MJE15033

isc Silicon PNP Power Transistor MJE15033 DESCRIPTION ·Collector-Emitter Sustaining Voltage: VCEO(SUS)= -250V(Min) ·DC current gain : hFE = 50 (Min) @IC= -0.5 A : hFE = 10 (Min) @IC= -2.0 A ·Complement to Type MJE15032 ·Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS ·Designed for use as high–frequency drivers in audio amplifiers. ABSOLUTE MAXIMUM RATINGS (Ta=25℃) SYMBOL PARAMETER VALUE UNIT VCBO Collector-Base Voltage -250 V VCEO Collector-Emitter Voltage -250 V VEBO Emitter-Base Voltage -5 V IC Collector Current -Continuous -8 A ICM Collector Current-Peak -16 A IB Base Current -2 A PC Collector Power Dissipation @Ta=25℃ Collector Power Dissipation @TC=25℃ Tj Junction Temperature 150 ℃ Tstg Storage Temperature -65~150 ℃ 2 50 W THERMAL CHARACTERISTICS SYMBOL PARAMETER MAX UNIT Rth j-c Thermal Resistance,Junction to Case 2.5 ℃/W Rth j-a Thermal Resistance,Junction to Ambient 62.5 ℃/W isc Website：www.iscsemi.com 1 isc & iscsemi is registered trademark isc Silicon PNP Power Transistor MJE15033 ELECTRICAL CHARACTERISTICS Tj=25℃ unless otherwise specified SYMBOL PARAMETER VCEO(SUS) Collector-Emitter Sustaining Voltage IC= -10mA ;IB= 0 VCE(sat) Collector-Emitter Saturation Voltage IC= -1A ;IB= -0.1A -0.5 V VBE(on) Base-Emitter On Voltage IC= -1A ; VCE= -5V -1.0 V ICBO Collector Cutoff Current VCB= -150V; IE= 0 -10 μA IEBO Emitter Cutoff Current VEB= -5V; IC= 0 -10 μA hFE-1 DC Current Gain IC= -0.5A ; VCE= -5V 50 hFE-2 DC Current Gain IC= -1A ; VCE= -5V 50 hFE-3 DC Current Gain IC= -2A ; VCE= -5V 10 Current Gain-Bandwidth Product IC= -0.5A; VCE= -10V; ftest= 1.0MHz 20 fT CONDITIONS MIN MAX -250 UNIT V MHz NOTICE： ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc Website：www.iscsemi.com 2 isc & iscsemi is registered trademark