MBR2080

Bulletin PD-21019 rev. C 01/07 MBRB20...CTPbF MBR20...CT-1PbF SCHOTTKY RECTIFIER 20 Amp IF(AV) = 20Amp VR = 80/ 100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform (Per Device) IFRM VRRM IFSM @ tp = 5 μs sine VF TJ @ 10 Apk, TJ = 125°C range @ TC = 133°C (Per Leg) 20 80/90/100 850 0.70 - 65 to 150 A V A V °C Description/ Features Units A This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap TO-220, D2Pak and TO-262 packages Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 20 Case Styles MBRB20...CTPbF MBR20...CT-1PbF Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 Anode D2PAK www.irf.com TO-262 1 MBRB20...CTPbF, MBR20...CT-1PbF Series Bulletin PD-21019 rev. C 01/07 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) MBRB2080CTPbF MBR2080CT-1PbF MBRB2090CTPbF MBR2090CT-1PbF MBRB20100CTPbF MBR20100CT-1PbF 80 90 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current Values 10 20 20 850 150 Units A A Conditions @ TC = 133° C, (Rated VR) Rated VR, square wave, 20kHz TC = 133° C 5μs Sine or 3μs Following any rated load condition and with rated VRRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz 2.0 μsec 1.0 KHz TJ = 25 °C, IAS = 2 Amps, L = 12 mH A A mJ IRRM Peak Repetitive Reverse Surge Current EAS Non-Repetitive Avalanche Energy (Per Leg) 0.5 24 Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) Values 0.80 0.95 0.70 0.85 Units V V V V mA mA V mΩ Conditions @ 10A @ 20A @ 10A @ 20A TJ = 25 °C TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C Rated DC voltage IRM Max. Instantaneus Reverse Current (1) 0.10 6 0.433 15.8 400 8.0 10000 VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance Typical Series Inductance pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured from top of terminal to mounting plane (1) Pulse Width < 300μs, Duty Cycle