6CWQ10GTRR

Preliminary Data Sheet PD-20986 09/04 6CWQ10G SCHOTTKY RECTIFIER 7 Amp IF(AV) = 7Amp VR = 100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 3 Apk, TJ = 125°C range Description/ Features Units A V A V The 6CWQ10G surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 7 100 440 0.63 (per leg) - 40 to 150 °C Case Styles 6CWQ10G Base Common Cathode 4 1 Anode 2 Common Cathode 3 Anode D-PAK 1 6CWQ10G Preliminary Data Sheet PD-20986 09/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 6CWQ10G 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current * See Fig. 5 IFSM EAS IAR (Per Device) Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetit. Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 6CWQ... Units 3.5 7 440 70 5.0 0.5 A mJ A A Conditions 50% duty cycle @ TC = 135°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 °C, IAS = 1 Amp, L = 10 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 6CWQ... Units 0.81 0.96 0.63 0.74 V V V V mA mA V mΩ Conditions @ 3A @ 6A @ 3A @ 6A TJ = 25 °C TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) 0.15 4.9 0.48 30.89 92 5.0 10000 VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typ. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH V/µs VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300µs, Duty Cycle