80SCLQ060

PD -94248 SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 80SCLQ060 80 Amp, 60V Major Ratings and Characteristics Characteristics IF(AV) VRRM (Per Leg) IFSM @ tp = 8.3ms half-sine (Per Leg) VF @ 40Apk, TJ =125°C (Per Leg) 80SCLQ060 Units 80 60 A V Description/Features The 80SCLQ060 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hirel environments. It is packaged in the hermetic surface mount SMD-1 ceramic package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels. • • • • • Hermetically Sealed Center Tap Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability • Surface Mount • Lightweight 400 0.64 A V TJ, Tstg Operating and storage -55 to 150 °C CASE STYLE 2 1 3 ANODE COMMONANODE CATHODE IR Case Style SMD-1 www.irf.com 1 07/05/01 80SCLQ060 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) (Per Leg) VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) 80SCLQ060 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) 400 A @ tp = 8.3 ms half-sine Limits 80 Units A Conditions 50% duty cycle @ TC = 102 °C, square waveform Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) See Fig. 1 Q Limits 0.7 0.89 0.68 0.95 0.64 0.81 Units V V V V V V mA mA mA pF nH @ 40A @ 80A @ 40A @ 80A @ 40A @ 80A TJ = 25°C TJ = 100°C TJ = 125°C Conditions TJ = -55°C TJ = 25°C TJ = 125°C I RM Max. Reverse Leakage Current (Per Leg) See Fig. 2Q 0.2 64 180 VR = rated VR CT LS Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 1410 5.9 VR = 5VDC ( 1MHz, 25°C ) Measured from center of cathode pad to center of anode pad Thermal-Mechanical Specifications Parameters TJ Tstg Max.Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) RthJC Max. Thermal Resistance, Junction to Case (Per Package) wt Weight (Typical) Die Size (Typical) Case Style Q Pulse Width < 300µs, Duty Cycle < 2% 2.6 150X180 SMD-1 g mils 0.63 °C/W DC operation Limits Units -55 to 150 -55 to 150 1.25 °C °C °C/W DC operation Conditions RthJC Max. Thermal Resistance, Junction See Fig. 4 2 www.irf.com 80SCLQ060 1000 100 125°C 100°C Reverse Current - I R ( mA ) 10 75°C 1 100 0.1 25°C 0.01 0.001 0 10 20 30 40 50 60 Reverse Voltage - VR (V) Instantaneous Forward Current - I F (A) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) 10 10000 Tj = 125°C Junction Capacitance - C T (pF) Tj = 25°C Tj = -55°C 1000 T J = 25°C 1 0.0 0.2 0.4 0.6 0.8 1.0 Forward Voltage Drop - V F (V) 100 Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 0 10 20 30 40 50 60 Reverse Voltage -V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 80SCLQ060 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01  0.0001 SINGLE PULSE (THERMAL RESPONSE) 0.01 0.00001  Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 0.001 0.01  PDM t1 t2 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 180 160 80SCLQ060 R thJC = 0.63°C/W Allowable Case Temprature - (°C) 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 DC Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 07/01 4 www.irf.com