2SK3536

〈FIELD-EFFECT TRANSISTOR〉 2SK3536 ELECTRET CONDENSER MICROPHONE APPLICATION N CHANNEL JUNCTION TYPE DESCRIPTION 2SK3536 is a super mini package resin sealed silicon N channel junction type FET. Since excellent transient characteristics ,high｜Ｙfs｜ and a super-thin flat lead type package,it is the optimum as an electret condenser microphone use. OUTLINE DRAWING Unit:mm 0.2 0.8 0.2 FEATURE ・Super-thin flat lead type package. t=0.45mm ・High ｜Ｙｆｓ｜ ・Excellent transient characteristics 1 2 3 APPLICATION Electret condenser microphone application TERMINAL CONNECTOR MAXIMUM RATINGS(Ta=25℃) Symbol VDSX VGDO ID IG PT Tch Tstg Parameter Drain to Source Voltage Gate to Drain Voltage Drain Current Gate Current Total allowable dissipation(Ta=25℃) 1 2 3 : DRAIN : SOURCE : GATE JEITA : Ratings 20 -20 10 10 +125 -55∼+125 Unit V V mA mA mW ℃ ℃ Channel temperature Storage temperature ELECTRICAL CHARACTERISTICS(Ta=25℃) Symbol I DSS VGS(OFF) ｜Yfs｜ Ciss NV Parameter Test conditions Min Limits Typ Max Unit 600 -1.0 μA V μS pF μV Drain current VDS=5V, VGS=0V Cut off voltage VDS=5V, ID=1.0μA Forward transfer admittanceVDS=5V, VGS=0V, f=1KHz Input capacitance VDS=5V, VGS=0V, f=1MHz Noise voltage 40 -0.1 350 7.0 1.8 3.0 ISAHAYA  ELECTRONICS  CORPORATIO N 〈FIELD-EFFECT TRANSISTOR〉 2SK3536 ELECTRET CONDENSER MICROPHONE APPLICATION N CHANNEL JUNCTION TYPE COMMON SOURCE OUTPUT 40 0 35 0 30 0 25 0 20 0 15 0 10 0 50 0 0.0 Ta=25℃ 20 0 18 0 16 0 14 0 12 0 10 0 80 60 40 20 5.0 0 0.4 COMMON SOURCE TRANSFER Ta=25℃ VDS=5V VGS=0V VGS=0.1V VGS=0.2V 1.0 2.0 3.0 4.0 0.3 0.2 0.1 0 DRAIN TO SOURCE VOLTAGRE VDS（V） GATE TO SOURCE VOLTAGRE VGS（V） FORWARD TRANSFER ADMITTANCE VS. DRAIN CURRENT 10. 0 1.0 Ta=25℃ VDS=5V VGS=0V CUT OFF VOLTAGE VS. DRAIN CURRENT Ta=25℃ VDS=5V VGS=0V 1.0 0.1 10 10 0 100 0 0.1 10 100 1000 DRAIN CURRENT IDSS（μA） DRAIN CURRENT IDSS（μA） ISAHAYA  ELECTRONICS  CORPORATIO N Marketing division, Marketing planning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan K eep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. N otes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , s uch as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to t e export control laws and regulations of Japan and/or the country of destination is h prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jan.2003