IRAMX20UP60A

PD-96956 Rev B Integrated Power Hybrid IC for Appliance Motor Drive Applications Description IRAMX20UP60A Series 20A, 600V with open Emitter Pins International Rectifier's IRAMX20UP60A is a 20A, 600V Integrated Power Hybrid IC for Appliance Motor Drives applications such air conditioning systems and compressor drivers as well as in light industrial application. IR's technology offers an extremely compact, high performance AC motor-driver in a single isolated package to simplify design. This advanced HIC is a combination of IR's low VCE(on) Punch-Through IGBT technology and the industry benchmark 3 phase high voltage, high speed driver in a fully isolated thermally enhanced package. A built-in temperature monitor and input logic protection function, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. Using a Single in line package (SiP2) with heatspreader for the power die along with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink. • • • • • • • • • • • • Features Integrated Gate Drivers Temperature Monitor Overcurrent shutdown Fully Isolated Package Low VCE (on) Non Punch Through IGBT Technology. Undervoltage lockout for all channels Matched propagation delay for all channels 5V Schmitt-triggered input logic Cross-conduction prevention logic Lower di/dt gate driver for better noise immunity Motor Power range 0.75~1.5kW / 85~253 Vac Isolation 2000VRMS min Absolute Maximum Ratings Parameter VCES / VRRM V+ IO @ TC=25°C IO @ TC=100°C IO FPWM Pd VISO TJ (IGBT & Diodes) TJ (Driver IC) T Description IGBT/Diode Blocking Voltage Positive Bus Input Voltage RMS Phase Current (Note 1) RMS Phase Current (Note 1) Pulsed RMS Phase Current (Note 2) PWM Carrier Frequency Power dissipation per IGBT @ TC =25°C Isolation Voltage (1min) Operating Junction temperature Range Operating Junction temperature Range Mounting torque Range (M3 screw) Max. Value 600 450 20 10 30 20 38 2000 -40 to +150 -40 to +150 0.5 to 0.6 kHz W VRMS °C Nm A Units V Note 1: Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3. Note 2: tP