CA-QFE32SA-M-N-T-01

36.83mm sqr. [1.450"] 39.37mm [1.550"] 9.53mm (x4) [0.375"] 2.54mm typ. [0.100"] 2 39.37mm [1.550"] 3.81mm [0.150"] 1 Top View 3.81mm [0.150"] 9.53mm (x4) [0.375"] Bottom View 13.19mm [0.519"] ± 0.010" 5.84mm [0.230"] 1 3 2 Substrate: 2.39mm ±0.18mm [0.094" ±0.007"] FR4/G10 or equivalent high temp material. 17µm [1/2 oz.] Cu clad. SnPb plating. Pins: shell material- Brass Alloy 360 1/2 Hard; shell finish- 10µ" Gold over 100µ" Nickel (min.). contact material- Beryllium Copper Alloy 172, HT; contact finish- 10µ" Gold over 50µ" Nickel (min.) Test points: material- Phosphor Bronze; platingSn over 1.27µm [50µ"] Ni. Gold flash on contact end. Adjustable standoffs: Plastic head thumb screw, black knurled head, 4-40 thread, 1/2" length 3 Side View 4 4 Description: Emulator Adaptor 32 position headers (0.100" centers) to 32 position receptacles. Compatible with Zilog emulator pod,32 pin QFP (OTQ-32.0.8-02) open top socket, and 28 SOIC (OTS-28-1.27-04) open top socket. CA-QFE32SA-M-N-T-01 Drawing © 2005 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: H. Hansen File: CA-QFE32SA-M-NT-01 Dwg Scale: 2:1 Rev: A Date: 8/23/05 Modified: Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.