AUIRGP50B60PD1

AUTOMOTIVE GRADE PD - 96306A AUIRGP50B60PD1 AUIRGP50B60PD1E WARP2 SERIES IGBT WITH ULTRAFAST SOFT RECOVERY DIODE Applications • Automotive HEV and EV • PFC and ZVS SMPS Circuits G E C VCES = 600V VCE(on) typ. = 2.00V @ VGE = 15V IC = 33A Features • Low VCE(ON) NPT Technology, Positive Temperature Coefficient • Lower Parasitic Capacitances • Minimal Tail Current • HEXFRED Ultra Fast Soft-Recovery Co-Pack Diode • Tighter Distribution of Parameters • Lead-Free, RoHS Compliant • Automotive Qualified * n-channel Equivalent MOSFET Parameters RCE(on) typ. = 61mΩ ID (FET equivalent) = 50A G C E G C E Benefits • Parallel Operation for Higher Current Applications • Lower Conduction Losses and Switching Losses • Higher Switching Frequency up to 150kHz TO-247AC AUIRGP50B60PD1 TO-247AD AUIRGP50B60PD1E Absolute Maximum Ratings G Gate C Collector E Emitter Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified. Parameter Max. Units VCES IC @ TC = 25°C IC @ TC = 100°C ICM ILM IF @ TC = 25°C IF @ TC = 100°C IFRM VGE PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulse Collector Current (Ref. Fig. C.T.4) Clamped Inductive Load Current 600 75 45 h V d 150 150 40 15 60 ±20 390 156 -55 to +150 °C 300 (0.063 in. (1.6mm) from case) 10 lbf·in (1.1 N·m) V W A Diode Continous Forward Current Diode Continous Forward Current Maximum Repetitive Forward Current Gate-to-Emitter Voltage Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature for 10 sec. Mounting Torque, 6-32 or M3 Screw e Thermal Resistance Parameter RθJC (IGBT) RθJC (Diode) RθCS RθJA Thermal Resistance Junction-to-Case-(each IGBT) Thermal Resistance Junction-to-Case-(each Diode) Thermal Resistance, Case-to-Sink (flat, greased surface) Thermal Resistance, Junction-to-Ambient (typical socket mount) Weight *Qualification standards can be found at http://www.irf.com/ Min. ––– ––– ––– ––– ––– Typ. ––– ––– 0.24 ––– 6.0 (0.21) Max. 0.32 1.7 ––– 40 ––– Units °C/W g (oz) www.irf.com 1 11/02/10 AUIRGP50B60PD1/AUIRGP50B60PD1E Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter V(BR)CES ∆V(BR)CES/∆TJ Min. 600 — — — — — — Typ. — 0.31 1.7 2.00 2.45 2.60 3.20 4.0 -10 41 5.0 1.0 1.30 1.20 — Max. Units — — — 2.35 2.85 2.95 3.60 5.0 — — 500 — 1.70 1.60 ±100 nA V V V Ω Conditions VGE = 0V, IC = 500µA 1MHz, Open Collector IC = 33A, VGE = 15V IC = 50A, VGE = 15V IC = 33A, VGE = 15V, TJ = 125°C IC = 50A, VGE = 15V, TJ = 125°C IC = 250µA Ref.Fig Collector-to-Emitter Breakdown Voltage Temperature Coeff. of Breakdown Voltage V/°C VGE = 0V, IC = 1mA (25°C-125°C) 4, 5,6,8,9 RG VCE(on) Internal Gate Resistance Collector-to-Emitter Saturation Voltage VGE(th) ∆VGE(th)/∆TJ Gate Threshold Voltage Threshold Voltage temp. coefficient Forward Transconductance Collector-to-Emitter Leakage Current Diode Forward Voltage Drop Gate-to-Emitter Leakage Current 3.0 — — — — — — — 7,8,9 gfe ICES VFM IGES mV/°C VCE = VGE, IC = 1.0mA S VCE = 50V, IC = 33A, PW = 80µs µA mA V VGE = 0V, VCE = 600V VGE = 0V, VCE = 600V, TJ = 125°C IF = 15A, VGE = 0V IF = 15A, VGE = 0V, TJ = 125°C VGE = ±20V, VCE = 0V 10 Static or Switching Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Qg Qgc Qge Eon Eoff Etotal td(on) tr td(off) tf Eon Eoff Etotal td(on) tr td(off) tf Cies Coes Cres Coes eff. Coes eff. (ER) RBSOA trr Qrr Irr Notes:  RCE(on) typ. = equivalent on-resistance = V CE(on) typ./ IC, where VCE(on) typ.= 2.00V and I C =33A. ID (FET Equivalent) is the equivalent MOSFET ID rating @ 25°C for applications up to 150kHz. These are provided for comparison purposes (only) with equivalent MOSFET solutions. ‚ VCC = 80% (VCES), VGE = 15V, L = 28 µH, RG = 22 Ω. ƒ Pulse width limited by max. junction temperature. „ Energy losses include "tail" and diode reverse recovery, Data generated with use of Diode 30ETH06. … C oes eff. is a fixed capacitance that gives the same charging time as Coes while VCE is rising from 0 to 80% VCES. C oes eff.(ER) is a fixed capacitance that stores the same energy as C oes while VCE is rising from 0 to 80% VCES. † Calculated continuous current based on maximum allowable junction temperature. Package current limit is 60A. Note that current limitations arising from heating of the device leads may occur with some lead mounting arrangements. Min. — — — — — — — — — — — — — — — — — — — Typ. 205 70 30 255 375 630 30 10 130 11 580 480 1060 26 13 146 15 3648 322 56 215 163 Max. Units 308 105 45 305 445 750 40 15 150 15 700 550 1250 35 20 165 20 — — — — — pF VGE = 0V VCC = 30V ns µJ ns µJ nC IC = 33A VCC = 400V VGE = 15V Conditions Ref.Fig 17 CT1 Total Gate Charge (turn-on) Gate-to-Collector Charge (turn-on) Gate-to-Emitter Charge (turn-on) Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On delay time Rise time Turn-Off delay time Fall time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On delay time Rise time Turn-Off delay time Fall time Input Capacitance Output Capacitance Reverse Transfer Capacitance Effective Output Capacitance (Time Related) IC = 33A, VCC = 390V VGE = +15V, RG = 3.3Ω, L = 200µH TJ = 25°C CT3 fÃà IC = 33A, VCC = 390V VGE = +15V, RG = 3.3Ω, L = 200µH TJ = 25°C CT3 fÃà f IC = 33A, VCC = 390V VGE = +15V, RG = 3.3Ω, L = 200µH TJ = 125°C IC = 33A, VCC = 390V VGE = +15V, RG = 3.3Ω, L = 200µH TJ = 125°C CT3 11,13 WF1,WF2 CT3 12,14 WF1,WF2 ÃfÃà 16 Effective Output Capacitance (Energy Related) Reverse Bias Safe Operating Area Diode Reverse Recovery Time Diode Reverse Recovery Charge Peak Reverse Recovery Current g — g — — f = 1Mhz VGE = 0V, VCE = 0V to 480V TJ = 150°C, IC = 150A 15 3 CT2 FULL SQUARE — — — — — — 42 74 80 220 4.0 6.5 60 120 180 600 6.0 10 A nC ns VCC = 480V, Vp =600V Rg = 22Ω , VGE = +15V to 0V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C IF = 15A, VR = 200V, di/dt = 200A/µs IF = 15A, VR = 200V, di/dt = 200A/µs IF = 15A, VR = 200V, di/dt = 200A/µs 19 21 19,20,21,22 CT5 2 www.irf.com AUIRGP50B60PD1/AUIRGP50B60PD1E Qualification Information† Automotive (per AEC-Q101) Qualification Level †† Comments: This part number(s) passed Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. Moisture Sensitivity Level Machine Model Human Body Model Charged Device Model RoHS Compliant TO-247AC TO-247AD N/A Class M4 (+/-450V) AEC-Q101-002 Class H2 (+/-4500V) AEC-Q101-001 Class C5 (+/-1100V) AEC-Q101-005 Yes ESD † Qualification standards can be found at International Rectifier’s web site: http//www.irf.com/ †† Exceptions to AEC-Q101 requirements are noted in the qualification report. www.irf.com 3 AUIRGP50B60PD1/AUIRGP50B60PD1E 90 80 70 60 450 400 350 300 Ptot (W) IC (A) 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 T C (°C) T C (°C) Fig. 1 - Maximum DC Collector Current vs. Case Temperature 1000 Fig. 2 - Power Dissipation vs. Case Temperature 200 180 160 VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V VGE = 6.0V 100 140 ICE (A) 120 100 80 60 40 20 IC A) 10 1 10 100 1000 0 0 1 2 3 4 5 6 7 8 9 10 VCE (V) VCE (V) Fig. 3 - Reverse Bias SOA TJ = 150°C; VGE =15V 200 180 160 140 ICE (A) 200 Fig. 4 - Typ. IGBT Output Characteristics TJ = -40°C; tp = 80µs 180 160 140 ICE (A) 120 100 80 60 40 20 0 0 VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V VGE = 6.0V 120 100 80 60 40 20 0 VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V VGE = 6.0V 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 VCE (V) VCE (V) Fig. 5 - Typ. IGBT Output Characteristics TJ = 25°C; tp = 80µs Fig. 6 - Typ. IGBT Output Characteristics TJ = 125°C; tp = 80µs 4 www.irf.com AUIRGP50B60PD1/AUIRGP50B60PD1E 900 800 700 600 ICE (A) 10 T J = 25°C T J = 125°C 9 8 7 VCE (V) 500 400 300 200 100 0 0 5 10 VGE (V) 15 20 TJ = 125°C T J = 25°C 6 5 4 3 2 1 0 5 10 VGE (V) ICE = 15A ICE = 33A ICE = 50A 15 20 Fig. 7 - Typ. Transfer Characteristics VCE = 50V; tp = 10µs 10 9 8 7 VCE (V) I sa t n o sF r adCr e t -I ( ) n t n e u owr ur n a A F 100 Fig. 8 - Typical VCE vs. VGE TJ = 25°C 6 5 4 3 2 1 0 5 10 VGE (V) ICE = 15A ICE = 33A ICE = 50A 10 TJ = 150°C TJ = 125°C TJ = 25°C 15 20 1 0.8 1.2 1.6 2.0 2.4 F orward Voltage Drop - V FM (V) Fig. 9 - Typical VCE vs. VGE TJ = 125°C 1200 1000 800 Energy (µJ) Fig. 10 - Typ. Diode Forward Characteristics tp = 80µs 1000 Swiching Time (ns) EON 600 EOFF 400 200 0 0 10 20 30 IC (A) 40 50 60 td OFF 100 tF tdON tR 10 0 10 20 30 40 50 60 IC (A) Fig. 11 - Typ. Energy Loss vs. IC TJ = 125°C; L = 200µH; VCE = 390V, RG = 3.3Ω; VGE = 15V. Diode clamp used: 30ETH06 (See C.T.3) Fig. 12 - Typ. Switching Time vs. IC TJ = 125°C; L = 200µH; VCE = 390V, RG = 3.3Ω; VGE = 15V. Diode clamp used: 30ETH06 (See C.T.3) www.irf.com 5 AUIRGP50B60PD1/AUIRGP50B60PD1E 1000 900 800 1000 Energy (µJ) EON 700 600 500 400 300 0 5 10 15 20 25 Swiching Time (ns) tdOFF 100 EOFF td ON tF 10 0 tR 5 10 15 20 25 RG ( Ω) RG ( Ω) Fig. 13 - Typ. Energy Loss vs. RG TJ = 125°C; L = 200µH; VCE = 390V, ICE = 33A; VGE = 15V Diode clamp used: 30ETH06 (See C.T.3) 40 Fig. 14 - Typ. Switching Time vs. RG TJ = 125°C; L = 200µH; VCE = 390V, ICE = 33A; VGE = 15V Diode clamp used: 30ETH06 (See C.T.3) 10000 Cies 30 Capacitance (pF) 1000 Eoes (µJ) 20 Coes 100 10 Cres 0 0 100 200 300 400 500 600 700 VCE (V) 10 0 20 40 60 80 100 VCE (V) Fig. 15- Typ. Output Capacitance Stored Energy vs. VCE 16 14 Normalized V CE(on) (V) Fig. 16- Typ. Capacitance vs. VCE VGE= 0V; f = 1MHz 1.4 12 10 VGE (V) 400V 1.2 8 6 4 2 0 0 50 100 150 200 250 Q G , Total Gate Charge (nC) 1.0 0.8 -50 0 50 100 150 200 T J (°C) Fig. 17 - Typical Gate Charge vs. VGE ICE = 33A Fig. 18 - Normalized Typ. VCE(on) vs. Junction Temperature IC = 33A, VGE= 15V 6 www.irf.com AUIRGP50B60PD1/AUIRGP50B60PD1E 100 100 VR = 200V TJ = 125°C TJ = 25°C 80 VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 30A 60 I IRRM - (A) t rr - (ns) I F = 15A 10 IF = 15A 40 I F = 5.0A I F = 5.0A 20 100 di f /dt - (A/µs) 1000 1 100 di f /dt - (A/µs) 1000 Fig. 19 - Typical Reverse Recovery vs. dif/dt Fig. 20 - Typical Recovery Current vs. dif/dt 800 1000 VR = 200V TJ = 125°C TJ = 25°C 600 VR = 200V TJ = 125°C TJ = 25°C IF = 30A di(rec)M/dt - (A/µs) Q RR - (nC) 400 I F = 5.0A I F = 15A I F = 30A I F = 15A IF = 5.0A 200 0 100 di f /dt - (A/µs) 1000 100 100 di f /dt - (A/µs) 1000 Fig. 21 - Typical Stored Charge vs. dif/dt Fig. 22 - Typical di(rec)M/dt vs. dif/dt, www.irf.com 7 AUIRGP50B60PD1/AUIRGP50B60PD1E 1 Thermal Response ( Z thJC ) D = 0.50 0.1 0.20 0.10 0.05 R1 R1 τJ τ1 τ2 R2 R2 τC τ1 τ2 τ 0.01 0.01 0.02 SINGLE PULSE ( THERMAL RESPONSE ) τJ Ri (°C/W) τi (sec) 0.157 0.000346 0.163 4.28 0.001 Ci= τi/Ri Ci i/Ri Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 0.01 0.1 1 10 0.0001 1E-006 1E-005 0.0001 t1 , Rectangular Pulse Duration (sec) Fig 23. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT) 10 Thermal Response ( Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.01 0.02 τJ R1 R1 τJ τ1 τ2 R2 R2 R3 R3 τ3 τC τ τ3 Ri (°C/W) τi (sec) 0.363 0.000112 0.864 0.473 0.001184 0.032264 τ1 τ2 0.01 Ci= τi /Ri Ci i/Ri SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-006 1E-005 0.0001 0.001 0.01 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 24. Maximum Transient Thermal Impedance, Junction-to-Case (DIODE) 8 www.irf.com AUIRGP50B60PD1/AUIRGP50B60PD1E L L 0 DUT 1K VCC 80 V Rg DUT 480V Fig.C.T.1 - Gate Charge Circuit (turn-off) Fig.C.T.2 - RBSOA Circuit PFC diode L R= VCC ICM DUT / DRIVER Rg VCC Rg DUT VCC Fig.C.T.3 - Switching Loss Circuit Fig.C.T.4 - Resistive Load Circuit REVERSE RECOVERY CIRCUIT VR = 200V 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S Fig. C.T.5 - Reverse Recovery Parameter Test Circuit www.irf.com 9 AUIRGP50B60PD1/AUIRGP50B60PD1E 600 550 500 450 400 350 VCE (V) 300 250 200 150 100 50 0 -50 -100 -0.20 0.00 Eoff 5% V CE tf 90% ICE 60 50 40 30 20 10 0 -10 0.40 450 400 350 300 250 V CE (V) ICE (A) 90% ICE 90 80 70 60 50 40 30 5% V CE 10% ICE tr TEST CURRENT 200 150 100 50 0 -50 -0.10 20 10 5% ICE Eon Loss 0 -10 0.20 0.20 0.00 0.10 Time (µs) Time(µs) Fig. WF1 - Typ. Turn-off Loss Waveform @ TJ = 25°C using Fig. CT.3 Fig. WF2 - Typ. Turn-on Loss Waveform @ TJ = 25°C using Fig. CT.3 3 IF 0 trr ta tb 4 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 di f /dt 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M /dt - Peak rate of change of current during tb portion of trr 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. WF3 - Reverse Recovery Waveform and Definitions 10 www.irf.com ICE (A) AUIRGP50B60PD1/AUIRGP50B60PD1E TO-247AC Package Outline Dimensions are shown in milimeters (inches) TO-247AC Part Marking Information Part Number P50B60PD1 IR Logo YWWA XX or XX Date Code Y= Year WW= Work Week A= Automotive, Lead Free Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ www.irf.com 11 AUIRGP50B60PD1/AUIRGP50B60PD1E TO-247AD Package Outline Dimensions are shown in millimeters (inches) TO-247AD Part Marking Information Part Number 50B60PD1E IR Logo YWWA XX or XX Date Code Y= Year WW= Work Week A= Automotive, Lead Free Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 12 www.irf.com AUIRGP50B60PD1/AUIRGP50B60PD1E Ordering Information Base part number AUIRGP50B60PD1 AUIRGP50B60PD1E Package Type TO-247AC TO-247AD Standard Pack Form Tube Tube Complete Part Number Quantity 25 25 AUIRGP50B60PD1 AUIRGP50B60PD1E www.irf.com 13 AUIRGP50B60PD1/AUIRGP50B60PD1E IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 14 www.irf.com