F4552

SAW Bandpass Filter F4552 Features RF bandpass filter for CDMA450 A-Band Tx. Part Usable bandwidth 5MHz (452.5 MHz ~ 457.5 MHz) High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm ) RoHS compliant 3.80±0.15 1.00±0.1 1.90±0.1 1 6 6 1 2 ITF 4552 5A1 3.80±0.15 5 5 2 1.40±0.15 3 4 4 3 1.27±0.1 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 85 27 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 0.64±0.1 Package Dimensions F4552 2006-06-08 NR3013-AS04 1/7 SAW Bandpass Filter F4552 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 2.5 MHz) Amplitude Ripple (In Fc +/- 2.5 MHz) VSWR (In Fc +/- 2.5 MHz) Relative Attenuation 0.3 MHz ~ 350.0 MHz 350.0 MHz ~ 441.0 MHz 462.5 MHz ~ 467.5 MHz 467.5 MHz ~ 1200 MHz 1200 MHz ~ 2000 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 2.5 MHz) Input/Output Impedance 50 25 25 35 25 20 -30 30 30 43 30 25 85 27 ℃ dBm Ohms dB Typical 455.0 2.0 0.8 1.4 Maximum 2.8 1.5 2.0 Unit MHz dB dB Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 2/7 SAW Bandpass Filter F4552 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) ITF2) 45523) 5A14) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number 4) Lot Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 3/7 SAW Bandpass Filter F4552 Typical Performance ( at 25℃ ) 18 Sep 2003 10:34:13 1_:-1.2538 dB REF -1.861 dB 452.500 000 MHz PRm Cor 1 2_:-1.9454 dB 457.5 MHz 3_:-43.757 dB 462.5 MHz 2 4_:-52.627 dB 467.5 MHz CH1 S 21 log MAG 10 dB/ 3 4 CH1 CENTER 455.000 000 MHz SPAN 100.000 000 MHz CH2 S 21 log MAG 1 dB/ REF 0 dB 18 Sep 2003 10:36:00 2_:-.6639 dB 5.000 000 MHz REF=1 2 mean:-1.700 1 dB s.dev: .1958 dB p-p: .7252 dB 1 PRm Cor CH2 CENTER 455.000 000 MHz SPAN 30.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 4/7 SAW Bandpass Filter F4552 Input / Output VSWR Charts CH2 S 11 SWR 1/ REF 1 18 Sep 2003 10:38:38 5_: 1.2037 455.000 000 MHz 3 4 CH2 S 22 SWR 1/ REF 1 18 Sep 2003 10:38:52 5_: 1.1391 455.000 000 MHz 3 4 1_: 1.2177 452.5 MHz 2_: 1.2213 457.5 MHz 3_: 27.374 462.5 MHz 4_: 32.684 467.5 MHz 1_: 1.2279 452.5 MHz 2_: 1.3604 457.5 MHz 3_: 27.622 462.5 MHz 4_: 29.499 467.5 MHz PRm Cor PRm Cor 5 5 2 CH2 CENTER 455.000 000 MHz 1 2 SPAN 30.000 000 MHz CH2 CENTER 455.000 000 MHz 1 SPAN 30.000 000 MHz Input / Output Smith Charts CH1 S 11 1 U FS 5_: 48.574 18 Sep 2003 10:37:06 -9.2949 37.633 pF 455.000 000 MHz PRm Cor 1_: 42.076 -4.5508 452.5 MHz 2_: 58.033 7.916 457.5 MHz 3_: 7.207 -99.797 462.5 MHz 4_: 2.375 -55.975 467.5 MHz 5 1 5 2 2 1 PRm Cor 1_: 41.814 -5.293 452.5 MHz 2_: 68.082 0.8203 457.5 MHz 3_: 7.5391 -94.848 462.5 MHz 4_: 3.2441 -54.301 467.5 MHz CH1 S 22 1 U FS 5_: 50.613 18 Sep 2003 10:37:19 -6.7285 51.986 pF 455.000 000 MHz 3 3 4 CH1 CENTER 455.000 000 MHz 4 SPAN 100.000 000 MHz CH1 CENTER 455.000 000 MHz SPAN 100.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 5/7 SAW Bandpass Filter F4552 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 6/7 SAW Bandpass Filter F4552 Carrier Tape Dimensions [unit : mm] A B C D E F 4.30 ± 0.1 4.30 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4552 2006-06-08 NR3013-AS04 7/7