80CPQ150PBF

Bulletin PD-20811 rev. A 11/06 80CPQ150PbF SCHOTTKY RECTIFIER 80 Amp IF(AV) = 80Amp VR = 150V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 μs sine VF TJ @ 40 Apk, TJ=125°C Description/ Features Units A V A V The 80CPQ150PbF center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Values 80 150 1930 0.71 (per leg) - 55 to 175 °C Case Styles Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 80CPQ150PbF Bulletin PD-20812 Rev. A 11/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 80CPQ150PbF 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Device Per Leg 80CPQ Units 80 40 1930 500 0.5 1.0 A mJ A A Conditions 50% duty cycle @ TC = 150°C, rectangular wave form 5μs Sine or 3μs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 °C, IAS = 1.0 Amps, L = 1 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Typ. 0.82 0.97 0.67 0.80 Max. Units 0.86 1.09 0.71 0.85 200 26 1100 7.5 10000 V V V V μA mA pF nH V/ μs Conditions @ 40A @ 80A @ 40A @ 80A TJ = 25 °C TJ = 125 °C @ 25°C TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 10 12 - VR = 5VDC (test signal range 100kHz to 1Mhz) Measured lead to lead 5mm from pack. body (Rated VR) (1) Pulse Width < 300μs, Duty Cycle < 2% dv/dt Max. Voltage Rate of Change Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 80CPQ Units -55 to 175 -55 to 175 0.6 0.3 0.24 6 (0.21) Min. Max. 6 (5) 12 (10) °C °C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style Marking Device °C/W DC operation °C/W DC operation * See Fig. 4 °C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) TO-247AC(TO-3P) JEDEC 80CPQ150 2 www.irf.com 80CPQ150PbF Bulletin PD-20812 rev. A 11/06 1000 1000 Tj = 175˚C Reverse Current - IR (mA) 100 10 1 0.1 0.01 150˚C 125˚C 100˚C 75˚C 50˚C 25˚C Instantaneous Forward Current - I F (A) 100 Tj = 175˚C Tj = 125˚C Tj = 25˚C 0.001 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25˚C 10 Junction Capacitance - CT (pF) J 1 0 0.5 1 1.5 2 2.5 3 Forward Voltage Drop - V FM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 Thermal Impedance Z thJC (°C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 t 1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x Z thJC + Tc 0.01 0.00001 0.0001 0.001 0.01 t1 , Rectangular Pulse Duration (Seconds) 0.1 1 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 80CPQ150PbF Bulletin PD-20812 Rev. A 11/06 180 Allowable Case temperature (°C) 50 Average Power Loss (Watts) 170 DC 40 30 160 150 140 Square wave (D = 0.50) 80% Rated Vr applied D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS Limit 20 10 0 0 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 130 120 0 see note (2) 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 + DUT IR FP460 R = 25 ohm g Vd = 25 Volt CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 80CPQ150PbF Bulletin PD-20812 rev. A 11/06 Outline Table Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 80CPQ150 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 80CPQ150 P035H 56 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H www.irf.com 5 80CPQ150PbF Bulletin PD-20812 Rev. A 11/06 Ordering Information Table Device Code 80 1 C 2 P 3 Q 4 150 PbF 5 6 1 2 3 4 5 6 - Current Rating (80 = 80A) Circuit Configuration C = Common Cathode Package P = TO-247 Schottky "Q" Series Voltage Code (150 = 150V) none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 25 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/06 6 www.irf.com