HFA25PB60PBF

PD - 95684A HFA25PB60PbF HEXFRED • • • • • • TM Ultrafast, Soft Recovery Diode BASE CATHODE Features • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count Benefits Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free 1 CATHODE VR = 600V VF(typ.)* = 1.3V IF(AV) = 25A Qrr (typ.)= 112nC IRRM = 10A 3 ANODE 2 4 2 trr(typ.) = 23ns di(rec)M/dt (typ.) = 250A/µs Description International Rectifier's HFA25PB60 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 25 amps continuous current, the HFA25PB60 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb p ortion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA25PB60 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-247AC (Modified) Absolute Maximum Ratings Parameter VR IF @ TC = 25°C IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max 600 25 225 100 151 60 -55 to +150 Units V A W C * 125°C www.irf.com 1 11/2/04 HFA25PB60PbF Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter VBR VFM IRM CT LS Cathode Anode Breakdown Voltage Max Forward Voltage Max Reverse Leakage Current Junction Capacitance Series Inductance Min Typ Max Units 600 ––– ––– ––– ––– ––– ––– ––– ––– ––– 1.3 1.5 2.0 1.3 1.7 1.5 20 600 2000 55 100 12 ––– V 1.7 V µA pF nH Test Conditions IR = 100µA IF = 25A See Fig. 1 IF = 50A IF = 25A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5 & 10 Peak Recovery Current See Fig. 6 & 10 Reverse Recovery Charge See Fig. 7 & 10 Peak Rate of Fall of Recovery Current See Fig. 8 & 10 During tb Min Typ Max Units ––– ––– ––– ––– ––– ––– ––– ––– ––– 23 ––– 50 75 ns 105 160 4.5 10 A 8.0 15 112 375 nC 420 1200 250 ––– A/µs 160 ––– Test Conditions IF = 1.0A, dif/dt = 200A/µs, V R = 30V TJ = 25°C TJ = 125°C I F = 25A TJ = 25°C TJ = 125°C V R = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead RthJC RthJA‚ RthCSƒ Wt Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Weight Mounting Torque Min –––– –––– –––– –––– –––– –––– 6.0 5.0 Typ –––– –––– –––– 0.25 6.0 0.21 –––– –––– Max 300 0.83 40 –––– –––– –––– 12 10 Units °C K/W g (oz) Kg-cm lbf•in  0.063 in. from Case (1.6mm) for 10 sec ‚ Typical Socket Mount ƒ Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA25PB60PbF 100 10000 Reverse Current - IR (µA) 1000 100 10 1 0.1 0.01 0 T = 150°C J TJ = 125°C Instantaneous Forward Current - IF (A) TJ = 150°C T = 125°C J J TJ = 25°C 100 200 300 400 500 600 T = 25°C 10 Reverse Voltage - V R (V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage 1000 A Junction Capacitance -CT (pF) T = 25°C J 100 1 0.6 1.0 1.4 1.8 2.2 2.6 Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current 10 1 10 100 1000 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 Reverse Voltage - V R (V) Thermal Response (Z thJC ) D = 0.50 0.20 0.1 0.10 0.05 0.02 0.01 PDM t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.001 0.01 0.1 1 0.01 0.00001 0.0001 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics www.irf.com 3 HFA25PB60PbF 140 30 I F = 50A 120 I F = 25A I F = 10A 25 VR = 200V TJ = 125°C TJ = 25°C 100 20 I F = 50A IF = 25A I F = 10A 15 trr- (nC) 60 10 40 Irr- ( A) VR = 200V TJ = 125°C TJ = 25°C 80 20 5 0 100 di f /dt - (A/µs) 1000 0 100 di f /dt - (A/µs) 1000 Fig. 5 - Typical Reverse Recovery vs. dif/dt 1400 VR = 200V TJ = 125°C TJ = 25°C Fig. 6 - Typical Recovery Current vs. dif/dt 10000 VR = 200V TJ = 125°C TJ = 25°C 1200 I F = 50A 1000 di (rec) M/dt- (A /µs) I F = 25A I F = 50A I F = 25A 1000 Qrr- (nC) 800 I F = 10A IF = 10A 600 400 200 0 100 di f /dt - (A/µs) 1000 100 100 di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt Fig. 8 - Typical di(rec)M/dt vs. dif/dt 4 www.irf.com HFA25PB60PbF 3 IF t rr ta tb 4 REVERSE RECOVERY CIRCUIT VR = 200V 0 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 5 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S 1 0.75 I RRM di f /dt 4. Q rr - Area under curve defined by trr and I RRM t rr X IRRM Qrr = 2 5. di (rec)M/dt - Peak rate of change of current during tb portion of t rr 1. dif/dt - Rate of change of current through zero crossing 2. I RRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 9 - Reverse Recovery Parameter Test Circuit Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 HFA25PB60PbF Conforms to JEDEC Outline TO-247AC MODIFIED Dimensions in millimeters and inches Note: Marking "P" indicates Lead-Free IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.11/04 6 www.irf.com