HFB16PA60C

PD - 95682A HFA16PA60CPbF HEXFRED • • • • • • TM Ultrafast, Soft Recovery Diode 2 VR = 600V VF = 1.7V Qrr * = 65nC Features Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count International Rectifier's HFA16PA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA16PA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16PA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. Benefits 1 3 di(rec)M/dt * = 240A/µs * 125°C Description TO-247AC Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current (per Leg) Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max 600 8 60 24 36 14 -55 to +150 Units V A W °C www.irf.com 1 10/18/04 HFA16PA60CPbF Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter VBR VFM IRM CT LS Cathode Anode Breakdown Voltage Max Forward Voltage Max Reverse Leakage Current Junction Capacitance Series Inductance Min. Typ. Max. Units 600 1.4 1.7 1.4 0.3 100 10 8.0 1.7 2.1 1.7 5 500 25 V V µA pF nH Test Conditions IR = 100µA IF = 8A See Fig. 1 IF = 16A IF = 8A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 6 & 16 Peak Recovery Current See Fig. 7& 8 Reverse Recovery Charge See Fig. 9 & 10 Peak Rate of Fall of Recovery Current During tb See Fig. 11 & 12 Min Typ Max Units 18 37 55 3.5 4.5 65 124 240 210 55 90 5.0 8.0 138 360 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 8A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead RthJC RthJA‚ RthCSƒ Wt Lead Temperature Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Weight Mounting Torque 6 5 Min Typ Max 300 3.5 1.75 40 Units °C K/W g (oz) Kg-cm lbf•in 0.25 6 0.21 12 10  0.063 in. from Case (1.6mm) for 10 sec ‚ Typical Socket Mount ƒ Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA16PA60CPbF 100 1000 TJ = 150°C TJ = 125°C Reverse Current - IR (µA) 100 10 1 0.1 0.01 Instantaneous Forward Current - IF (A) 10 TJ = 150°C TJ = 125°C T = 25°C J TJ = 25°C 0.001 0 100 200 300 400 500 600 Reverse Voltage - V R(V) 1 100 A Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) Junction Capacitance -CT (pF) TJ = 25°C 10 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 A Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) 10 1 1 Reverse Voltage VR V Reverse Voltage- - V ( R ) (V) 10 100 1000 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Thermal Response (Z thJC ) D = 0.50 1 0.20 0.10 0.05 0.1 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 0.01 0.00001 Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg) t1 , Rectangular Pulse Duration (sec) www.irf.com 3 HFA16PA60CPbF 80 20 I F = 16A IF = 8.0A F I F = 4.0A 60 VR = 200V TJ = 125°C TJ = 25°C 16 I F = 16A I F = 8.0A I F = 4.0A trr- (nC) 40 Irr- ( A) VR = 200V TJ = 125°C TJ = 25°C 1000 12 8 20 4 0 100 di f /dt - (A/µs) 0 100 di f /dt - (A/µs) 1000 Fig. 5 - Typical Reverse Recovery vs. dif/dt, (per Leg) 500 VR = 200V TJ = 125°C TJ = 25°C 400 Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg) 10000 VR = 200V TJ = 125°C TJ = 25°C I F = 16A IF = 4.0A 300 di (rec) M/dt- (A /µs) IF = 8.0A IF = 16A I F = 8.0A IF = 4.0A 1000 Qrr- (nC) 200 100 0 100 di f /dt - (A/µs) 1000 100 100 di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt, (per Leg) Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg) 4 www.irf.com HFA16PA60CPbF 3 IF t rr ta tb 4 REVERSE RECOVERY CIRCUIT VR = 200V 0 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 5 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S 1 0.75 I RRM di f /dt 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 9 - Reverse Recovery Parameter Test Circuit Fig. 10 - Reverse Recovery Waveform and Definitions Ordering Information Table Device Code HF 1 A 2 16 PA 4 60 5 C 6 3 1 2 3 4 5 6 - Hexfred Family - Process Designator A = subs. elec. Irrad. B = subs. Platinum - Current Rating - Package Outline - Voltage Rating - Configuration (16 = 16A) (PA = TO-247, 3 pins) (60 = 600V) (C = Center Tap Common Cathode) Note: “PbF” suffix at the end of the part number indicates Lead-Free. www.irf.com 5 HFA16PA60CPbF TO-247AC Package Outline TO-247AC Part Marking Information EXAMPLE: THIS IS A HFA16PA60C WITH AS SEMBLY LOT CODE 5657 AS SEMBLED ON WW 35, 2000 IN AS S EMBLY LINE "H" INT ERNAT IONAL RECTIFIER LOGO ASS EMBLY LOT CODE PART NUMBER HFA16PA60C P035H 56 57 Note: "P" in the beginning of date code indicates "Lead-Free" DAT E CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/04 6 www.irf.com