CA-QFE52SF-L-Z-T-01

Package Compatiblility 1.0mm typ. 0.8mm 17.6mm 45.72mm [1.800"] Target Land Requirements 17.04mm Top View 61.60mm [2.425"] 5 4 27.64mm * [1.347"] 1 2 6.98mm * [0.525"] 3 Substrate: 0.0625"±0.007" FR4/G10 or equivalent high temp material. 1/2 oz. Cu clad. SnPb plating Pins: shell material- Brass Alloy 360 1/2 hard; finish10µ" Au over 50µ" Ni (min.). Contact material- BeCu; finish 10µ" Au over 100µ" Ni (min.) Pins: Material- Brass Alloy 360 1/2 hard; finish- 10µ" Au over 50µ" Ni (min.). Test points: material- Phosphor Bronze; plating- Sn over 50µ" Ni. Gold flash on contact end. Socket Contacts: base: material- Berilium Copper; plating- Au over Ni. 1 Side View 1 * Mated 1.00mm typ. 0.039" 16.79mm 0.661" 2 3 4 5 Description: Carrier Adaptor (CA), QFP 52 position QFP ZIF socket with test points and pluggable intermediate interface to 52 position surface-mount foot (lead-less). Two piece part has 1:1 pin-out. Additional SF-QFE52SF-L-03 surface-mount feet are available separately. All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice. CA-QFE52SF-L-Z-T-01 Drawing © 2000 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Scale: 2:1 Rev: A Drawing: P Jasmin File: CA-QFE52SF-L-Z-T-01 Dwg Date: 1/5/00 Modified: