AUIRS2301S

Sept 8, 2009 Automotive Grade AUIRS2301S HIGH AND LOW SIDE DRIVER Features • • • • • • • • • • • Product Summary 600V Max 5V – 20V 120mA / 250mA 220ns / 200ns 50ns Floating channel designed for bootstrap operation VOFFSET Fully operational to +600V Tolerant to negative transient voltage – dV/dt immune VOUT Gate drive supply range from 5V to 20V Io+ & I o- (min) Undervoltage lockout for both channels 3.3V, 5V and 15V input logic compatible tON & tOFF (typical) Matched propagation delay for both channels Delay Matching Outputs in phase with inputs Lower di/dt gate driver for better noise immunity Leadfree, RoHS compliant Package Options Automotive qualified* Typical Applications o Automotive motor drives o Servo drives o Micro inverter drives o General purpose three phase inverters 8-Lead SOIC AUIRS2301S Typical Connection Diagram www.irf.com © 2009 International Rectifier 1 AUIRS2301S Table of Contents Typical Connection Diagram Description Feature Comparison Qualification Information Absolute Maximum Ratings Recommended Operating Conditions Dynamic Electrical Characteristics Static Electrical Characteristics Functional Block Diagram Input/output Timing Diagram Lead Definitions Lead Assignments Application Information and Additional Details Package Details Tape and Reel Details Part Marking Information Ordering Information Page 1 3 3 4 5 5 6 6 7 8 9 9 10 12 13 14 15 www.irf.com © 2009 International Rectifier 2 AUIRS2301S Description The AUIRS2301S is a high voltage, high speed power MOSFET and IGBT driver with independent high- and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high-side configuration which operates up to 600V. www.irf.com © 2009 International Rectifier 3 AUIRS2301S Qualification Information† Automotive (per AEC-Q100††) Comments: This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL3††† 260°C (per IPC/JEDEC J-STD-020) Class M2 (per AEC-Q100-003) Class H1C (per AEC-Q100-002) Class C5 (per AEC-Q100-011) Class II , Level B (per AEC-Q100-004) Yes Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant † †† ††† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Exceptions to AEC-Q100 requirements are noted in the qualification report. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2009 International Rectifier 4 AUIRS2301S Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VB VS VHO VCC VLO VIN dVS/dt PD RthJA TJ TS TL Definition High-side floating absolute voltage High-side floating supply offset voltage High-side floating output voltage Low-side and logic fixed supply voltage Low-side output voltage Logic input voltage (HIN & LIN) Allowable offset supply voltage transient Package power dissipation @ TA ≤ 25°C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) Min. -0.3 VB - 25 VS - 0.3 -0.3 -0.3 COM -0.3 — — — — -50 — Max. 625 VB + 0.3 VB + 0.3 25 VCC + 0.3 VCC + 0.3 50 0.625 200 150 150 300 °C V Units V/ns W °C/W Recommended Operating Conditions The input/output logic timing diagram is shown in Fig. 1. For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at 15V differential. Symbol Definition Min. VB High-side floating supply absolute voltage VS + 5 VS High-side floating supply offset voltage †1 VHO High-side floating output voltage VS VCC Low-side and logic fixed supply voltage 5 VLO Low-side output voltage 0 VIN Logic input voltage (HIN & LIN) COM TA Ambient temperature -40 †: Logic operational for VS of -5 V to +600 V. Logic state held for VS of -5 V to – VBS. (Please refer to the Design Tip DT97 -3 for more details). Max. VS + 20 600 VB 20 VCC VCC 125 Units V °C www.irf.com © 2009 International Rectifier 5 AUIRS2301S Static Electrical Characteristics VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. The VIL, VIH and IIN parameters are referenced to COM and are applicable to the respective input leads: HIN and LIN. The VO, IO and Ron parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IIN+ IINVCCUV+ VBSUV+ VCCUVVBSUVVCCUVH VBSUVH IO+ IODefinition Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Logic “1” input bias current Logic “0” input bias current VCC and VBS supply undervoltage positive going threshold VCC and VBS supply undervoltage negative going threshold Hysteresis Output high short circuit pulsed current Output low short circuit pulsed current Min 2.5 — — — — 60 60 — — 3.3 3 0.1 — — Typ — — — — — 160 160 5 — 4.1 3.8 0.3 200 350 Max — 0.8 0.2 0.1 50 260 260 20 5 5 4.7 — — mA — VO = 0V, PW ≤ 10µs VO = 15V, PW ≤ 10µs V Units V V Test conditions VCC = 10V to 20V IO = 2mA VB = VS = 600V µA VIN = 0V or 5V VIN = 5V VIN = 0V Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15V, CL = 1000pF, TA = 25°C unless otherwise specified. Symbol ton toff MT tr tf Definition Turn-on propagation delay Turn-off propagation delay Delay matching, HS & LS turn-on/off Turn-on rise time Turn-off fall time Min — — — — — Typ 220 200 0 130 50 Max 300 280 50 220 80 Units Test conditions VS = 0 V VS = 0V or 600V VS = 0V ns www.irf.com © 2009 International Rectifier 6 AUIRS2301S Functional Block Diagram: www.irf.com © 2009 International Rectifier 7 AUIRS2301S Input/Output Pin Equivalent Circuit Diagrams: VB ESD Diode HO ESD Diode 25V VS 600V VCC ESD Diode LO ESD Diode 25V COM/VSS www.irf.com © 2009 International Rectifier 8 AUIRS2301S Lead Definitions: PIN# Symbol 1 2 3 4 5 6 7 8 VCC HIN LIN COM LO VS HO VB Description Low-side and logic fixed supply Logic input for high-side gate driver outputs (HO), in phase with HO Logic input for low-side gate driver outputs (LO), in phase with LO Low-side return Low-side gate drive output High-side floating supply return High-side gate drive output High-side floating supply Lead Assignments www.irf.com © 2009 International Rectifier 9 AUIRS2301S Application Information and Additional Details Figure 1: Input/Output Timing Diagram Figure 2: Switching Time Waveform Definitions Figure 3: Delay Matching Waveform Definitions www.irf.com © 2009 International Rectifier 10 AUIRS2301S Tolerability to Negative VS Transients The AUIRS2301S has been seen to withstand negative VS transient conditions on the order of -25V for a period of 100 ns (VBIAS (VCC, VBS) = 15V and TA = 25°C). An illustration of the AUIRS2301S performance can be seen in Figure 4. Even though the AUIRS2301S has been shown able to handle these negative VS transient conditions, it is highly recommended that the circuit designer always limit the negative VS transients as much as possible by careful PCB layout and component use. 0 100 200 Time (ns) 300 400 500 Figure 4: -Vs Transient results www.irf.com © 2009 International Rectifier 11 AUIRS2301S Package Details www.irf.com © 2009 International Rectifier 12 AUIRS2301S Tape and Reel Details LOADED TAPE FEED DIRECTION B A H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C E B A G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 www.irf.com © 2009 International Rectifier 13 AUIRS2301S Part Marking Information www.irf.com © 2009 International Rectifier 14 AUIRS2301S Ordering Information Standard Pack Base Part Number Package Type Form AUIRS2301 SOIC8 Tube/Bulk Tape and Reel Quantity 95 2500 AUIRS2301S AUIRS2301STR Complete Part Number he information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2009 International Rectifier 15