F3152

SAW Bandpass Filter 315.0MHz Features RF bandpass filter Single-ended operation Ceramic Surface Mounted Device Package ( 5.0 mm × 5.0 mm ) 2.08±0.15 Package Dimensions 5.00±0.15 8 1.2±0.15 8 5.00±0.15 1 2 3 ITF 3152 4 7 6 5 7 6 5 1 2 3 1.35±0.15 1.27±0.05 4 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 6 1, 3, 4, 5, 7, 8 Input Output Ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 85 10 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 0.6±0.15 F3152 2005-11-08 NS5008-PS01 1/6 SAW Bandpass Filter 315.0MHz Preliminary Specifications Minimum Center Frequency ( Fc ) Insertion Loss 3dB Bandwidth Typical 315.0 3.0 0.6 Maximum 5.5 Unit MHz dB MHz Attenuation Fc -10.7MHz Fc -21.4MHz 15 40 30 50 - dB Frequency Temperature Coefficient Temperature Range (Operational) Input/Output Impedance -30 0.032 25 50 85 Ppm/℃ ℃ Ohms 2 Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F3152 2005-11-08 NS5008-PS01 2/6 SAW Bandpass Filter 315.0MHz Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω L1 L2 Output 50Ω C1 C2 C1 , C2 = 10 pF L1, L2 = 43nH Marking Configuration ITF1) 31522) 1) Manufacturer name 2) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F3152 2005-11-08 NS5008-PS01 3/6 SAW Bandpass Filter 315.0MHz Typical Performance ( at 25℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F3152 2005-11-08 NS5008-PS01 4/6 SAW Bandpass Filter 315.0MHz Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F3152 2005-11-08 NS5008-PS01 5/6 SAW Bandpass Filter 315.0MHz Carrier Tape Dimensions [unit : mm] A B C D E F 5.50 ± 0.1 5.50 ± 0.1 7.25 ± 0.1 1.95 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F3152 2005-11-08 NS5008-PS01 6/6