204468B

SAW Bandpass Filter 204468B Features IF bandpass filter High attenuation 50 ohms single-ended operation SMD Package 13.3mm × 6.5mm × 1.6mm Package Dimension 13.30±0.2 10 9 8 7 7 7.62±0.1 8 9 10 6.50±0.2 11 6 6 1.50±0.1 11 ITF 02D073A 12 204468B 1 2 3 4 5 2.54±0.1 5 12 1.61±0.2 4 3 2 2.54±0.1 1 0.80±0.1 Package S1365 Pin Configuration Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 11 5 6, 12 1, 2, 3, 4, 7, 8, 9, 10 Input Output Ground Case ground Maximum Ratings Parameter Operation Temperature Range Storage Temperature Range Electrostatics Sensitive Device (ESD) Unit °C °C Minimum -10 -40 Typical 25 Maximum 60 85 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 1/7 SAW Bandpass Filter 204468B Electrical Specification Fc = 160.0MHz Terminating source impedance Terminating load impedance : 50Ω and matching network : 50Ω and matching network Minimum Center Frequency at room temp. Insertion Loss 3dB Bandwidth 40dB Bandwidth Absolute Group Delay at Fc Group Delay Variation at 3dB Relative Attenuation ~ Fo - 0.5 MHz … Fo + 0.5 MHz ~ Temperature Coefficient of Frequency MHz dB MHz MHz usec usec 159.920 0.085 - Typical 160.0 4.0 0.095 0.350 10.5 5.0 Maximum 160.080 5.5 0.400 - dB ppm/°C2 50 55 - - -0.03 - Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 2/7 SAW Bandpass Filter 204468B Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω L1 L2 Output 50Ω C1 C2 L1, L2 C1, C2 = = 220 nH 1.0 pF Marking Configuration ITF1) 02D0732) A3) 204468B4) 1) Manufacturer name 2) Lot Number 3) Group Name ( **refer to the next page ) 4) Part Number I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 3/7 SAW Bandpass Filter 204468B Marking Example Center Frequency Range ( MHz) at room temp. 159.920 ~ 159.929 Marking ITF 02D073F 204468B 159.930 ~ 159.939 ITF 02D073G 204468B 159.940 ~ 159.949 ITF 02D073H 204468B 159.950 ~ 159.959 ITF 02D073I 204468B 159.960 ~ 159.969 ITF 02D073J 204468B 159.970 ~ 159.979 ITF 02D073K 204468B 159.980 ~ 159.989 ITF 02D073L 204468B 159.990 ~ 159.999 ITF 02D073M 204468B 160.000 ~ 160.009 ITF 02D073N 204468B 160.010 ~ 160.019 ITF 02D073O 204468B 160.020 ~ 160.029 ITF 02D073P 204468B 160.030 ~ 160.039 ITF 02D073Q 204468B 160.040 ~ 160.049 ITF 02D073R 204468B 160.050 ~ 160.059 ITF 02D073S 204468B 160.060 ~ 160.069 ITF 02D073T 204468B 160.070 ~ 160.079 ITF 02D073U 204468B I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 4/7 SAW Bandpass Filter 204468B Typical Performance (at +25℃) 4 Aug 2003 12:04:58 CH1 S 21 log MAG 10 dB/ REF 0 dB PRm Cor CH1 CENTER 160.000 000 MHz SPAN 2.500 000 MHz CH1 CH2 PRm Cor S 21 S 21 log MAG delay 1 dB/ 3.047 us/ REF 0 dB REF 0 s 4 Aug 2003 12:22:20 1_ 0 dB 1_: 8.5235 us 0.000 000 MHz Max BW: .098 938 MHz REF=1 cent: 159.991164 MHz Q: 1617.1 1_ loss: -4.4966 dB 1 2 159.990 000 MHz PRm 1 Cor 3 Smo 2 1 CENTER 160.000 000 MHz SPAN .200 000 MHz 4 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 5/7 SAW Bandpass Filter 204468B Packing Specification 1. Reeling Quantity : 2000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 6/7 SAW Bandpass Filter 204468B Carrier Tape Dimensions [unit : mm] A B C D E F 7.00 ± 0.1 13.80 ± 0.1 13.25 ± 0.1 1.95 ± 0.1 24.00 ± 0.1 12.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] G = 2G = 24.4 mm I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 204468B 2003-09-02 NR3011-AS03 7/7