48CTQ060S

PD-20545 rev. B 11/99 48CTQ060 48CTQ060S 48CTQ060-1 SCHOTTKY RECTIFIER 40 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 20 Apk, TJ = 125°C (per leg) range 60 1000 0.58 V A V Description/Features Units A This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150°C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 40 - 55 to 150 °C Case Styles 48CTQ060 48CTQ060S 48CTQ060-1 TO-220 D2PAK TO-262 www.irf.com 1 48CTQ060, 48CTQ060S, 48CTQ060-1 PD-20545 rev. B 11/99 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 48CTQ060 48CTQ060S 48CTQ060-1 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) Values 20 40 1000 260 13 1.50 Units A Conditions 50% duty cycle @ TC = 111°C, rectangular wave form Following any rated 5µs Sine or 3µs Rect. pulse load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 °C, IAS = 1.50 Amps, L = 11.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by T J max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Values 0.61 0.83 0.58 0.75 2 89 0.37 8.26 1220 8.0 10,000 Units V V V V mA mA V mΩ Conditions @ 20A @ 40A @ 20A @ 40A TJ = 25 °C TJ = 125 °C TJ = T J max. TJ = 25 °C TJ = 125 °C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH V/ µs VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle