IRF9540S

PD - 9.917A HEXFET® Power MOSFET l l l l l l l IRF9540S D Surface Mount Available in Tape & Reel Dynamic dv/dt Rating Repetitive Avalanche Rated P Channel 175°C Operating Temperature Fast Switching VDSS = -100V G S RDS(on) = 0.20Ω ID = -19A Description Third Generation HEXFETs from International Rectifier provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The SMD-220 is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible on-resistance in any existing surface mount package. The SMD-220 is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. SMD-220 Absolute Maximum Ratings Parameter I D @ TC = 25°C ID @ TC = 100°C IDM P D @TC = 25°C PD @TC = 25°C Continuous Drain Current, VGS @ -10V Continuous Drain Current, VGS @ -10V Pulsed Drain Current  Power Dissipation Power Dissipation (PCB Mount)** Linear Derating Factor Linear Derating Factor (PCB Mount)** Gate-to-Source Voltage Single Pulse Avalanche Energy ‚ Avalanche Current  Repetitive Avalanche Energy  Peak Diode Recovery dv/dt ƒ Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. -19 -13 -72 150 3.7 1.0 0.025 ±20 640 -19 15 -5.5 -55 to + 175 300 (1.6mm from case) Units A W W/°C V mJ A mJ V/ns °C VGS EAS IAR E AR dv/dt TJ, TSTG Thermal Resistance Parameter RθJC RθJA Junction-to-Case Junction-to-Ambient (PCB Mount)** Min. –––– –––– Typ. –––– –––– Max. 1.0 40 Units °C/W ** When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to application note #AN-994. 3/21/03