50WQ03FNTR

Bulletin PD-21091 rev. B 08/06 50WQ03FNPbF SCHOTTKY RECTIFIER 5.5 Amp IF(AV) = 5.5Amp VR = 30V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 μs sine VF TJ @ 5 Apk, TJ = 125°C range Description/ Features Units A V A V °C The 50WQ03FNPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface moutable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Values 5.5 30 320 0.35 - 40 to 150 Case Styles Base Cathode 4, 2 1 3 Anode Anode D-PAK (TO-252AA) www.irf.com 1 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) 50WQ03FNPbF Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 320 130 10 2.0 A mJ A 5μs Sine or 3μs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied 50WQ... 5.5 Units A Conditions 50% duty cycle @ TC = 136°C, rectangular wave form TJ = 25 °C, IAS = 2.0 Amps, L = 5 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 50WQ... 0.46 0.53 0.35 0.46 Units V V V V mA mA V mΩ Conditions @ @ 5A 5A @ 10A @ 10A TJ = 25 °C TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C VR = rated VR IRM Max. Reverse Leakage Current * See Fig. 2 (1) 3 58 0.19 22.22 590 5.0 VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typical Junction Capacitance Typical Series Inductance pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25 °C Measured lead to lead 5mm from package body (1) Pulse Width < 300μs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range (*) Max. Storage Temperature Range 50W... -40 to 150 -40 to 150 3.0 0.3 (0.01) Units °C °C °C/W DC operation g (oz.) Conditions RthJC Max. Thermal Resistance Junction to Case wt Approximate Weight Case Style Marking Device (*) dPtot dTj < 1 Rth( j-a) * See Fig. 4 D - PAK 50WQ03FN Similar to TO-252AA thermal runaway condition for a diode on its own heatsink 2 www.irf.com 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 100 1000 100 10 1 0.1 0.01 0.001 TJ= 150°C 125°C 100°C 75°C 50°C 25°C Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) 0 5 10 15 20 25 30 10 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1000 TJ = 150°C TJ = 125°C TJ = 25°C Junct ion Ca pacitanc e - C T (pF) TJ = 25°C 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 100 0 5 10 15 20 25 30 35 Forward Voltage Drop - VFM (V) Reverse Voltage - VR (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 T hermal Impedance Z thJC (°C/ W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 S ingle Pulse (T hermal Resistance) 0.01 0.00001 Notes: t1 t2 1. Duty factor D = t 1/ t 2 2. Peak T = PDM x Z thJC+ TC J 0.01 0.1 1 0.0001 0.001 t 1 , Rectangular Pulse Duration (S econds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 150 Allowable Case T emperature - (°C) 3.5 Average Power Loss - (Wa tts) DC 145 140 135 130 125 se e note (2) 3 2.5 2 1.5 1 0.5 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC S quare wave (D = 0.50) 80% Rated V R applied 120 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 1000 At Any Rated Load Condition And With Rated V RRM Applied Following S urge Fig. 6 - Forward Power Loss Characteristics Non-Repetitive S urge Current - I FS (A) M 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 Outline Table Modified JEDEC outline TO-252AA Dimensions in millimeters and (inches) Part Marking Information THIS IS A 50WQ03FN INTERNATIONAL RECTIFIER LOT CODE 8024 LOGO ASSEMBLED ON WW 02, 2000 ASSEMBLY LOT CODE PART NUMBER 50WQ03FN DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 02 X = SITE ID www.irf.com 5 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 Tape & Reel Information 4.1 (0.16) 3.9 (0.15) TR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 12.1 (0.48) 11.9 (0.47) 2.6 (0.10) DIA. 1.5 (0.06) 0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62) 7.0 (0.28) 6.8 (0.26) 2.75 (0.11) 2.55 (0.10) FEED DIRECTION 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) 16.3 (0.64) 15.7 (0.62) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 13 (0.52) DIA. 22.4 (0.88) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 375 (14.17) DIA. MAX. 50 (1.97) DIA. 6 www.irf.com 50WQ03FNPbF Bulletin PD-21091 rev. B 08/06 Ordering Information Table Device Code 50 1 W 2 Q 3 03 4 FN TRL PbF 5 6 7 1 2 4 3 4 5 6 - Current Rating (5.5A) Package Identifier W = D-Pak Schottky "Q" Series Voltage Rating (03 = 30V) FN = TO-252AA (D-Pak) none = Tube (50 pieces) TR = Tape & Reel TRL = Tape & Reel (Left Oriented) TRR = Tape & Reel (Right Oriented) 7 - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for AEC Q101 Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/06 www.irf.com 7