125°C VTM rt Max. On-state Voltage Drop On-state Slope Resistance V mΩ V mA VT(TO) Threshold Voltage IRM/I DM Max.Reverse and Direct Leakage Current IH IL Max. Holding Current Max. Latching Current TJ = 25 °C TJ = 125 °C VR = rated VRRM/ VDRM mA mA V/µs A/µs Anode Supply = 6V, Resistive load, Initial IT =1A Anode Supply = 6V, Resistive load dv/dt Max. Rate of Rise of off-state Voltage di/dt Max. Rate of Rise of turned-on Current 2 30TPS.. SAFEIR Series Bulletin I2136 04/97 Triggering Parameters PGM Max. Peak Gate Power PG(AV) Max. Average Gate Power + IGM Max. Peak Positive Gate Current - VGM Max. Peak Negative Gate Voltage IGT Max. Required DC Gate Current to Trigger 30TPS.. 8.0 2.0 1.5 10 60 45 20 Units W Conditions A V mA Anode supply = 6V, resistive load, T J = - 10°C Anode supply = 6V, resistive load, TJ = 25°C Anode supply = 6V, resistive load, TJ = 125°C V Anode supply = 6V, resistive load, TJ = - 10°C Anode supply = 6V, resistive load, TJ = 25°C Anode supply = 6V, resistive load, TJ = 125°C TJ = 125°C, VDRM = rated value mA TJ = 125°C, VDRM = rated value VGT Max. Required DC Gate Voltage to Trigger 2.5 2.0 1.0 VGD Max. DC Gate Voltage not to Trigger IGD Max. DC Gate Current not to Trigger 0.25 2.0 Switching Parameters tgt trr tq Typical Turn-on Time Typical Reverse Recovery Time Typical Turn-off Time 30TPS.. 0.9 4 110 Units µs T J = 25°C T J = 125°C Conditions Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 30TPS.. - 40 to 125 - 40 to 125 0.8 Units °C Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Max. Thermal Resistance Case to Heatsink wt T Approximate Weight Mounting Torque Min. Max. Case Style °C/W DC operation 40 0.2 Mounting surface, smooth and greased 6 (0.21) 6 (5) 12 (10) g (oz.) Kg-cm (lbf-in) Jedec (Modified) TO-247AC 3 30TPS.. SAFEIR Series Bulletin I2136 04/97 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 130 30TPS.. Series R thJC (DC) = 0.8 °C/W 130 30TPS.. Series R thJC (DC) = 0.8 °C/W 120 Conduction Angle 120 110 Conduction Period 110 30° 100 60° 90° 120° 180° 100 30° 90 60° 90° 120° 0 5 10 15 180° DC 25 30 35 90 0 5 10 15 20 25 Average On-state Current (A) 80 20 Average On-state Current (A) Fig. 1 - Current Rating Characteristics Maximum Average On-state Power Loss (W) Maximum Average On-state Power Loss (W) Fig. 2 - Current Rating Characteristics 80 DC 180 ° 120° 90° 60° 30° 60 50 40 30 20 10 0 0 5 10 15 20 25 30 Average On-state Current (A) 180° 120° 90° 60° 30° RMS Limit 60 40 RMS Limit Conduction Angle Conduction Period 20 30TPS.. Series T J = 125°C 0 0 10 20 30 40 50 Average On-state Current (A) 30TPS.. Series TJ = 125°C Fig. 3 - On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) 280 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. 260 Initial TJ = 125°C 240 220 200 180 160 140 120 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) 300 280 260 240 220 200 180 160 140 120 0.01 30TPS.. Series 0.1 Pulse Train Duration (s) 1 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125°C No Voltage Reapplied Rated VRRMReapplied @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 30TPS.. Series Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 4 30TPS.. SAFEIR Series Bulletin I2136 04/97 1000 Instantaneous On-state Current (A) T J= 25°C T J= 125°C 100 10 30TPS.. Series 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V) Fig. 7 - On-state Voltage Drop Characteristics Transient Thermal Impedance Z thJC (°C/W) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 Steady State Value (DC Operation) Single Pulse 30TPS.. Series 0.01 0.0001 0.001 0.01 Square Wave Pulse Duration (s) 0.1 1 Fig. 8 - Thermal Impedance ZthJC Characteristics 100 Instantaneous Gate Voltage (V) Rectangular gate pulse a )Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 µs, tp >= 6 µs b)Recommended load line for = 6 µs (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a) (b) TJ = -10 °C TJ = 25 °C TJ = 125 °C 1 VGD IGD 0.1 0.001 0.01 (4) (3) (2) (1) 30TPS.. Series 0.1 1 Frequency Limited by PG(AV) 10 100 Instantaneous Gate Current (A) Fig. 9 - GateCharacteristics 5 30TPS.. SAFEIR Series Bulletin I2136 04/97 Outline Table 3. 65 (0 .144) 15.90 (0 .626 ) 15.30 (0 .602 ) 5.70 ( 0.22 5) 5.30 ( 0.208) 20 .30 ( 0.800) 19 .70 ( 0.775) 5.50 ( 0.217) 4. 50 ( 0.17 7) 1 2 3 (2 PLC S.) 3. 55 (0 .139) DIA. 5.30 ( 0.20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 14.80 ( 0.583) 14 .20 (0 .559) 4. 30 (0 .170) 3. 70 (0 .145) 2.20 ( 0.08 7) 2. 40 (0 .095) M AX. 0.80 ( 0.032) 0. 40 (0 .213) 1. 40 (0 .056) MAX . 1. 00 (0 .039) 10. 94 ( 0.430) 10 .86 ( 0.427) Dimensions in millimeters and inches Ordering Information Table Device Code 30 1 1 2 3 4 5 - T 2 P 3 S 4 16 5 2 (A) Current Rating Circuit Configuration: T = Thyristor Package: T = TO-247 Type of Silicon: S = Standard Recovery Rectifier Voltage code: Code x 100 = VRRM 08 = 800V 12 = 1200V 16 = 1600V 1 (K) (G) 3 6