BTA16-800BW

isc Triacs BTA16-800BW FEATURES ·With TO-220 insulated package ·Suitables for general purpose AC switching. Which can be used as an ON/OFF function in applications such as static relays, heating regulation,induction motor starting circuits. Or for phase control operation in light dimmers, motor speed controllers etc. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 800 V VRRM Repetitive peak off-state voltage 800 V IT(RMS) RMS on-state current (full sine wave)Tj=80℃ 16 A Non-repetitive peak on-state current 160 A 125 ℃ -40~150 ℃ ITSM Tj Tstg tp=20ms Operating junction temperature Storage temperature Rth(j-c) Thermal resistance, junction to case 2.9 ℃/W Rth(j-a) Thermal resistance, junction to ambient 60 ℃/W ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified) SYMBOL PARAMETER CONDITIONS IRRM Repetitive peak reverse current IDRM Repetitive peak off-state current VR=VRRM,Tj=25℃ VR=VRRM, Tj=125℃ VD=VDRM,Tj=25℃ VD=VDRM, Tj=125℃ Gate trigger current Ⅱ VD=12V; RL= 33Ω 0.01 2 mA 0.01 2 mA 50 mA 50 Ⅲ IH UNIT 50 Ⅰ IGT MAX Holding current IGT= 0.5A, Gate Open 50 mA VGT Gate trigger voltage all quadrant VD=12V; RL= 33Ω 1.3 V VTM On-state voltage IT= 22.5A; tp= 380μs 1.6 V isc website：www.iscsemi.com isc & iscsemi is registered trademark isc Triacs BTA16-800BW NOTICE： ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc website：www.iscsemi.com isc & iscsemi is registered trademark