8ETX06S

Bulletin PD-20766 rev. B 02/04 8ETX06 8ETX06S 8ETX06-1 8ETX06FP Hyperfast Rectifier Features • • • • • Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature UL E78996 approved trr = 15ns typ. IF(AV) = 8Amp VR = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM IFM TJ, TSTG Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 143°C @ TC = 106°C (FULLPACK) Non Repetitive Peak Surge Current @ TJ = 25°C Peak Repetitive Forward Current Operating Junction and Storage Temperatures 110 18 - 65 to 175 °C Max 600 8 Units V A Case Styles 8ETX06 8ETX06S 8ETX06-1 8ETX06FP Base Cathode 2 Base Cathode 2 2 1 1 3 3 1 3 1 3 Cathode Anode Cathode Anode N/C Anode N/C Anode TO-220AC www.irf.com D2PAK TO-262 TO-220 FULLPACK 1 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 2.3 1.4 0.3 35 17 8.0 3.0 1.7 50 500 V V V µA µA pF nH IR = 100µA IF = 8A, TJ = 25°C IF = 8A, TJ = 150°C VR = VR Rated TJ = 150°C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 15 16 17 40 2.3 4.5 20 100 31 12 195 19 24 ns A nC TJ = 125°C nC A ns IF = 1A, diF/dt = 100A/µs, VR = 30V IF = 8A, diF/dt = 100A/µs, VR = 30V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C IF = 8A diF /dt = 600A/µs VR = 390V IF = 8A diF /dt = 200A/µs VR = 390V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - trr IRRM Qrr Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA RthCS Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Mounting Torque Per Leg Per Leg (Fullpack) Per Leg Min - 65 6.0 5.0 Typ 1.4 3.4 0.5 2.0 0.07 - Max 175 175 2 4.3 70 12 10 Units °C °C/W g (oz) Kg-cm lbf.in Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 100 Reverse Current - I R (µA) 1000 100 10 1 0.1 0.01 25˚C T J = 175˚C 150˚C 125˚C 100˚C Instantaneous Forward Current - I F (A) 10 0.001 T J = 175˚C T = 150˚C J T = 25˚C J Junction Capacitance - C T (pF) 0 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000 T = 25˚C J 1 100 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 10 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance Z thJC (°C/W) 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: PDM t1 t2 0.1 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 www.irf.com 3 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 10 Thermal Impedance Z thJC (°C/W) 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) PDM t1 t2 0.1 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 160 140 120 100 80 Rated Vr applied 60 40 0 2 4 6 8 10 12 Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) see note (3) Square wave (D = 0.50) 170 160 150 140 Square wave (D = 0.50) Rated Vr applied DC DC 130 see note (3) 120 0 2 4 6 8 10 12 Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current 20 Average Power Loss ( Watts ) 18 16 14 12 10 8 6 4 2 0 0 Average Forward Current - IF(AV) (A) RMS Limit DC D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 2 4 6 8 10 12 14 Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 50 300 V R = 390V T J = 125˚C T J = 25˚C 250 40 IF = 8 A IF = 16 A 200 Qrr ( nC ) trr ( ns ) IF = 16 A 30 150 IF = 8 A 100 20 V R = 390V T J = 125˚C T J = 25˚C IF = 16 A IF = 16 A 50 IF = 8 A IF = 8 A 10 100 1000 0 100 1000 di F /dt (A/µs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt di F /dt (A/µs ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 3 IF 0 t rr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 14.09 (0.55) 13.47 (0.53) 3 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 2.92 (0.11) 2.54 (0.10) TERM 2 DIA. 6.48 (0.25) 6.23 (0.24) 2° 1 3 1.32 (0.05) 1.22 (0.05) Base Cathode 2 Cathode Anode 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) 6 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) Base Cathode 2 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 N/C 1 3 4.57 (0.18) Anode 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 2 1 3 N/C Anode NC Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 7 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Outline Table 10.6 10.4 HOLE ø 3.4 3.1 2.8 2.6 3.7 3.2 1 3 Cathode Anode 7.1 6.7 16.4 15.4 16.0 15.8 10° 3.1 3.3 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.3 1.05 TYP R0.7 (2 PLACES) R0.5 4.8 4.6 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5°± 0.5° 5°± 0.5° Ordering Information Table Device Code 8 1 E 2 T 3 X 4 06 5 -1 6 1 2 3 4 5 6 - Current Rating (8 = 8A) E T X = Single Diode = TO-220, D2Pak = HyperFast Recovery Voltage Rating (06 = 600V) "-1" = TO-262 Option S = D2Pak None = TO-220AC FP = TO-220 FULLPACK 8 13.5 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/04 www.irf.com 9