60EPS12

Bulletin I2176 rev A 07/06 SAFEIR Series 60EPS...PbF INPUT RECTIFIER DIODE Lead-Free ("PbF" suffix) VF < 1V @ 30A IFSM = 950A VRRM = 800 to 1200V Description/ Features The 60EPS...PbF rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 30A, TJ = 25°C Package Outline Units A V A V °C Values 60 800 - 1200 950 1.0 - 40 to 150 TO-247AC (Modified) www.irf.com 1 60EPS...PbF SAFEIR Series Bulletin I2175 rev A 07/06 Voltage Ratings VRRM , maximum Part Number peak reverse voltage V 1000 1200 VRSM , maximum non repetitive peak reverse voltage V 1100 1300 IRRM 150°C mA 1 1 60EPS10PbF 60EPS12PbF Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing 60EPS.. 60 950 1100 4512 6300 Units A A A2s A √s 2 Conditions @ TC = 118° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I √t 2 Max. I √t for fusing 2 63000 Electrical Specifications Parameters VFM rt Max. Forward Voltage Drop Forward slope resistance 60EPS.. 1.09 3.96 0.74 0.1 1.0 Units V mΩ V mA Conditions @ 60A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VF(TO) Threshold voltage IRM Max. Reverse Leakage Current VR = rated VRRM Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 60EPS.. - 40 to 150 - 40 to 150 0.35 40 0.2 6 (0.21) Min. Max. 6 (5) 12 (10) Units °C °C °C/W °C/W °C/W g (oz.) Kg-cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque DC operation Mounting surface , smooth and greased Case Style TO-247AC JEDEC (Modified) 2 www.irf.com 60EPS...PbF SAFEIR Series Bulletin I2122 rev A 07/06 Maximum Allowable Case Temperature (°C) 150 60EPS.. Series RthJC (DC) = 0.35 K/W 140 150 60EPS.. Series RthJC (DC) = 0.35 K/W 140 Conduction Period 130 Conduction Angle Maximum Allowable Case Temperature (°C) 130 30° 60° 90° 120 110 30° 100 0 10 20 30 90° 60° 120° 180° 40 50 60 70 120 120° 180° DC 110 0 20 40 60 80 100 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° RMS Limit 50 40 Conduction Angle Fig. 2 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 110 100 90 80 70 60 50 RMS Limit 40 30 20 10 0 0 20 40 60 80 100 Average Forward Current (A) Conduction Period 90 80 70 60 DC 180° 120° 90° 60° 30° 30 20 10 0 0 10 20 30 40 50 60 70 Average Forward Current (A) 60EPS.. Series TJ = 150°C 60EPS.. Series TJ = 150°C Fig. 3 - Forward Power Loss Characteristics 1000 Peak Half Sine Wave Forward Current (A) 900 800 700 600 500 400 300 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - Forward Power Loss Characteristics 1200 Peak Half Sine Wave Forward Current (A) Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1000 No Voltage Reapplied Rated V RRM Reapplied 800 600 400 60EPS.. Series 200 0.01 0.1 Pulse Train Duration (s) 1 60EPS.. Series Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current www.irf.com 3 60EPS...PbF SAFEIR Series Bulletin I2175 rev A 07/06 1000 Instantaneous Forward Current (A) 100 T = 25°C J 10 TJ = 150°C 60EPS.. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (K/W) 1 Steady State Value (DC Operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 60EPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 60EPS...PbF SAFEIR Series Bulletin I2122 rev A 07/06 Outline Table 3. 65 (0 .14 4) 15 .90 (0 .626 ) 15 .30 (0 .602 ) 5. 70 (0 .22 5) 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 3 (2 PLCS.) 3. 55 (0 .13 9) DIA. 5. 30 (0 .20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 14. 80 ( 0.583) 14 .20 (0 .559 ) 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) 2. 40 (0 .09 5) MAX. 0.80 ( 0.032) 0. 40 (0 .21 3) BASE CATHODE 1. 40 (0 .05 6) M AX . 1. 00 (0 .03 9) 10. 94 ( 0.430) 10 .86 (0 .427 ) 2 Dimensions in millimeters and inches 1 CATHODE 3 ANODE Marking Information EXAMPLE: THIS IS A 60EPS12 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 60EPS12 P035H 56 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H www.irf.com 5 60EPS...PbF SAFEIR Series Bulletin I2175 rev A 07/06 Ordering Information Table Device Code 60 1 1 2 3 4 5 6 - E 2 P 3 S 4 12 PbF 5 6 Current Rating (60 = 60A) Circuit Configuration: E = Single Diode Package: P = TO-247AC (Modified) Type of Silicon: S = Standard Recovery Rectifier Voltage Code X 100 = VRRM none = Standard Production PbF = Lead-Free 10 = 1000V 12 = 1200V Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/06 6 www.irf.com