47LR160D

Bulletin I2030 rev. A 11/94 45L(R)..D SERIES STANDARD RECOVERY DIODES Stud Version Features Diffused diode High current carrying capability High voltage ratings up to 1600V High surge current capabilities Stud cathode and stud anode version 150A Typical Applications Converters Power supplies Machine tool controls High power drives Medium traction applications Major Ratings and Characteristics Parameters IF(AV) @ TC IF(RMS) IFSM @ 50Hz @ 60Hz It 2 45L(R)..D 150 150 235 3570 3740 64 58 1200 to 1600 - 40 to 200 Units A °C A A A KA2s KA2s V °C @ 50Hz @ 60Hz V RRM range TJ case style DO-205AC (DO-30) www.irf.com 1 45L(R)..D Series Bulletin I2030 rev. A 11/94 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 120 45L(R)..D 160 1600 1920 V RRM , maximum repetitive peak reverse voltage V 1200 VRSM , maximum nonrepetitive peak rev. voltage V 1440 I RRM max. @ TJ = TJ max. mA 40 Forward Conduction Parameter IF(AV) Max. average forward current @ Case temperature IF(RMS) Max. RMS forward current IFSM Max. peak, one-cycle forward, non-repetitive surge current 45L(R)..D 150 150 235 3570 3740 3000 3140 Units A °C A Conditions 180° conduction, half sine wave DC @ 142°C case temperature t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. A t = 10ms t = 8.3ms t = 10ms t = 8.3ms I2 t Maximum I2t for fusing 64 58 45 41 KA2 s t = 10ms t = 8.3ms I2 √ t Maximum I2√ t for fusing 640 0.67 KA2√ s t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf 1 rf 2 Low level value of forward slope resistance High level value of forward slope resistance VFM Max. forward voltage drop V 0.83 (I > x π x IF(AV)),T J = TJ max. (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. mΩ 0.91 1.33 V (I > x π x IF(AV)),TJ = TJ max. I = 471A, TJ = 25°C, t = 10ms sinusoidal wave pk p 1.42 2 www.irf.com 45L(R)..D Series Bulletin I2030 rev. A 11/94 Thermal and Mechanical Specifications Parameter TJ T stg 45L(R)..D -40 to 200 -40 to 200 0.25 0.10 17 Units °C Conditions Max. junction operating temperature Max. storage temperature range Max. thermal resistance, junction to case Max. thermal resistance, case to heatsink Max. allowed mounting torque +0 -20% RthJC RthCS T DC operation K/W Nm Mounting surface, smooth, flat and greased Not lubricated threads Lubricated threads g See Outline Table 14.5 wt Approximate weight Case style 130 DO-205AC (DO-30) ∆RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle 180° 120° 90° 60° 30° Sinusoidal conduction 0.031 0.038 0.048 0.071 0.120 Rectangular conduction Units 0.023 0.040 0.053 0.075 0.121 K/W Conditions TJ = TJ max. Ordering Information Table Device Code 45 1 L 2 F 3 R 4 160 5 D 6 1 - 45 47 48 L = Standard version = Version with Pinch Bolt (only flat base) = Flag Top Terminal = Essential Part Number 2 3 4 5 6 -- F = Flat Base None = Normal Stud R = Stud Reverse Polarity (Anode to Stud) None = Stud Normal Polarity (Cathode to Stud) Voltage code: Code x 10 = VRRM (See Voltage Ratings table) D = Diffused diode www.irf.com 3 45L(R)..D Series Bulletin I2030 rev. A 11/94 Outline Table GLASS-METAL SEAL 16.5 (0.65) MAX. GLASS-METAL SEAL 16.5 (0.65) MAX. DIA. 8.5 (0.33) DIA. 8.5 (0.33) 162 (6.38) MAX. DIA. 23 (0.91) MAX. 162 (6.38) MAX. DIA. 23 (0.91) MAX. 24 (0.94) MAX. 8.5 (0.33) MAX. 24 (0.94) MAX. 16 (0.63) MAX. 45L 45LF DO-205AC (DO-30) Flat Base 31 (1.22) DO-205AC (DO-30) 1/2"-20UNF-2A* 27 (1.06) 2.6 (0.10) All dimensions in millimeters (inches) GLASS-METAL SEAL 16.5 (0.65) 5.6 (0.22) DIA. 5.54 (0.22) 9.5 (0.37) 3 7 (1 .46) MAX. DIA. 23 (0.91) MAX. 32.5 (1.28) 24 (0.94) MAX. 16 (0.63) MAX. 8.5 (0.33) MAX. 48L IR Case Style B31 1/2"-20UNF-2A* 4 27 (1.06 ) 2. 4 (0.09) www.irf.com 2.6 (0.10) 2 7 (1.06) 8.5 (0.33) MAX. 45L(R)..D Series Bulletin I2030 rev. A 11/94 Outline Table Spring Clamp 60 (2.36) 24 (0.94) FULL RAD. 22.8 (0.89) 6 (0.23) 40 (1.57) GLASS-METAL SEAL DIA. 11.15 (0.44) MAX. 7 (0.27) 45 (1.77) MAX. (0.35) 9 48 (1.88) 24 (0.94) MAX. Pinch Bolt 41 (1.61) 24 (0.94) 2.4 (0.09) 27 (1.06) 20 (0.78) DIA. 11.25 (044) 5.5 (0.21) DIA. 47LF IR Case Style B52 Flat Base 13 (0.51) 9 (0.35) ± 0.1 (0.004) DIA. 16 (0.62) 33 (1.29) All dimensions in millimeters (inches) Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 200 190 180 Conduction Angle 200 190 180 45L(R)..D Series R thJC (DC) = 0.25 K/W 45L(R)..D Series R thJC (DC) = 0.25 K/W Conduction Period 170 160 30 ° 150 140 0 20 40 60 80 60° 90° 120° 180° 100 120 140 160 170 160 30° 150 140 0 50 100 60° 90° 120° 180° 150 DC 200 250 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Average Forward Current (A) Fig. 2 - Current Ratings Characteristics DIA. www.irf.com 5 45L(R)..D Series Bulletin I2030 rev. A 11/94 Maximum Average Forward Power Loss (W) 180 160 140 120 100 80 60 Conduction Angle 180° 120° 90° 60° 30° RMS Limit R thSA 0 .4 0. 3 0. 2 6 0. W K/ K/ W 0. 8 1K /W 1 .5 K/ W K/ W W K/ K /W .1 K =0 /W elta -D R 2K /W 3 K/ W 40 20 0 0 40 80 45L(R)..D Series TJ = 200°C 120 160 25 50 75 100 125 150 175 200 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 3 - Forward Power Loss Characteristics Maximum Average Forward Power Loss (W) 250 DC 180° 120° 90° 60° 30° R th S 0. 2 3 0. W K/ 4 0. W K/ A 200 W K/ 0. 6 K/ W =0 .1 W K/ elt -D 150 0.8 1K K/ W /W K/ W a R 100 RMS Limit Conduction Period 1 .5 2 K/ W 50 45L(R)..D Series TJ = 200°C 3 K/W 0 0 50 100 150 200 250 25 50 75 100 125 150 175 200 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Peak Half Sine Wave Forward Current (A) 3500 3000 2500 2000 1500 1000 4000 3500 3000 2500 2000 1500 1000 500 0.01 Initial TJ = 200°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 200°C No Voltage Reapplied Rated VRRM Reapplied 45L(R)..D Series 500 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 45L(R)..D Series 0.1 Pulse Train Duration (s) 1 Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 6 www.irf.com 45L(R)..D Series Bulletin I2030 rev. A 11/94 10000 Instantaneous Forward Current (A) 1000 100 TJ = 25 °C TJ = 200°C 45L(R)..D Series 10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value R thJC = 0.25 K7W (DC Operation) Transient Thermal Impedance Z thJC (K/W) 0.1 4 5L(R)..D Series 0.01 0.001 0.01 0. 1 Square Wave Pulse Duration (s) 1 10 Fig. 8 - Thermal Impedance ZthJC Characteristic www.irf.com 7