60CIQ045

PD -20357C SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 60CIQ045 45A*, 45V Description/Features Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM (Per Leg) IFSM @ tp = 8.3ms half-sine (Per Leg) VF @ 25Apk, TJ =125°C (Per Leg) 60CIQ045 Units 45* 45 400 0.62 A V A V °C The 60CIQ045 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hi-rel environments. It is packaged in the hermetic isolated TO-259AA package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source controlled drawings to TX, TXV and S levels. • • • • • Hermetically Sealed Center Tap Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long Term Reliability • 2 Interdigitated mounting tabs for secured, intimate heatsink contact • Electrically Isolated TJ, Tstg Operating and storage -55 to 150 *IF(AV) current is limited by pin diameter CASE STYLE (ISOLATED BASE) 1 2 3 ANODE COMMONANODE CATHODE IR Case Style TO-259AA www.irf.com 1 02/27/02 60CIQ045 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) (Per Leg) VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) 60CIQ045 45 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current See Fig. 5 I FSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) 400 A Limits 45* Units A Conditions 50% duty cycle @ TC = 100°C, rectangular waveform *IF(AV) current is limited by pin diameter @ tp = 8.3 ms half-sine Electrical Specifications Parameters V FM Max. Forward Voltage Drop (Per Leg) See Fig. 1Q Limits 0.71 0.92 0.62 0.85 Units V V V V mA mA pF nH @ 25A @ 45A @ 25A @ 45A TJ = 25°C TJ = 125°C Conditions TJ = 25°C TJ =1 25°C VR = rated VR I RM CT LS Max. Reverse Leakage Current (Per Leg) See Fig. 2 Q Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 0.8 45 2600 8.7 VR = 5VDC ( 1MHz, 25°C ) Measured from anode lead to cathode lead 6mm ( 0.025 in.) from package Thermal-Mechanical Specifications Parameters TJ Tstg Max.Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) RthJC Max. Thermal Resistance, Junction to Case (Per Package) wt Weight (Typical) Die Size Case Style 10.5 150X150 TO-259AA g mils 0.42 °C/W DC operation Limits Units -55 to 150 -55 to 150 0.83 °C °C °C/W DC operation Conditions RthJC Max. Thermal Resistance, Junction See Fig. 4 Q Pulse Width < 300µs, Duty Cycle < 2% 2 www.irf.com 60CIQ045 100 T = 1 50 ° C J 125 ° C 10 100 ° C 1 0.1 25 ° C 0.01 A 0 10 20 30 40 50 0.001 R e v e rse V o ltag e - V R (V ) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 60CIQ045 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 60CIQ045 R thJC (DC) = 0.42°C/W Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 02/02 4 www.irf.com