IS181B

IS181 DESCRIPTION The IS181 series of optocoupler consists of an infrared light emitting diode optically coupled to an NPN silicon photo transistor in a space efficient Mini Flat Package. 1 2 3 4 FEATURES • • • • • • Low Profile Package AC Isolation Voltage 3750VRMS CTR Selections Available Wide Operating Temperature Range -55°C to +110°C Lead Free and RoHS Compliant UL File E91231 model “FPT1” and “FPT2” APPLICATIONS • • • • Computer Terminals Industrial System Controllers Measuring Instruments Signal Transmission between Systems of Different Potentials and Impedance ORDER INFORMATION • Available in Tape and Reel with 3000 pieces per reel ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability. Input Forward Current Reverse Voltage Power dissipation http://www.isocom.com 1 20/03/2018 50mA 6V 70mW Output Collector to Emitter Voltage BVCEO 80V Emitter to Collector Voltage BVECO 6V Collector Current Power Dissipation 50mA 150mW Total Package Isolation Voltage Total Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature (10s) ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1PE, United Kingdom Tel : +44 (0)1429 863 609 Fax : +44 (0)1429 863 581 e-mail : sales@isocom.co.uk Anode Cathode Emitter Collector 3750VRMS 170mW -55 to 110 °C -55 to 150 °C 260°C ISOCOM COMPONENTS ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial Mansions, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel : +852 2995 9217 Fax : +852 8161 6292 e-mail : sales@isocom.com.hk DD93206 IS181 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) INPUT Parameter Symbol Test Condition Min Typ. Max Unit Forward Voltage VF IF = 20mA 1.2 1.4 V Reverse Current IR VR = 4V 10 µA Terminal Capacitance Ct V = 0V, f = 1KHz 30 250 pF Symbol Test Condition Min Typ. Max Unit Collector-Emitter Breakdown Voltage BVCEO IC = 0.1mA, IF =0 mA 80 V Emitter-Collector Breakdown Voltage BVECO IE = 10µA, IF = 0mA 6 V ICEO VCE = 20V, IF = 0mA Symbol Test Condition OUTPUT Parameter Collector-Emitter Dark Current 100 nA Max Unit % COUPLED Parameter Current Transfer Ratio CTR Min Typ. IF = 5mA, VCE = 5V 50 600 Optional CTR Grades IS181A IS181B IS181C IS181D IS181GR IS181GB 80 130 200 300 100 100 160 260 400 600 300 600 VCE(sat) IF = 20mA, IC = 1mA 0.2 V Floating Capacitance Cf V = 0V, f = 1MHz 0.6 1 pF Output Rise Time tr VCE = 2V, Ic = 2mA, RL = 100Ω 4 18 µs Output Fall Time tf VCE = 2V, Ic = 2mA, RL = 100Ω 3 18 µs Symbol Test Condition Min Typ. Max Unit Insulation Voltage VISO RH = 40% to 60%, t = 1 min, 3750 V Input - Output Resistance RI-O VI-O = 500VDC 5x1010 Ω Collector-Emitter Saturation Voltage ISOLATION Parameter 2 20/03/2018 DD93206 IS181 Fig 1 Forward Current vs TA Fig 2 Collector Power Dissipation vs TA Fig 3 Forward Current vs Forward Voltage Fig 4 Collector Current vs Collector-Emitter Voltage Fig 5 Collector-Emitter Saturation Voltage vs Forward Current Fig 6 Collector-Emitter Saturation Voltage vs TA 3 20/03/2018 DD93206 Normalized current transfer ratio Normalized current transfer ratio IS181 Forward current IF(mA) Ambient temperature Ta ( ºC) Fig 7 Normalized Current Transfer Ratio vs Forward Current Fig 8 Normalized Current Transfer Ratio vs TA Fig 9 Collector Dark Current vs TA Fig 10 Frequency response Fig 11 Response Time vs Load Resistance 4 20/03/2018 DD93206 IS181 ORDER INFORMATION IS181 After PN PN Description Packing quantity None IS181 Surface Mount Tape & Reel 3000 pcs per reel Any CTR Grade IS181A, IS181B, IS181C, IS181D, IS181GR, IS181GB Surface Mount Tape & Reel 3000 pcs per reel NOTE : Multiple Grades may be supplied to meet the requested specification. DEVICE MARKING FPT# I YWW R FPT# denotes Device Part Number where “#” is internal control number which can be “1” or ‘2” I denotes Isocom Y denotes 1 digit Year code WW denotes 2 digit Week code R denotes CTR Grade 5 20/03/2018 DD93206 IS181 PACKAGE DIMENSIONS (mm) RECOMMENDED SOLDER PAD LAYOUT (mm) 6 20/03/2018 DD93206 IS181 TAPE AND REEL PACKAGING Description Symbol Dimension mm (inch) Tape Width W 12 ± 0.3 (0.47) Pitch of Sprocket Holes P0 4 ± 0.1 (0.15) F 5.5 ± 0.1 (0.217) P2 2 ± 0.1 (0.079) P1 8 ± 0.1 (0.315) Distance of Compartment to Sprocket Holes Distance of Compartment to Compartment 7 20/03/2018 DD93206 IS181 IR REFLOW SOLDERING TEMPERATURE PROFILE One Time Reflow Soldering is Recommended. Do not immerse device body in solder paste. TP 260°C TP - 5°C Max Ramp Up Rate 3°C/s TEMP (°C) TL Tsmax Tsmin tP Max Ramp Down Rate 6°C/s 217°C TL 180°C 150°C ts Preheat 60s – 120s 25°C TIME (s) Time 25°C to Peak Temperature Profile Details Conditions Preheat - Min Temperature (TSMIN) - Max Temperature (TSMAX) - Time TSMIN to TSMAX (ts) 150°C 180°C 60s - 120s Soldering Zone - Peak Temperature (TP) - Liquidous Temperature (TL) - Time within 5°C of Actual Peak Temperature (TP ̶ 5°C) - Time maintained above TL (tL) - Ramp Up Rate (TL to TP) - Ramp Down Rate (TP to TL) 260°C 217°C 20s 60s 3°C/s max 3 - 6°C/s Average Ramp Up Rate (Tsmax to TP) 3°C/s max Time 25°C to Peak Temperature 8 minutes max 8 20/03/2018 DD93206 DISCLAIMER Isocom Components is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing Isocom Components products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Isocom Components products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that Isocom Components products are used within specified operating ranges as set forth in the most recent Isocom Components products specifications. The Isocom Components products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These Isocom Components products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation Instruments, traffic signal instruments, combustion control instruments, medical Instruments, all types of safety devices, etc... Unintended Usage of Isocom Components products listed in this document shall be made at the customer’s own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Isocom Components for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of Isocom Components or others. The information contained herein is subject to change without notice. 9 20/03/2018 DD93206