IRS2113MPBF

August 8, 2011 IRS2113MPBF HIGH- AND LOW-SIDE DRIVER Features • • • • • • • • • • • • • Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage – dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for both channels 3.3 V input logic compatible Separate logic supply range from 3.3 V to 20 V Logic and power ground ±5 V offset CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Output in phase with inputs Leadfree, RoHS Compliant Product Summary Topology VOFFSET VOUT Io+ & I o- (typical) tON & tOFF (typical) Delay Matching 2 channels 600 V max 10 V – 20 V 2.5 A / 2.5 A 130 ns & 120 ns 20 ns max Package Option Description The IRS2113MPBF is a high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V. MLPQ4x4-16-Lead (without 2 leads) Typical Connection Diagram (Refer to Leads Assignment for correct pin configurations) This diagram shows electrical connections only. Please refer to our Application Notes and Design Tips for proper circuit board layout. www.irf.com © 2008 International Rectifier IRS2113MPBF Qualification Information Qualification Level † Moisture Sensitivity Level Machine Model ESD Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant † †† Industrial (per JEDEC JESD 47) Comments: This IC has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL2 MLPQ4x4 14L (per IPC/JEDEC J-STD020) Class A (+/-200V) (per JEDEC standard JESD22-A115) Class 1B (+/-1000V) (per EIA/JEDEC standard EIA/JESD22-A114) Class III (+/-1000V) (per JEDEC standard JESD22-C101) Class II, Level A (per JESD78A) Yes †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2008 International Rectifier 2 IRS2113MPBF Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Definition Min. Max. Units Symbol VB VS VHO VCC VLO VDD VSS VIN dVS/dt High-side floating supply voltage High-side floating supply offset voltage High-side floating output voltage Low-side fixed supply voltage Low-side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN & SD) Allowable offset supply voltage transient (Fig. 2) -0.3 VB - 20 VS - 0.3 -0.3 -0.3 -0.3 VCC - 20 VSS -0.3 — 625 VB + 0.3 VB + 0.3 25 VCC + 0.3 VSS + 20 (†) VCC + 0.3 VDD + 0.3 50 V PD Package power dissipation @ TA ≤ 25°C — 2.08 RthJA Thermal resistance, junction to ambient — 36 TJ Junction temperature — 150 TS Storage temperature -55 150 TL Lead temperature (soldering, 10 seconds) — 300 † All supplies are fully tested at 25 V, and an internal 20 V clamp exists for each supply. V/ns W °C/W °C Recommended Operating Conditions The input/output logic timing diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15 V differential. Symbol VB VS Definition High-side floating supply absolute voltage High-side floating supply offset voltage Min. VS +10 † Max. VS +20 600 Units VHO High-side floating output voltage VS VB VCC Low-side fixed supply voltage 10 20 VLO Low-side output voltage 0 VCC VDD Logic supply voltage VSS + 3 VSS + 20 VSS Logic ground offset voltage 5 -5 (††) VIN Logic input voltage (HIN, LIN & SD) VSS VDD TA Ambient temperature -40 125 † Logic operational for VS of -4 V to +500 V. Logic state held for VS of -4 V to – VBS. (Please refer to the Design Tip DT97 -3 for more details). †† W hen VDD < 5 V, the minimum VSS offset is limited to –VDD. V °C www.irf.com © 2008 International Rectifier 3 IRS2113MPBF Static Electrical Characteristics VBIAS (VCC, VBS, VDD ) = 15 V, TA = 25°C and VSS = COM unless otherwise specified. The VIL, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO, and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUVIO+ Definition Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Quiescent VDD supply current Logic “1” input bias current Logic “0” input bias current VBS supply undervoltage positive going threshold VBS supply undervoltage negative going threshold VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold Output high short circuit pulsed current Min Typ Max Units 9.5 — — — — — — — — — 7.5 7.0 7.4 7.0 2.0 — — — — — — 6.0 1.4 0.15 50 A Test Conditions V IO = 0 A IO = 20 mA VB = VS = 600 V VIN = 0 V or VDD VIN = VDD VIN = 0 V 125 230 180 340 15 30 20 40 — 5.0 8.6 9.7 8.2 9.4 8.5 9.6 8.2 9.4 2.5 — V A IOOutput low short circuit pulsed current 2.0 2.5 — VO = 0 V, VIN = VDD PW ≤ 10 us VO = 15 V, VIN = 0 V PW ≤ 10 us Dynamic Electrical Characteristics VBIAS (VCC, VBS, VDD ) = 15 V, CL = 1000 pF, TA = 25°C and VSS = COM unless otherwise specified. The dynamic electrical characteristics are measured using the test circuit shown in Fig. 3. Symbol ton toff tsd tr tf MT Definition Turn-on propagation delay Turn-off propagation delay Shutdown propagation delay Turn-on rise time Turn-off fall time Delay matching, HS & LS turn on/off Min Typ Max Units — — — — — — 130 200 120 190 130 160 25 35 17 25 — 20 Test Conditions VS = 0 V VS = 600 V ns www.irf.com © 2008 International Rectifier 4 IRS2113MPBF Functional Block Diagram www.irf.com © 2008 International Rectifier 5 IRS2113MPBF Input/Output Pin Equivalent Circuit Diagrams www.irf.com © 2008 International Rectifier 6 IRS2113MPBF Lead Definitions PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol VDD HIN SD LIN VSS LO COM NC VCC NC NC VS VB HO NC NC Logic supply Logic input for high-side gate driver output (HO), in phase Logic input for shutdown Logic input for low-side gate driver output (LO), in phase Logic ground Low-side gate drive output Low-side return No Connection Low-side supply No Connection (pin removed) No Connection High-side floating supply return High-side floating supply High-side gate drive output No Connection (pin removed) No Connection Description Lead Assignments 16 15 14 13 1 12 VDD VS IRS2113MPBF 2 11 HIN NC SD 3 LIN 4 16L-MLPQ 4x4 with 2 leads removed 5 6 7 8 10 NC 9 VCC = Removed lead IRS2113MPbF www.irf.com © 2008 International Rectifier 7 IRS2113MPBF Application Information and Additional Details Figure 1: Input/Output Timing Diagram Figure 2: Floating Supply Voltage Transient Test Circuit VCC = 15 V 0.1 F1 2 3 4 CL 5 7 VB 15 V VS ( O V to 600V ) 10 F 10 F HIN SD LIN 9 13 12 14 6 0.1 F CL 10 F HO LO Figure 3: Switching Time Test Circuit www.irf.com © 2008 International Rectifier 8 IRS2113MPBF Figure 4: Switching Time Waveform Definitions Figure 5: Shutdown Waveform Definitions Figure 6: Delay Matching Waveform Definitions www.irf.com © 2008 International Rectifier 9 IRS2113MPBF Parameter Temperature Trends www.irf.com © 2008 International Rectifier 10 IRS2113MPBF www.irf.com © 2008 International Rectifier 11 IRS2113MPBF www.irf.com © 2008 International Rectifier 12 IRS2113MPBF www.irf.com © 2008 International Rectifier 13 IRS2113MPBF www.irf.com © 2008 International Rectifier 14 IRS2113MPBF www.irf.com © 2008 International Rectifier 15 IRS2113MPBF www.irf.com © 2008 International Rectifier 16 IRS2113MPBF www.irf.com © 2008 International Rectifier 17 IRS2113MPBF www.irf.com © 2008 International Rectifier 18 IRS2113MPBF Package Details: MLPQ 4x4 -16L www.irf.com © 2008 International Rectifier 19 IRS2113MPBF Tape and Reel Details: MLPQ 4x4 www.irf.com © 2008 International Rectifier 20 IRS2113MPBF Part Marking Information: Ordering Information Standard Pack Base Part Number Package Type Form Tube/Bulk IRS2113 MLPQ 4x4-16L Tape and Reel 3,000 IRS2113MTRPBF Quantity 92 IRS2113MPBF Complete Part Number The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2008 International Rectifier 21 IRS2113MPBF Revision History Date 09/24/09 03/24/2010 08/08/2011 Comment Initial conversion from SO package style data sheet Included qual info page Update the package details www.irf.com © 2008 International Rectifier 22