IRHY54Z30CM

PD-93824E RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-257AA) Product Summary Part Number Radiation Level RDS(on) IRHY57Z30CM 100K Rads (Si) 0.03Ω IRHY53Z30CM 300K Rads (Si) 0.03Ω IRHY54Z30CM 500K Rads (Si) IRHF58Z30CM 1000K Rads (Si) 0.03Ω 0.035Ω IRHY57Z30CM JANSR2N7482T3 30V, N-CHANNEL REF: MIL-PRF-19500/702 5 TECHNOLOGY ™ ID QPL Part Number 18A* JANSR2N7482T3 18A* JANSF2N7482T3 18A* JANSG2N7482T3 18A* JANSH2N7482T3 International Rectifier’s R5TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. TO-257AA Features: n n n n n n n n Single Event Effect (SEE) Hardened Ultra Low RDS(on) Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight Absolute Maximum Ratings Parameter ID @ VGS = 12V, TC = 25°C ID @ VGS = 12V, TC = 100°C IDM PD @ TC = 25°C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current À Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Á Avalanche Current À Repetitive Avalanche Energy À Peak Diode Recovery dv/dt  Operating Junction Storage Temperature Range Lead Temperature Weight * Current is limited by package For footnotes refer to the last page 18* 18* 72 75 0.6 ±20 177 18 7.5 1.7 -55 to 150 Pre-Irradiation Units A W W/°C V mJ A mJ V/ns o C 300 (0.063in./1.6mm from case for 10 sec) 4.3 (Typical) g www.irf.com 1 04/25/06 IRHY57Z30CM, JANSR2N7482T3 Pre-Irradiation Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Parameter BVDSS Drain-to-Source Breakdown Voltage ∆BVDSS /∆T J Temperature Coefficient of Breakdown Voltage R DS(on) Static Drain-to-Source On-State Resistance V GS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current Min 30 — — 2.0 16 — — — — — — — — — — — — Typ Max Units — 0.028 — — — — — — — — — — — — — — 6.8 — — 0.03 4.0 — 10 25 100 -100 65 20 10 25 100 35 30 — V V/°C Ω V S( ) µA Ω Test Conditions VGS = 0V, ID = 1.0mA Reference to 25°C, ID = 1.0mA VGS = 12V, ID = 18A VDS = VGS, ID = 1.0mA VDS ≥ 15V, IDS = 18A à VDS= 24V ,VGS=0V VDS = 24V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V VGS =12V, ID = 18A VDS = 15V VDD = 15V, ID = 18A, VGS =12V, RG = 7.5Ω à IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (‘Miller’) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance nA nC ns nH Measured from drain lead (6mm/ 0.25in. from package) to source lead (6mm/0.25in. from package) VGS = 0V, VDS = 25V f = 1.0MHz C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance — — — 2054 936 33 — — — pF Source-Drain Diode Ratings and Characteristics Parameter IS ISM VSD trr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) À Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min Typ Max Units — — — — — — — — — — 18* 72 1.2 102 193 Test Conditions A V ns nC Tj = 25°C, IS = 18A, V GS = 0V à Tj = 25°C, IF = 18A, di/dt ≤ 100A/µs VDD ≤ 25V à Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. * Current is limited by package Thermal Resistance Parameter R thJC R thJA Junction-to-Case Junction-to-Ambient Min Typ Max Units — — — — 1.67 80 °C/W Test Conditions Note: Corresponding Spice and Saber models are available on International Rectifier web site. For footnotes refer to the last page 2 www.irf.com Radiation Characteristics IRHY57Z30CM, JANSR2N7482T3 International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ Parameter BVDSS V GS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source à On-State Resistance (TO-3) Static Drain-to-Source à On-State Resistance (TO-257AA) Diode Forward Voltage à Up to 500K Rads(Si)1 1000K Rads (Si)2 Units Min Max Min Max 30 2.0 — — — — — — — 4.0 100 -100 10 0.025 0.03 1.2 30 1.5 — — — — — — — 4.0 100 -100 25 0.03 0.035 1.2 V nA µA Ω Ω V Test Conditions VGS = 0V, ID = 1.0mA VGS = VDS, I D = 1.0mA V GS = 20V VGS = -20 V VDS=24V, VGS =0V VGS = 12V, ID =18A VGS = 12V, ID =18A VGS = 0V, IS = 18A 1. Part numbers IRHY57Z30CM (JANSR2N7482T3), IRHY53Z30CM (JANSF2N7482T3) and IRHY54Z30CM (JANSG2N7482T3) 2. Part number IRHY58Z30CM (JANSH2N7482T3) International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Single Event Effect Safe Operating Area Ion Cu Br I LET (MeV/(mg/cm2)) 28 37 60 Energy (MeV) 261 285 344 VDS (V) Range (µm) @V GS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 40 30 30 30 25 15 37 30 30 30 23 15 33 25 25 20 15 8 35 30 25 20 15 10 5 0 0 -5 -10 VGS -15 -20 Cu Br I VDS Fig a. Single Event Effect, Safe Operating Area For footnotes refer to the last page www.irf.com 3 IRHY57Z30CM, JANSR2N7482T3 Pre-Irradiation 100 I D , Drain-to-Source Current (A) I D , Drain-to-Source Current (A) VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP 100 VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP 5.0V 10 10 5.0V 1 0.1 20µs PULSE WIDTH TJ = 25 °C 1 10 1 0.1 20µs PULSE WIDTH TJ = 150 ° C 1 10 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 2.0 TJ = 25 ° C TJ = 150 ° C RDS(on) , Drain-to-Source On Resistance (Normalized) 18A ID = 22A I D , Drain-to-Source Current (A) 1.5 10 1.0 0.5 1 5.0 V DS =15 15V 20µs PULSE WIDTH 6.0 7.0 8.0 9.0 0.0 -60 -40 -20 VGS = 12V 0 20 40 60 80 100 120 140 160 VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( °C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 4 www.irf.com Pre-Irradiation IRHY57Z30CM, JANSR2N7482T3 4000 3200 VGS , Gate-to-Source Voltage (V) VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd 20 ID = 18A 22A VDS = 24V VDS = 15V VDS = 6V C, Capacitance (pF) 15 Coss 2400 Ciss 1600 10 5 800 Crss 0 1 10 100 0 0 10 20 30 FOR TEST CIRCUIT SEE FIGURE 13 40 50 60 VDS , Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 1000 ISD , Reverse Drain Current (A) ID, Drain-to-Source Current (A) TJ = 150 ° C TJ = 25 ° C 10 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 100µs 10 1ms Tc = 25°C Tj = 150°C Single Pulse 10ms 1 0.4 V GS = 0 V 0.8 1.2 1.6 1 1 10 VDS , Drain-toSource Voltage (V) 100 VSD ,Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area www.irf.com 5 IRHY57Z30CM, JANSR2N7482T3 Pre-Irradiation 50 LIMITED BY PACKAGE VDS VGS RD 40 ID , Drain Current (A) RG VGS Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % D.U.T. + - VDD 30 20 Fig 10a. Switching Time Test Circuit 10 VDS 90% 0 25 50 75 100 125 150 TC , Case Temperature ( ° C) Fig 9. Maximum Drain Current Vs. Case Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.05 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 0.1 0.02 0.01 0.01 0.00001 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 6 www.irf.com Pre-Irradiation IRHY57Z30CM, JANSR2N7482T3 EAS , Single Pulse Avalanche Energy (mJ) 400 15V ID 8.0A 11.4A BOTTOM 18A TOP 300 VDS L DRIVER RG D.U.T. IAS tp 200 + V - DD A VGS 20V 0.01Ω 100 Fig 12a. Unclamped Inductive Test Circuit 0 25 50 75 100 125 150 V(BR)DSS tp Starting T J, Junction Temperature ( °C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50KΩ QG 12V .2µF .3µF 12 V QGS VG QGD VGS 3mA D.U.T. + V - DS Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit www.irf.com 7 IRHY57Z30CM, JANSR2N7482T3 Pre-Irradiation Footnotes: À Repetitive Rating; Pulse width limited by maximum junction temperature. Á VDD = 15V, starting TJ = 25°C, L= 1.0mH Peak IL = 18A, VGS = 12V  ISD ≤ 18A, di/dt ≤ 54A/µs, VDD ≤ 30V, TJ ≤ 150°C à Pulse width ≤ 300 µs; Duty Cycle ≤ 2% Ä Total Dose Irradiation with VGS Bias. 12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Å Total Dose Irradiation with V DS Bias. 24 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions — TO-257AA 6 %%Ãb#!d #!Ãb# d ÃÃÃÃÃÃÃ"' Ãb $d "YÑ ÃÃÃÃÃÃÃ"$%Ãb #d $'Ãb!d #'"Ãb (d  "Ãb$d  #Ãb#$d '(Ãb"$d "%"Ãb$"&d ""(Ãb$!&d ! " %'(Ãb%%$d %"(Ãb%#$d (!Ãb#"d #!Ãb# d 7 8 $''Ãb%!$d !&Ãb$d & Ãb!'d H6Y !$#Ãb d !Y ÃÃÃÃÃÃÃÃÃÃÃÃ''Ãb"$d "YÑ ÃÃÃÃÃÃÃÃÃÃÃÃ%#Ãb!$d ‘Ã$Ãb!dà 8 6à 7 "$Ãb !d IPU@T) ÃÃ9DH@ITDPIDIBÃÉÃUPG@S6I8DIBÃQ@SÃ6ITDÃ` #$H ((# !ÃÃ8PIUSPGGDIBÃ9DH@ITDPI)ÃDI8C "ÃÃ9DH@ITDPITÃ6S@ÃTCPXIÃDIÃHDGGDH@U@STÃbDI8C@Td #ÃÃPVUGDI@Ã8PIAPSHTÃUPÃE@9@8ÃPVUGDI@ÃUP!$&66 PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 04/2006 8 www.irf.com