HFA16TA60CPBF

HFA16TA60CPbF HEXFRED Features • • • • • • TM PD-95739 Ultrafast, Soft Recovery Diode 2 VR = 600V VF(typ.)* = 1.7V Qrr *= 65nC di(rec)M/dt * = 240A/µs 1 3 * 125°C Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count International Rectifier's HFA16TA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 15 amps per Leg continuous current, the HFA16TA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb p ortion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16TA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. Description TO-220AB Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max 600 8.0 60 24 36 14 -55 to +150 Units V A C W www.irf.com 1 10/19/04 HFA16TA60CPbF Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter VBR VFM IRM CT LS Cathode Anode Breakdown Voltage Max Forward Voltage Max Reverse Leakage Current Junction Capacitance Series Inductance Min Typ Max Units 600 1.4 1.7 1.4 0.3 100 10 8.0 1.7 2.1 1.7 5 500 25 V V µA pF nH Test Conditions IR = 100µA IF = 8 A See Fig. 1 IF = 16A IF = 8A, T J = 125°C VR = V R Rated See Fig. 2 TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M /dt1 di(rec)M /dt2 Reverse Recovery Time See Fig. 5, 10 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8 Min Typ Max Units 18 37 55 3.5 4.5 65 124 240 210 55 90 5.0 8 138 360 Test Conditions IF = 1.0A, dif/dt = 200A/µs, V R = 30V ns TJ = 25°C TJ = 125°C IF = 8 A TJ = 25°C A TJ = 125°C VR = 200V TJ = 25°C nC TJ = 125°C dif/dt = 200A/µs TJ = 25°C A/µs TJ = 125°C Thermal - Mechanical Characteristics (per Leg) Parameter Tlead RthJC RthJA‚ RthCSƒ Wt Lead Temperature Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Weight Mounting Torque 6.0 5.0 Min Typ Max 300 3.5 1.75 80 Units °C K/W g (oz) Kg-cm lbf•in 0.5 2.0 0.07 12 10  ‚ ƒ 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA16TA60CPbF 1000 Reverse Current - IR (µA) 100 TJ = 150°C 100 10 1 0.1 0.01 TJ = 125°C Instantaneous Forward Current - IF (A) 10 TJ = 150°C T = 125°C J J TJ = 25°C 0.001 T = 25°C 0 100 200 300 400 500 600 Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) 1 Reverse Voltage - V R(V) 100 A Junction Capacitance -CT (pF) TJ = 25°C 10 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 A Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) 10 1 1 Reverse Voltage RV Reverse Voltage- -VV ( R ) (V) 10 100 1000 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Thermal Response (Z thJC ) D = 0.50 1 0.20 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 0.1 0.01 0.00001 www.irf.com Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg) t1 , Rectangular Pulse Duration (sec) 3 HFA16TA60CPbF 80 20 I F = 16A IF = 8.0A F I F = 4.0A 60 16 VR = 200V TJ = 125°C TJ = 25°C I F = 16A I F = 8.0A trr- (nC) I F = 4.0A Irr- ( A) VR = 200V TJ = 125°C TJ = 25°C 1000 12 40 8 20 4 0 100 di f /dt - (A/µs) 0 100 di f /dt - (A/µs) 1000 Fig. 5 - Typical Reverse Recovery vs. dif/dt, (per Leg) 500 VR = 200V TJ = 125°C TJ = 25°C 400 Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg) 10000 VR = 200V TJ = 125°C TJ = 25°C IF = 16A IF = 4.0A di (rec) M/dt- (A /µs) IF = 8.0A 300 IF = 16A I F = 8.0A IF = 4.0A 1000 Qrr- (nC) 200 100 0 100 di f /dt - (A/µs) 1000 100 100 di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt, (per Leg) Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg) 4 www.irf.com HFA16TA60CPbF 3 IF t rr ta tb 4 REVERSE RECOVERY CIRCUIT VR = 200V 0 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 5 0.01 Ω L = 70µH D.U.T. D G IRFP250 S 1 0.75 I RRM di f /dt 4. Qrr - Area under curve defined by trr and I RRM trr X IRRM Q rr = 2 5. di(rec)M/dt - Peak rate of change of current during t b portion of trr dif/dt ADJUST 1. dif/dt - Rate of change of current through zero crossing 2. I RRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 9 - Reverse Recovery Parameter Test Circuit Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 HFA16TA60CPbF TO-220AB Package Outline Dimensions are shown in millimeters (inches) TO-220AB Part Marking Information PART NUMBER INT ERNAT IONAL RECT IFIER LOGO DAT E CODE ASSEMBLY LOT CODE P = LEAD-FRE E YE AR 1 = 2001 WEEK 19 LINE C E XAMPLE : T HIS IS A HFA16T A60C LOT CODE 1789 ASSE MBLED ON WW 19, 2001 IN T HE ASSEMBLY LINE "C" Note: "P" in the beginning of date code indicates "Lead-F ree" PART NUMBE R INT ERNAT IONAL RECT IFIER LOGO AS SEMBLY LOT CODE DAT E CODE YEAR 1 = 2001 WE EK 19 P = LEAD-FREE EXAMPLE: T HIS IS A HFA16TA60C LOT CODE 1789 ASSEMBLED ON WW 19, 2001 Note: "P" in as sembly line pos ition indicates "Lead-Free" Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 10/04 6 www.irf.com