BD680

isc Silicon PNP Darlington Power Transistor BD680 DESCRIPTION ·Collector–Emitter Breakdown Voltage— : V(BR)CEO = -80V ·DC Current Gain— : hFE = 750(Min) @ IC= -1.5 A ·Complement to Type BD679 ·Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS ·Designed for use as output devices in complementary general-purpose amplifier applications. ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER VALUE UNIT VCBO Collector-Base Voltage -80 V VCEO Collector-Emitter Voltage -80 V VEBO Emitter-Base Voltage -5 V IC Collector Current-Continuous -4 A IB Base Current -0.1 A PC Collector Power Dissipation TC=25℃ 40 W Ti Junction Temperature 150 ℃ -55~150 ℃ Tstg Storage Temperature Range THERMAL CHARACTERISTICS SYMBOL PARAMETER MAX UNIT Rth j-c Thermal Resistance, Junction to Case 3.13 ℃/W isc website：www.iscsemi.com 1 isc & iscsemi is registered trademark isc Silicon PNP Darlington Power Transistor BD680 ELECTRICAL CHARACTERISTICS TC=25℃ unless otherwise specified SYMBOL PARAMETER CONDITIONS MIN MAX V(BR)CEO Collector-Emitter Breakdown Voltage IC= -50mA; IB= 0 VCE(sat) Collector-Emitter Saturation Voltage IC= -1.5A; IB= -30mA -2.5 V VBE(on) Base-Emitter On Voltage IC= -1.5A; VCE= -3V -2.5 V ICEO Collector Cutoff Current VCE= -80V; IB= 0 -0.5 mA ICBO Collector Cutoff Current VCB= -80V; IE= 0 VCB= -80V; IE= 0;TC= 100℃ -0.2 -2.0 mA IEBO Emitter Cutoff Current VEB= -5V; IC= 0 -2.0 mA hFE DC Current Gain IC= -1.5 A ; VCE= -3V -80 UNIT V 750 NOTICE： ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc website：www.iscsemi.com 2 isc & iscsemi is registered trademark