TIP42B

isc Silicon PNP Power Transistors TIP42/42A/42B/42C DESCRIPTION ·DC Current Gain -hFE = 30(Min)@ IC= -0.3A ·Collector-Emitter Sustaining Voltage: VCEO(SUS) = -40V(Min)- TIP42; -60V(Min)- TIP42A -80V(Min)- TIP42B; -100V(Min)- TIP42C ·Complement to Type TIP41/41A/41B/41C ·Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS ·Designed for use in general purpose amplifer and switching applications ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL VCBO VCEO VEBO PARAMETER Collector-Base Voltage Collector-Emitter Voltage VALUE TIP42 -40 TIP42A -60 TIP42B -80 TIP42C -100 TIP42 -40 TIP42A -60 TIP42B -80 TIP42C -100 UNIT V V Emitter-Base Voltage -5 V Collector Current-Continuous -6 A Collector Current-Peak -10 A IB Base Current -2 A PC Collector Power Dissipation TC=25℃ Collector Power Dissipation Ta=25℃ Tj Junction Temperature IC ICM Tstg Storage Temperature Range isc website： www.iscsemi.com 65 W 2 150 ℃ -65~150 ℃ 1 isc & iscsemi is registered trademark isc Silicon PNP Power Transistors TIP42/42A/42B/42C ELECTRICAL CHARACTERISTICS TC=25℃ unless otherwise specified SYMBOL PARAMETER CONDITIONS TIP42 VCEO(SUS) * Collector-Emitter Sustaining Voltage MIN MAX UNIT -40 TIP42A -60 IC= -30mA; IB= 0 V TIP42B -80 TIP42C -100 VCE(sat) * Collector-Emitter Saturation Voltage IC= -6A ;IB= -0.6A -1.5 V VBE(on) * Base-Emitter On Voltage IC= -6A ; VCE= -4V -2.0 V -0.4 mA -0.7 mA -1.0 mA ICBO ICEO TIP42 VCB= -40V; VEB= 0 TIP42A VCB= -60V; VEB= 0 TIP42B VCB= -80V; VEB= 0 TIP42C VCB= -100V; VEB= 0 TIP42/42A VCE= -30V; IB= 0 Collector Cutoff Current Collector Cutoff Current TIP42B/42C IEBO VCE= -60V; IB= 0 Emitter Cutoff Current VEB= -5V; IC= 0 hFE-1* DC Current Gain IC= -0.3A ; VCE= -4V 30 hFE-2* DC Current Gain IC= -3A ; VCE= -4V 15 Current-Gain—Bandwidth Product IC= -0.5A ;VCE= -10V 3 fT 75 MHz * Pulse Test: PW≤300μs, Duty Cycle≤2% NOTICE： ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. isc website： www.iscsemi.com 2 isc & iscsemi is registered trademark ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc website： www.iscsemi.com 3 isc & iscsemi is registered trademark