IRHMS57163SE

PD - 95840 RADIATION HARDENED POWER MOSFET THRU-HOLE (Low-Ohmic TO-254AA) Product Summary Part Number IRHMS57163SE Radiation Level 100K Rads (Si) IRHMS57163SE JANSR2N7475T1 130V, N-CHANNEL REF: MIL-PRF-19500/685 5 TECHNOLOGY ™ RDS(on) ID QPL Part Number 0.0145Ω 45A* JANSR2N7475T1 Low-Ohmic TO-254AA International Rectifier’s R5 TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) a nd low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. Features: n n n n n n n n n n Low RDS(on) Fast Switching Single Event Effect (SEE) Hardened Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Eyelets Electrically Isolated Light Weight Absolute Maximum Ratings Parameter ID @ VGS = 12V, TC = 25°C ID @ VGS = 12V, TC = 100°C IDM PD @ TC = 25°C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current À Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Á Avalanche Current À Repetitive Avalanche Energy À Peak Diode Recovery dv/dt  Operating Junction Storage Temperature Range Lead Temperature Weight * Current is limited by package For footnotes refer to the last page 45* 45* 180 208 1.67 ±20 432 45 20.8 11.3 -55 to 150 Pre-Irradiation Units A W W/°C V mJ A mJ V/ns o C 300 (0.063 in.(1.6 mm from case for 10s)) 9.3 ( Typical) g www.irf.com 1 09/07/04 IRHMS57163SE, JANSR2N7475T1 Pre-Irradiation Min 130 — — 2.5 36 — — — — — — — — — — — — Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Parameter BVDSS Drain-to-Source Breakdown Voltage ∆ BV DSS / ∆ T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current Typ Max Units — 0.16 — — — — — — — — — — — — — — 6.8 — — 0.0145 4.5 — 10 25 100 -100 160 55 75 35 125 80 50 — V V/°C Ω V S( ) µA Ω Test Conditions VGS = 0V, ID = 1.0mA Reference to 25°C, ID = 1.0mA VGS = 12V, ID = 45A à VDS = VGS, ID = 1.0mA VDS = 15V, IDS = 45A à VDS= 104V ,VGS=0V VDS = 104V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V VGS =12V, ID = 45A VDS = 65V VDD = 65V, ID = 45A VGS =12V, RG = 2.35Ω IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (‘Miller’) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance nA nC ns nH Measured from Drain lead (6mm /0.25in. from package) to Source lead (6mm /0.25in. from package) with Source wires internally bonded from Source Pin to Drain Pad Ciss Coss Crss Rg Input Capacitance Output Capacitance Reverse Transfer Capacitance Internal Gate Resistance — — — — 5510 1490 77 1.8 — — — — pF Ω VGS = 0V, VDS = 25V f = 1.0MHz f = 1.0MHz, open drain Source-Drain Diode Ratings and Characteristics Parameter IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) À Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min Typ Max Units — — — — — — — — — — 45* 180 1.2 300 3.1 Test Conditions A V ns µC Tj = 25°C, IS = 45A, VGS = 0V à Tj = 25°C, IF = 45A, di/dt ≤100A/µs VDD ≤ 25V à Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. * Current is limited by package Thermal Resistance Parameter R thJC RthCS RthJA Junction-to-Case Case-to-Sink Junction-to-Ambient Min Typ Max Units — — — — 0.60 0.21 — — 48 °C/W Test Conditions Typical socket mount Note: Corresponding Spice and Saber models are available on International Rectifier Web site. For footnotes refer to the last page 2 www.irf.com Radiation Characteristics Pre-Irradiation IRHMS57163SE, JANSR2N7475T1 International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ Parameter BVDSS V GS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source „ On-State Resistance (TO-3) Static Drain-to-Source On-state „ Resistance (Low-Ohmic TO-254) Diode Forward Voltage „ Min 130 2.0 — — — — — — 100K Rads (Si) Max — 4.5 100 -100 10 Units V nA µA Ω Ω V Test Conditions ˆ VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20V VDS=104V, VGS=0V VGS = 12V, ID = 45A VGS = 12V, ID = 45A VGS = 0V, ID = 45A 0.0140 0.0145 1.2 International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Single Event Effect Safe Operating Area Ion Br I Au LET MeV/(mg/cm2)) 36.7 59.8 82.3 Energy (MeV) 309 341 350 VDS (V) Range (µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 39.5 130 130 130 130 130 32.5 130 130 130 100 50 28.4 130 120 30 — — 150 120 VDS 90 60 30 0 0 -5 -10 VGS -15 -20 Br I Au Fig a. Single Event Effect, Safe Operating Area For footnotes refer to the last page www.irf.com 3 IRHMS57163SE, JANSR2N7475T1 Pre-Irradiation 1000 ID, Drain-to-Source Current (A) 100 ID, Drain-to-Source Current (A) VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP 1000 VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP 100 5.0V 10 60µs PULSE WIDTH Tj = 150°C 1 0.1 1 10 100 10 5.0V 60µs PULSE WIDTH Tj = 25°C 1 0.1 1 10 100 VDS, Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000 RDS(on) , Drain-to-Source On Resistance 2.5 ID = 45A 2.0 ID, Drain-to-Source Current (A) 100 T J = 150°C T J = 25°C 10 (Normalized) 1.5 1.0 VDS = 50V 15 60µ s PULSE WIDTH 1 5 5.5 6 6.5 7 7.5 8 VGS , Gate-to-Source Voltage (V) 0.5 VGS = 12V 0.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 T J , Junction Temperature (°C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 4 www.irf.com Pre-Irradiation IRHMS57163SE, JANSR2N7475T1 12000 VGS , Gate-to-Source Voltage (V) 10000 VGS = 0V, f = 1 MHz Ciss = Cgs + Cgd, C ds SHORTED Crss = Cgd Coss = Cds + Cgd 20 ID = 45A 16 VDS = 104V VDS = 65V VDS = 26V C, Capacitance (pF) 8000 Ciss 6000 12 Coss 8 4000 2000 Crss 4 FOR TEST CIRCUIT SEE FIGURE 13 0 0 20 40 60 80 100 120 140 160 180 0 1 10 100 VDS, Drain-to-Source Voltage (V) Q G, Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 1000 1000 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 T J = 150°C 10 T J = 25°C ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 100 100µs 10 1 VGS = 0V 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD , Source-to-Drain Voltage (V) 1ms Tc = 25°C Tj = 150°C Single Pulse 1 10 100 10ms 1000 1 VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area www.irf.com 5 IRHMS57163SE, JANSR2N7475T1 Pre-Irradiation 80 LIMITED BY PACKAGE VGS RG VDS RD D.U.T. + I D , Drain Current (A) 60 -VDD VGS 40 Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % Fig 10a. Switching Time Test Circuit 20 VDS 90% 0 25 50 75 100 125 150 TC , Case Temperature ( °C) 10% VGS td(on) tr t d(off) tf Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10b. Switching Time Waveforms 1 D = 0.50 Thermal Response ( Z thJC ) 0.1 0.20 0.10 0.05 0.01 0.02 0.01 SINGLE PULSE ( THERMAL RESPONSE ) P DM t1 t2 0.001 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 1E-006 1E-005 0.0001 0.001 0.01 0.1 1 0.0001 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 6 www.irf.com Pre-Irradiation IRHMS57163SE, JANSR2N7475T1 1000 15V EAS , Single Pulse Avalanche Energy (mJ) 800 ID TOP 20A 28.5A BOTTOM 45A VDS L DRIVER 600 RG D.U.T. IAS tp + - VDD A 400 VGS 20V 0.01Ω 200 Fig 12a. Unclamped Inductive Test Circuit 0 25 50 75 100 125 150 V(BR)DSS tp Starting T J , Junction Temperature (°C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50KΩ QG 12V .2µF .3µF 12 V QGS QGD VGS 3mA D.U.T. + V - DS VG Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit www.irf.com 7 IRHMS57163SE, JANSR2N7475T1 Pre-Irradiation à Pulse width ≤ 300 µs; Duty Cycle ≤ 2% Ä Total Dose Irradiation with VGS Bias. Footnotes: À Repetitive Rating; Pulse width limited by maximum junction temperature. Á VDD = 50V, starting TJ = 25°C, L= 0.43mH Peak IL = 45A, VGS =12V  ISD ≤ 45A, di/dt ≤ 749A/µs, VDD ≤ 130V, TJ ≤ 150°C 12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Å Total Dose Irradiation with VDS Bias. 104 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions — Low-Ohmic TO-254AA 3.78 [.149] 3.53 [.139] A 13.84 [.545] 13.59 [.535] 0.12 [.005] 6.60 [.260] 6.32 [.249] 1.27 [.050] 1.02 [.040] 17.40 [.685] 16.89 [.665] 1 2 3 20.32 [.800] 20.07 [.790] 13.84 [.545] 13.59 [.535] B C 14.48 [.570] 12.95 [.510] 0.84 [.033] MAX. 3X 3.81 [.150] 2X 1.14 [.045] 0.89 [.035] 0.36 [.014] BA 3.81 [.150] NOT ES : 1. 2. 3. 4. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. CONTROLLING DIMENSION: INCH. CONFORMS TO JEDEC OUTLINE TO-254AA. PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE CAUTION BERYLLIA WARNING PER MIL-PRF-19500 Package containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that will produce fumes containing beryllium. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 09/2004 8 www.irf.com