Bulletin PD-20528 rev. E 03/03
6CWQ06FN
SCHOTTKY RECTIFIER 7 Amp
D-Pak (TO-252AA)
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 3 Apk, TJ = 25°C (per leg) range - 40 to 150 °C 60 490 0.61 V A V 6CWQ06FN 7
Description/ Features Units
A The 6CWQ06FN surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
2.38 (0.09) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20)
4
2.19 (0.08)
1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02)
MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24)
1.27 (0.05) 0.88 (0.03)
6.45 (0.24) 6.22 (0.24) 1.64 (0.02)
1 2 3
5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.51 (0.02) MIN.
6.48 (0.26) 10.67 (0.42)
5.97 (0.23)
1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 1 2 3 4 - Anode - Cathode - Anode - Cathode 3x 0.89 (0.03) 0.64 (0.02)
2x 2.54 (0.10) 1.65 (0.06) 2x 2.28 (0.09) 2x
Base Common Cathode
4
0.58 (0.02) 0.46 (0.02)
Conform to JEDEC outline D-Pak (Similar to TO-252AA) Dimensions in millimeters and (inches)
1
Anode
2 Common Cathode
3
Anode
www.irf.com
1
6CWQ06FN
Bulletin PD-20528 rev. E 03/03
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V)
6CWQ06FN
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward (Per Leg) Current * See Fig. 5 IFSM EAS IAR (Per Device) Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7 Non-Repet. Avalan. Energy (Per Leg) Repetitive Avalanche Current (Per Leg)
6CWQ... Units
3.5 7 490 70 6.0 1.0 A mJ A A
Conditions
50% duty cycle @ TC = 133°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied
TJ = 25 °C, IAS = 1 Amp, L = 12 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1)
6CWQ... Units
0.61 0.76 0.53 0.65 2 30 0.38 34.31 145 5.0 10000 V V V V mA mA V
mΩ
Conditions
@ @ @ @ 3A 6A 3A 6A TJ = 25 °C TJ = 125 °C VR = rated VR
IRM
Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1)
TJ = 25 °C TJ = 125 °C
TJ = TJ max.
VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typ. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg)
pF nH V/µs
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (Rated VR)
dv/dt Max. Voltage Rate of Change
(1) Pulse Width < 300µs, Duty Cycle
很抱歉,暂时无法提供与“6CWQ06FN”相匹配的价格&库存,您可以联系我们找货
免费人工找货