F4505

SAW Bandpass Filter F4505 Features RF bandpass filter High attenuation Usable bandwidth 4MHz No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package 3.80±0.15 1.00±0.15 0.44 1.90±0.15 1 3.80±0.15 6 6 0.44 1 2 ITF 4505 5 5 2 1.40±0.15 3 4 4 3 1.27±0.05 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configuration 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -10 -40 Typical 25 Maximum 60 85 - I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 0.64±0.05 Package Dimensions F4505 2004-11-1601 NS3015-AS02 1/7 SAW Bandpass Filter F4505 Specifications Fc = 450.0MHz Terminating source impedance Terminating load impedance : 50Ω : 50Ω Minimum Center Frequency ( Fc ) Insertion Loss (Fc +/- 2.0 MHz) Amplitude Ripple (Fc +/- 2.0 MHz) Absolute Group Delay at Fc Group Delay Variation (Fc +/- 2.0 MHz) VSWR (Fc +/- 2.0 MHz) Relative Attenuation … ~ Fc - 15 MHz Fc + 25 MHz ~ … Temperature Coefficient of Frequency MHz dB dB nsec nsec - Typical 450.0 2.5 1.0 120 50 1.5 Maximum 3.5 2.0 2.0 dB 45 45 - 50 50 -32 - ppm/°C - Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 2/7 SAW Bandpass Filter F4505 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration ITF1) 45052) 1) Manufacturer name 2) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 3/7 SAW Bandpass Filter F4505 Typical Performance ( at 25℃ ) 12 Apr 2004 03:32:22 2: . 18600 dB 4. 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 2 1 PRm CH1 Markers Cor mean : -3 . 2812 dB s. dev : . 09640 dB p-p : . 32900 dB REF=1 CENTER 450 . 000 000 MHz SPAN 100 . 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 1 12 Apr 2004 03:35:57 1: -3 . 9363 dB 450 . 000 000 MHz PRm C START . 030 000 MHz STOP 1 000 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 4/7 SAW Bandpass Filter F4505 Input / Output VSWR Charts CH1 S11 SWR 1/ REF 1 12 Apr 2004 03:33:47 1: 1. 0844 450 . 000 000 MHz CH1 S22 SWR 1/ REF 1 12 Apr 2004 03:34:01 1: 1. 0765 450 . 000 000 MHz PRm PRm Cor Cor 1 CENTER 450 . 000 000 MHz SPAN 100 . 000 000 MHz CENTER 450 . 000 000 MHz 1 SPAN 100 . 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 1: 47. 537 -3 . 0234 12 Apr 2004 03:33:10 116 . 98 pF 450 . 000 000 MHz CH1 S22 1 U FS 1: 47. 865 -2 . 8984 12 Apr 2004 03:33:21 122 . 02 pF 450 . 000 000 MHz PRm PRm Cor Cor 1 1 CENTER 450 . 000 000 MHz SPAN 100 . 000 000 MHz CENTER 450 . 000 000 MHz SPAN 100 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 5/7 SAW Bandpass Filter F4505 Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 6/7 SAW Bandpass Filter F4505 Carrier Tape Dimensions [unit : mm] A B C D E F 4.30 ± 0.1 4.30 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4505 2004-11-1601 NS3015-AS02 7/7