2SD2589

isc Silicon NPN Darlington Power Transistor 2SD2589 DESCRIPTION ·Collector-Emitter Breakdown Voltage: V(BR)CEO= 110V(Min) ·High DC Current Gain: hFE= 5000( Min.) @(IC= 5A, VCE= 4V) ·Low Collector Saturation Voltage: VCE(sat)= 2.5V(Max)@ (IC= 10A, IB= 5mA) ·Complement to Type 2SB1649 ·Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS ·Designed for series regulator and general purpose applications. ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER VALUE UNIT VCBO Collector-Base Voltage 110 V VCEO Collector-Emitter Voltage 110 V VEBO Emitter-Base Voltage 5 V IC Collector Current-Continuous 6 A IB Base Current-Continuous 1 A PC Collector Power Dissipation @TC=25℃ 50 W TJ Junction Temperature 150 ℃ Tstg Storage Temperature -55~150 ℃ isc website：www.iscsemi.com 1 isc & iscsemi is registered trademark isc Silicon NPN Darlington Power Transistor 2SD2589 ELECTRICAL CHARACTERISTICS Tj=25℃ unless otherwise specified  SYMBOL PARAMETER CONDITIONS MIN TYP. MAX V(BR)CEO Collector-Emitter Breakdown Voltage IC= 30mA, IB= 0 VCE(sat) Collector-Emitter Saturation Voltage IC= 10A ,IB= 5mA 2.5 V VBE(sat) Base-Emitter Saturation Voltage IC= 10A ,IB= 5mA 3.0 V ICBO Collector Cutoff current VCB= 110V, IE= 0 0.1 mA IEBO Emitter Cutoff current VEB= 5V, IC= 0 0.1 mA hFE DC Current Gain IC= 5A; VCE= 4V 110 UNIT V 5000 hFE Classifications O P Y 5000-12000 6500-20000 15000-30000 NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc website：www.iscsemi.com 2 isc & iscsemi is registered trademark