88CNQ060ASM

Bulletin PD-20058 rev. B 01/02 88CNQ060A Series SCHOTTKY RECTIFIER New GenIII D-61 Package Description/Features The 88CNQ060A center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150°C junction temperature. Typical applications are in switching power supplies, converters, free wheeling diodes, and reverse battery protection. 150 °C TJ operation Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation - 55 to 150 °C Guard ring for enhanced ruggedness and long term reliability 80 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 µs sine @ 40 Apk, TJ= 125 °C (per leg) range 88CNQ...A Units 80 60 5000 0.56 A V A V New fully transfer-mold low profile, small footprint, high current package Case Styles 88CNQ...A 88CNQ...ASM 88CNQ...ASL D61-8 www.irf.com D61-8-SM D61-8-SL 1 88CNQ060A Series Bulletin PD-20058 rev. B 01/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 88CNQ060A 60 Absolute Maximum Ratings Parameters IF(AV) Max. Av.Forward Current (Per Leg) See Fig. 5 (Per Device ) IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 88CNQ Units 40 80 5000 600 75 1.0 A Conditions 50% duty cycle @ TC = 120°C, rectangular wave form (Rated VR ) 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated Vr applied TJ = 25 °C, IAS = 1 Amps, L = 0.57 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) 88CNQ Units 0.58 0.77 0.56 0.67 0.64 240 5200 5.5 10000 V V V V mA mA pF nH V/ µs @ 40A @ 80A @ 40A @ 80A Conditions TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Typical Reverse Leakage Current (Per Leg) See Fig. 2 (1) (Per Leg) Max. Junction Capacitance (Per Leg) Typical Series Inductance TJ = 25 °C TJ = 125 °C VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle