F2G12

SAW Bandpass Filter F2G12 Features W-CDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm ) Single-ended Operation RoHS Compliant Package Dimensions 1 6 6 1 2 I 2G12 5 5 2 3 4 4 3 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit ℃ ℃ dBm Minimum -30 -40 Typical 25 Maximum 85 85 13 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 1/7 SAW Bandpass Filter F2G12 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 30.0 MHz) Amplitude Ripple (In Fc +/- 30.0 MHz) VSWR (In Fc +/- 30.0 MHz) Relative Attenuation 0.3 MHz ~ 500.0 MHz 500.0 MHz ~ 1900.0 MHz 1900.0 MHz ~ 2050.0 MHz 2215.0 MHz ~ 2300.0 MHz 2300.0 MHz ~ 3000.0 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance 50 21.0 20.0 25.0 20.0 25.0 -30 33.0 28.0 30.0 32.0 32.0 25 85 13 ℃ dBm Ohms dB Typical 2140.0 2.2 0.8 1.8 Maximum 3.5 1.5 2.4 Unit MHz dB dBp-p Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 2/7 SAW Bandpass Filter F2G12 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 2G123) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 3/7 SAW Bandpass Filter F2G12 Typical Performance ( at 25℃ ) CH1 S21 LOG 10 dB/ REF 0 dB 24 Jan 2007 17:25:36 3:-2 . 3380 dB 2 140. 000 000 MHz CH1 Markers Cor 1 3 2 1:-2 . 2657 dB 2. 11000 GHz 2:-2 . 1877 dB 2. 17000 GHz CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 24 Jan 2007 17:20:03 2:-2 . 8994 dB 2 140. 000 000 MHz CH1 Markers Cor 2 1:-40 . 338 dB 1. 95000 GHz 1 START . 010 000 MHz STOP 3 000. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 4/7 SAW Bandpass Filter F2G12 Input / Output VSWR Charts 24 Jan 2007 17:25:49 3: 1. 8729 2 140. 000 000 MHz 24 Jan 2007 17:25:56 3: 1. 7802 2 140. 000 000 MHz CH1 S11 SWR 1/ REF 1 CH1 S22 SWR 1/ REF 1 CH1 Markers Cor 1: 1. 4705 2. 11000 GHz 2: 1. 5321 2. 17000 GHz Cor CH1 Markers 1: 1. 3155 2. 11000 GHz 2: 1. 4638 2. 17000 GHz 3 3 1 CENTER2 140. 000 000 MHz 2 SPAN 600. 000 000 MHz CENTER2 140. 000 000 MHz 1 2 SPAN 600. 000 000 MHz Input / Output Smith Charts 24 Jan 2007 17:26:12 2. 1309 nH 2 140. 000 000 MHz 24 Jan 2007 17:26:22 2. 0506 nH 2 140. 000 000 MHz CH1 S11 1 U FS 3: 42. 834 28. 652 CH1 S22 1 U FS 3: 45. 746 27. 572 CH1 Markers Cor 1: 62. 244 17. 822 2. 11000 GHz 2: 35. 656 11. 145 2. 17000 GHz 3 3 Cor CH1 Markers 1: 65. 406 3. 1172 2. 11000 GHz 2: 34. 150 0. 2832 2. 17000 GHz 2 1 2 1 CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz Packing Specification I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 5/7 SAW Bandpass Filter F2G12 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape 0~15 degree Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 6/7 SAW Bandpass Filter F2G12 Carrier Tape Dimensions [unit : mm] A B C D E F 3.40 ± 0.1 3.40 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F2G12 2007-01-24 NC6002-AS03 7/7