RTGN432P

〈SMALL-SIGNAL TRANSISTOR〉 RTGN432P TRANSISTOR WITH RESISTOR FOR SWITHING APPLICATION SILICON NPN EPITAXIAL TYPE DISCRIPTION RTGN432P is a one chip transistor with built-in bias transistor. FEATURE ● Built-in bias resistor （R1=4.7kΩ,R2=10kΩ） ● High collector current IC=1A ● Built-in zener diode between collector and base APPLICATION Motor driver circuit OUTLINE DRAWING 4.6 MAX 1.6 1.5 Unit：mm E 0.8 MIN C B 0.53 MAX 2.5 4.2 MAX 0.4 0.48 MAX 1.5 3.0 MARKING TERMINAL CONNECTOR Ｅ: EMITTER Ｃ: COLLECTOR Ｂ: BASE JEDEC : EQUIVALENT CIRCUIT C MARKING A part of EIAJ standard B R1 R2 E The last number of fisical year NE Marking month Running No. MAXIMUM RATING（Ta=25℃） SYMBOL VCBO VEBO VCEO IC ICM PC Tj Tstg PARAMETER Collector to Base voltage Emitter to Base voltage Collector to Emitter voltage Collector current (DC) Collector current (pulse) Collector dissipation Junction temperature Storage temperature RATING 60±10 10 60±10 1 2 500 ＋150 -55～＋150 UNIT V V V A A mW ℃ ℃ ISAHAYA ELECTRONICS CORPORATION 〈SMALL-SIGNAL TRANSISTOR〉 RTGN432P TRANSISTOR WITH RESISTOR FOR SWITHING APPLICATION SILICON NPN EPITAXIAL TYPE ELECTRICAL CHARACTERISTICS（Ta=25℃） Symbol ICBO VOL VIL hFE1 hFE2 hFE3 R1 R2 Parameter Collector cut off current Output voltage Input voltage (OFF) DC forward current gain DC forward current gain DC forward current gain Input resistor Emitter – Base resistor VCB=40V，IE=0 VI=5V，IC=200mA VCE=5V，IC=100μA VCE=2V，IC=0.1A VCE=2V，IC=0.5A VCE=2V，IC=1A ― ― Test conditions Limits Min ― ― 0.3 200 300 200 3.29 7 Typ ― ― ― ― ― ― 4.70 10 Max 0.1 0.2 ― ― ― ― 6.11 13 Unit uA V V ― ― ― KΩ KΩ ISAHAYA ELECTRONICS CORPORATION Marketing division, Marketing planning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan K eep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. N otes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , s uch as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to t e export control laws and regulations of Japan and/or the country of destination is h prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jan.2003