H11L1SM

ISOCOM COMPONENTS H11L1, H11L1V DESCRIPTION The H11L1 (UL Approval) and H11L1V (UL and VDE Approvals) devices each consist of a GaAs infrared emitting diode optically coupled to a high speed output integrated Microprocessor Compatible Schmitt trigger detector, which provides hysteresis for noise immunity and pulse shaping. 1 Anode 2 Cathode 3 NC FEATURES • • • • • • • • • • • • High Data Rate, 1MHz typical (NRZ) Free from Latch Up and Oscillation Microprocessor Compatible Drive Logical Compatible Output sinks 16mA at 0.4V maximum Guaranteed On/Off Threshold Hysteresis Wide Supply Voltage Capability, compatible with all popular Logic Systems Operating Voltage Range VCC 3V to 16V Operating Temperature Range - 55°C to +100°C High AC Isolation voltage 5000VRMS Lead Free and RoHS Compliant UL Approval Certificate E91231 VDE Approval Certificate 40044376 APPLICATIONS • • • • • • Logic to Logic isolator Line Receiver - eliminate noise and transient problems Programmable Current Level Sensor AC to TTL Conversion - Square Wave Shaping Power Supply Digital Programming Computer Peripherals Interface ORDER INFORMATION • • • Add G after PN for 10mm lead spacing Add SM after PN for Surface Mount Add SMT&R after PN for Surface Mount Tape & Reel ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1PE, United Kingdom Tel : +44 (0)1429 863 609 Fax : +44 (0)1429 863 581 e-mail : sales@isocom.co.uk http://www.isocom.com 1 11/08/2017 4 VO 5 GND 6 VCC ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability. Input Forward Current Reverse Voltage Power Dissipation 60mA 6V 120mW Output Output Current Output Voltage Supply Voltage Power Dissipation 50mA 16V 16V 150mW Total Package Isolation Voltage Total Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature (10s) 5000VRMS 250mW -55 to 100 °C -55 to 150 °C 260°C ISOCOM COMPONENTS ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel : +852 2995 9217 Fax : +852 8161 6292 e-mail : sales@isocom.com.hk DD93224 ISOCOM COMPONENTS H11L1, H11L1V Truth Table LED VO ON LOW OFF HIGH ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified. Typical Values at TA = 25°C) INPUT Parameter Symbol Test Condition Forward Voltage VF IF = 10mA Reverse Current IR VR = 5V Terminal Capacitance CIN V = 0V, f = 1MHz Symbol Test Condition Min Typ. Max Unit 1.15 1.5 V 10 µA 33 pF OUTPUT Parameter Operating Voltage Typ. 3 VCC Supply Current ICC(off) VCC = 5V, IF = 0mA High Level Output Current IOH IF = 0mA, VCC = VO = 15V 2 11/08/2017 Min 1.6 Max Unit 15 V 5 mA 100 µA DD93224 ISOCOM COMPONENTS H11L1, H11L1V ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified, Typical Values at TA = 25°C) COUPLED Parameter Symbol Test Condition Supply Current ICC(on) VCC = 5V, IF = 10mA Low Level Output Voltage VOL Turn-On Threshold Current Turn-Off Threshold Current Typ. Max Unit 1.6 5 mA VCC = 5V, IF = IF(on) (max), RL = 270Ω 0.4 V IF(on) VCC = 5V, RL = 270Ω 1.6 mA IF(off) VCC = 5V, RL = 270Ω Hysteresis Rtio IF(off)/IF(on) VCC = 5V, RL = 270Ω Turn-On Time t(on) VCC = 5V, IF = IF(on) (max), RL = 270Ω Fall Time Turn-Off Time Rise Time tf Min 1 0.5 mA 0.9 4 µs 0.1 4 t(off) 0.1 tr ISOLATION Parameter Symbol Test Condition Min Typ. Max Unit Isolation Voltage VISO R.H. = 40% to 60%, t = 1 min, Note 1 5000 VRMS Input - Output Resistance RI-O VI-O = 500VDC R.H. = 40% to 60% 1011 Ω Note 1 : Measured with input leads shorted together and output leads shorted together. 3 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V Fig 1 Forward Current vs Forward Voltage Fig 2 Transfer Characteristics Fig 3 Normalized Turn-On Current vs Supply Voltage Fig 4 Normalized Turn-On Current vs Ambient temperature Fig 5 Low Level Output Voltage vs Load Current Fig 6 Supply Current vs Supply Voltage 4 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V Vo Monitor VIN tr = tf = 0.01µs Z = 50Ω 0.1µF Switching Time Test Circuit and Waveform 5 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V ORDER INFORMATION H11L1 (UL Approval) PN After PN Description Packing quantity None H11L1 Standard DIP6 65 pcs per tube G H11L1G 10mm Lead Spacing 65 pcs per tube SM H11L1SM Surface Mount 65 pcs per tube SMT&R H11L1SMT&R Surface Mount Tape & Reel 1000 pcs per reel H11L1V (UL Approval and VDE Approvals) PN After PN Description Packing quantity None H11L1V Standard DIP6 65 pcs per tube G H11L1VG 10mm Lead Spacing 65 pcs per tube SM H11L1VSM Surface Mount 65 pcs per tube SMT&R H11L1VSMT&R Surface Mount Tape & Reel 1000 pcs per reel 6 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V DEVICE MARKING H11L1 IYWW H11L1 denotes Device Part Number (H11L1 as example) I denotes Isocom Y denotes 1 digit Year code WW denotes 2 digit Week code 7 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V PACKAGE DIMENSIONS in mm (inch) DIP G Form SMD 8 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V RECOMMENDED PAD LAYPUT FOR SMD (mm) TAPE AND REEL PACKAGING Direction of feed from reel Dimension No. A B Do D1 E F Dimension( mm) 10.4±0.1 7.5±0.1 1.5±0.1 1.5+0.1/-0 1.75±0.1 7.5±0.1 Dimension No. Po P1 P2 t W K Dimension (mm) 4.0±0.15 12.0±0.1 2.0±0.1 0.35±0.03 16.0±0.2 4.5±0.1 9 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V IR REFLOW SOLDERING TEMPERATURE PROFILE (One Time Reflow Soldering is Recommended) TP 260°C TP - 5°C Max Ramp Up Rate 3°C/s TEMP (°C) TL Tsmax Tsmin tP Max Ramp Down Rate 6°C/s 217°C TL 200°C 150°C ts Preheat 60s – 120s 25°C TIME (s) Time 25°C to Peak Temperature Profile Details Conditions Preheat - Min Temperature (TSMIN) - Max Temperature (TSMAX) - Time TSMIN to TSMAX (ts) 150°C 200°C 60s - 120s Soldering Zone - Peak Temperature (TP) - Time at Peak Temperature - Liquidous Temperature (TL) - Time within 5°C of Actual Peak Temperature (TP ̶ 5°C) - Time maintained above TL (tL) - Ramp Up Rate (TL to TP) - Ramp Down Rate (TP to TL) 260°C 10s max 217°C 30s max 60s - 100s 3°C/s max 6°C/s max Average Ramp Up Rate (Tsmax to TP) 3°C/s max Time 25°C to Peak Temperature 8 minutes max 10 11/08/2017 DD93224 ISOCOM COMPONENTS H11L1, H11L1V NOTES : - Isocom is continually improving the quality, reliability, function or design and Isocom reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/application where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc., please contact our sales representatives. - When requiring a device for any ”specific” application, please contact our sales for advice. - The contents described herein are subject to change without prior notice. - Do not immerse device body in solder paste. 11 11/08/2017 DD93224 ISOCOM COMPONENTS DISCLAIMER ISOCOM is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing ISOCOM products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such ISOCOM products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that ISOCOM products are used within specified operating ranges as set forth in the most recent ISOCOM products specifications. __ The ISOCOM products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These ISOCOM products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation Instruments, traffic signal instruments, combustion control instruments, medical Instruments, all types of safety devices, etc.. Unintended Usage of ISOCOM products listed in this document shall be made at the customer’s own risk. __ Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. __ The products described in this document are subject to the foreign exchange and foreign trade laws. __ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by ISOCOM Components for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of ISOCOM Components or others. __ The information contained herein is subject to change without notice. 12 11/08/2017 DD93224