H11AA1XSM

H11AA1, H11AA2, H11AA3, H11AA4 H11AA1X, H11AA2X, H11AA3X, H11AA4X A.C. INPUT PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS APPROVALS z UL recognised, File No. E91231 'X' SPECIFICATIONAPPROVALS z VDE 0884 in 3 available lead form : - STD - G form - SMD approved to CECC 00802 DESCRIPTION The H11AA series of optically coupled isolators consist of two infrared light emitting diodes connected in inverse parallel and NPN silicon photo transistor in a standard 6 pin dual in line plastic package. Dimensions in mm 2.54 7.0 6.0 1 2 6 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 13° Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25°C unless otherwise specified) FEATURES Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. z High Isolation Voltage (5.3kVRMS ,7.5kVPK ) z AC or polarity insensitive input z All electrical parameters 100% tested z Custom electrical selections available Storage Temperature -55°C to + 125°C Operating Temperature -30°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C APPLICATIONS z Computer terminals z Industrial systems controllers z Telephone sets, Telephone exchangers z Signal transmission between systems of different potentials and impedances OUTPUT TRANSISTOR z 10.46 9.86 Forward Current Power Dissipation Collector-emitter Voltage BVCEO Collector-base Voltage BVCBO Emitter-collector Voltage BVECO Emitter-base Voltage BVEBO Collector Current Power Dissipation ±50mA 70mW 35V 35V 6V 6V 50mA 150mW OPTION G OPTION SM SURFACE MOUNT 0.6 0.1 INPUT DIODE 7.62 POWER DISSIPATION Total Power Dissipation 200mW (derate linearly 4.67mW/°C above 25°C) 1.25 0.75 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1UD England Tel: (01429)863609 Fax : (01429) 863581 e-mail sales@isocom.co.uk http://www.isocom.com 26/11/08 DB92296 ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Output Collector-emitter Breakdown (BVCEO) ( note 2 ) Collector-base Breakdown (BVCBO) Emitter-base Breakdown (BVEBO) Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) Coupled MIN TYP MAX UNITS 1.2 V IF = ±10mA 35 V IC = 0.1mA 35 6 6 V V V nA IC = 100μA IE = 100μA IE = 10μA VCE = 20V % % % % ±10mAIF , 10V VCE ±10mAIF , 10V VCE ±10mAIF , 10V VCE ±10mAIF , 10V VCE V ±10mAIF , 0.5mAIC VRMS VPK See note 1 See note 1 Ω VIO = 500V (note 1) μS μS VCE = 2V, IC = 2mA RL = 100Ω 100 Current Transfer Ratio (CTR) (note 2 ) H11AA4 100 H11AA3 50 H11AA1 20 H11AA2 10 Collector-emitter Saturation VoltageVCE(SAT) 26/11/08 0.4 Input to Output Isolation Voltage VISO 5300 7500 Input-output Isolation Resistance RISO 5x1010 Rise Time, tr Fall Time, tf Note 1 Note 2 1.5 TEST CONDITION 4 3 Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. DB92296 Collector Power Dissipation vs. Ambient Temperature Forward Current vs. Forward Voltage 100 80 Forward current IF (±mA) Collector power dissipation PC (mW) 400 300 200 100 60 40 20 0 -20 -40 -60 -80 -100 0 -30 0 25 50 75 100 -2.0 125 Forward Current vs. Ambient Temperature Normalised output current ( IC ) Forward current IF (±mA) 1.0 2.0 Normalised Output Current vs. Ambient Temperature 120 100 80 60 40 20 2.4 2.2 2.0 1.8 Normalised to VCE = 10V , IF = ±10mA , RBE = 1MΩ , TA = 25°C IF = ±20mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 IF = ±10mA IF = ±5mA 0 -30 0 25 50 75 100 125 Ambient temperature TA ( °C ) 0 25 50 75 Ambient temperature TA ( °C ) Normalised Output Current vs. Collector-emitter Voltage Normalised Output Current vs. Forward Current 10 IF = -10mA 1 IF = +10mA 10-1 Normalised to VCE = 10V , IF = +10mA , TA = 25°C 10-2 -30 Normalised output current ( IC ) Normalised output current ( IC ) 0 Forward voltage VF ( V ) Ambient temperature TA ( °C ) 100 5 1 0.5 0.1 0.05 0.01 0.005 Normalised to VCE = 10V , IF = ±10mA , TA = 25°C 0.001 0.0005 0.0001 10-3 0.1 0.2 0.5 1 2 5 10 20 Collector-emitter voltage VCE ( V ) 26/11/08 -1.0 50 0.1 0.2 0.5 1 2 5 10 20 Forward current IF (±mA) DB92296 50 100