RT3TDDU

RT3TDDU Composite Transistor With Resistor For Switching Application Silicon Epitaxial Type DESCRIPTION RT3TDDU is a composite transistor built with two RT1N237 chip and RT1P237 chip in SC-75A package. OUTLINE DRAWING 1.6 ±0.05 1pin ﾏｰｸ 1.2 ±0.05 Unit：mm FEATURE Silicon epitaxial type Each transistor elements are independent. Mini package for easy mounting 1.6 ±0.05 1. 0 0.5 0.5 (0.5) 6 1 (0.95) 2 (0.5) 5 0.2 ±0.05 APPLICATION Inverted circuit, switching circuit, interface circuit, driver circuit 3 (Φ0.1 ～0.2) 4 0.5 ±0.05 0.12 ±0.05 ※PNP built in transistor of ”－”sign is abbreviation. ⑥ RTr1 ⑤ R1 R2 R2 R1 ④ RTr2 TERMINAL CONNECTOR ①：EMITTER1 ②：BASE1 ③：COLLECTOR2 ④：EMITTER2 ⑤：BASE2 ⑥:COLLECTOR1 JEITA：－ ISAHAYA：USM6F ① ② ③ MAXIMUM RATING (Ta=25℃) SYMBOL VCBO VEBO VCEO VIN IC ICM PC Tj Tstg PARAMETER Collector to Base voltage Emitter to Base voltage Collector to Emitter voltage Input Voltage Collector current Peak Collector current Collector dissipation（Total, Ta=25℃） Junction temperature Storage temperature RATING 50 6 50 12 100 200 125 ＋150 -55～＋150 UNIT V V V V mA mA mW ℃ ℃ １ 2 3 6 5 4 MARKING DD ISAHAYA ELECTRONICS CORPORATION Marketing division, Marketing planning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan K eep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. N otes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , s uch as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to t e export control laws and regulations of Japan and/or the country of destination is h prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jan.2003 RT3TDDU Composite Transistor With Resistor For Switching Application Silicon Epitaxial Type ELECTRICAL CHARACTERISTICS (Ta=25℃) Symbol V(BR)CEO ICBO hFE VCE(sat) VI(ON) VI(OFF) R1 R2/R1 fT Parameter Collector to Emitter break down voltage Collector cut off current DC forward current gain Collector to Emitter saturation voltage Input on voltage Input off voltage Input resistor Resistor ratio Gain band width product Tr1 Tr2 (Tr1,Tr2 common) Limits Min 50 0.1 80 0.1 0.7 0.5 1.5 17 VCE=6V，I E=-10mA VCE=-6V，I E=10mA 0.6 2.2 22 200 150 2.9 26 0.3 1.1 Typ Max Unit V µA V V V KΩ MHZ Test conditions I C=100µA，RBE=∞ VCB=50V，I E =0 VCE=5V，I C=10mA I C=10mA，I B=0.5mA VCE=0.2V，I C=5mA VCE=5V，I C=100µA TYPICAL CHARACTERISTICS IN P U T ON V OL TA GE V S. C OL L E C TOR C U R R E N T (Tr1) D C F OR W A R D C U R R E N T GA IN V S. C OL L E C TOR C U R R E N T VCE=0.2V DC FORWARD CURRENT GAIN　ｈＦＥ 10 INPUT ON VOLTEGE　ＶI(ON) 1000 VCE=5V 1 100 0.1 1 10 COLLECTOR CURRENT　Ｉ Ｃ（ｍＡ） C OL L E C TOR C U R R E N T V S. IN P U T OF F V OL TA GE 10 1 10 COLLECTOR CURRENT　ＩＣ（ｍＡ） 100 100 COLLECTOR CURRENT　Ｉ Ｃ（μＡ） 1000 VCE=5V 100 10 0 0.4 0.8 1.2 1.6 INPUT OFF VOLTAGE　ＶＩ（ＯＦＦ） （Ｖ） 2 ISAHAYA ELECTRONICS CORPORATION RT3TDDU Composite Transistor With Resistor For Switching Application Silicon Epitaxial Type TYPICAL CHARACTERISTICS IN P U T ON V OL TA GE V S. C OL L E C TOR C U R R E N T (Tr2) D C F OR W A R D C U R R E N T GA IN V S. C OL L E C TOR C U R R E N T INPUT ON VOLTEGE　ＶI(ON)（Ｖ） -10 VCE=-0.2V DC FORWARD CURRENT GAIN　ｈＦＥ 1000 VCE=-5V -1 100 -0.1 -1 -10 -100 COLLECTOR CURRENT　Ｉ Ｃ（ｍＡ） C OL L EC TOR C U R R E N T V S. IN P U T OF F V OL TA G E 10 -1 -10 -100 COLLECTOR CURRENT　ＩＣ（ｍＡ） -1000 COLLECTOR CURRENT　Ｉ Ｃ（μＡ） VCE=-5V -100 -10 0 -0.4 -0.8 -1.2 -1.6 INPUT OFF VOLTAGE　ＶＩ（ＯＦＦ） （Ｖ） -2 ISAHAYA ELECTRONICS CORPORATION Marketing division, Marketing planning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan K eep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. N otes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , s uch as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to t e export control laws and regulations of Japan and/or the country of destination is h prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jan.2003