SFH601-1

SFH600-0, SFH600-1, SFH600-2, SFH600-3, SFH600-4 SFH601-1, SFH601-2, SFH601-3, SFH601-4, SFH601-5 SFH609-1, SFH609-2, SFH609-3, SFH609-4, SFH609-5 OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT APPROVALS l UL recognised, File No. E91231 'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead forms : - STD - G form - SMD approved to CECC 00802 Excludes SFH609-4,-5 l Certified to EN60950 by the following Test Bodies :Nemko - Certificate No. P01102465 Fimko - Certificate No. FI18162 Semko - Reference No. 0202041/01-25 Demko - Certificate No. 311161-01 Excludes SFH600-0, 601-2, 609-4,-5 l BSI approved - Certificate No. 8001 Excludes SFH609-4,-5 DESCRIPTION The SFH600-, SFH601-, SFH609-_ series of optically coupled isolators consist of an infrared light emitting diode and a NPN silicon photo transistor in a standard 6 pin dual in line plastic package. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High BVCEO (70V, 90V, 100V min) l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l DC motor controllers l Industrial systems controllers l Measuring instruments l Signal transmission between systems of different potentials and impedances OPTION SM SURFACE MOUNT OPTION G 2.54 7.0 6.0 1.2 7.62 6.62 Dimensions in mm 1 2 3 6 5 4 7.62 4.0 3.0 0.5 13° Max 0.26 3.0 0.5 3.35 ABSOLUTE MAXIMUM RATINGS (25°C unless otherwise specified) Storage Temperature -55°C to + 150°C Operating Temperature -55°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUT DIODE Forward Current Reverse Voltage Power Dissipation OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO SFH600-0,1,2,3,4 SFH601-1,2,3,4,5 SFH609-1,2,3,4,5 Collector-base Voltage BVCBO SFH600-0,1,2,3,4 SFH601-1,2,3,4,5 SFH609-1,2,3,4,5 Emitter-collector Voltage BVECO Power Dissipation 60mA 6V 105mW 70V 100V 90V 70V 100V 90V 6V 160mW 7.62 0.6 0.1 10.46 9.86 1.25 0.75 0.26 10.16 POWER DISSIPATION Total Power Dissipation 200mW (derate linearly 2.67mW/°C above 25°C) ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 7/3/03 DB92190m-AAS/A3 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Current (IR) Output Collector-emitter Breakdown (BVCEO) SFH600-0, 1, 2, 3, 4 SFH601-1, 2, 3, 4, 5 SFH609-1, 2, 3, 4, 5 Collector-base Breakdown (BVCBO) SFH600-0, 1, 2, 3, 4 SFH601-1, 2, 3, 4, 5 SFH609-1, 2, 3, 4, 5 Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) 70 100 90 70 100 90 6 50 MIN TYP MAX UNITS 1.2 1.65 10 V µA TEST CONDITION IF = 60mA VR = 6V IC = 1mA ( Note 2 ) V V V V V V V nA IC = 100µA IE = 100µA VCE = 10V 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 10mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 1mA IF , 5V VCE 10mA IF , 2.5mA See note 1 See note 1 VIO = 500V (note 1) Coupled Current Transfer Ratio (CTR) (Note 2) SFH600-0, SFH601-1, SFH609-1 40 SFH600-1, SFH601-2, SFH609-2 63 SFH600-2, SFH601-3, SFH609-3 100 SFH600-3, SFH601-4, SFH609-4 160 SFH600-4, SFH601-5, SFH609-5 200 SFH600-0, SFH601-1, SFH609-1 13 SFH600-1, SFH601-2, SFH609-2 22 SFH600-2, SFH601-3, SFH609-3 34 SFH600-3, SFH601-4, SFH609-4 56 SFH600-4, SFH601-5, SFH609-5 68 Collector-emitter Saturation VoltageVCE(SAT) Input to Output Isolation Voltage VISO 5300 7500 Input-output Isolation Resistance RISO 5x1010 80 125 200 320 400 0.4 % % % % % % % % % % V VRMS VPK Ω Note 1 Note 2 Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. 2. Switching Operation (with saturation) Fig 2 TYPICAL SWITCHING CHARACTERISTICS 1. Linear Operation (without saturation) Fig 1. IF = 10mA, VCC = 5V, RL = 75Ω Turn-on Time Rise Time Turn-off Time Fall Time Cut-off Frequency ton tr toff tf FCO VCC = 5V, RL = 1kΩ UNITS 3.0 2.0 2.3 2.0 250 µs µs µs µs kHz GROUP Turn-on Time ton tr Rise Time Turn-off Time toff tf Fall Time VCESAT INPUT 600-0 600-1&2 600-3 601/9-1 601/9-2&3 601/9-4&5 (IF=20mA) (IF=10mA) (IF=5mA) UNITS 3.0 2.0 18 11 4.2 3.0 23 14 < 0.4 6.0 4.6 25 15 µs µs µs µs V VCC = 5.0V R L = 75 Ω OUTPUT VCC = 5.0V R L = 1k Ω OUTPUT ton tr OUTPUT 10% 90% toff tf 10% 90% FIG 1 7/3/03 FIG 2 D B92190m-AAS/A3 Collector Power Dissipation vs. Ambient Temperature 200 Collector power dissipation PC (mW) Collector Current vs. Collector-emitter Voltage ( normalised to SFH601-3 ) 50 TA = 25°C 150 Collector current IC (mA) 40 30 20 10 50 30 20 15 10 100 50 IF = 5mA 0 -30 0 25 50 75 100 125 Ambient temperature TA ( °C ) Forward Current vs. Ambient Temperature 80 Current transfer ratio CTR (%) 70 0 0 2 4 6 8 10 Collector-emitter voltage VCE ( V ) Current Transfer Ratio vs. Forward Current 320 280 240 200 160 120 80 40 0 -30 0 25 50 75 100 125 1 2 5 10 20 50 Ambient temperature TA ( °C ) Relative Current Transfer Ratio vs. Ambient Temperature 1.5 Forward current IF (mA) Collector-emitter Saturation Voltage vs. Ambient Temperature 0.28 0.24 0.20 0.16 0.12 0.08 0.04 0 -30 0 25 50 75 100 Ambient temperature TA ( °C ) D B92190m-AAS/A3 VCE = 5V TA = 25°C SFH601-5 SFH601-4 Forward current IF (mA) 60 50 40 30 20 10 0 SFH601-3 SFH601-2 SFH601-1 IF = 10mA VCE = 5V Collector-emitter saturation voltage VCE(SAT) (V) Relative current transfer ratio IF = 10mA IC = 2.5mA 1.0 0.5 0 -30 0 25 50 75 100 Ambient temperature TA ( °C ) 7/3/03