SAW Bandpass Filter F4621
Features
RF bandpass filter for CDMA450 C-Band Rx. Part Usable bandwidth 5MHz (460 MHz ~ 465 MHz) High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm ) RoHS compliant
3.80±0.15
1.00±0.15 0.44
1.90±0.15
1
6
6 0.44
1
2
1.40±0.15
3
ITF 4621 5A1
3.80±0.15
5
5
2
4
4
3 1.27±0.05
Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating
Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground
Maximum Ratings
Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 85 27
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
0.64±0.05
Package Dimensions
F4621 2006-06-08 NR3017-AS02 1/7
SAW Bandpass Filter F4621
Specifications
Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 2.5 MHz) Amplitude Ripple (In Fc +/- 2.5 MHz) VSWR (In Fc +/- 2.5 MHz) Relative Attenuation 0.3 MHz ~ 450.0 MHz 450.0 MHz ~ 455.0 MHz 482.0 MHz ~ 1200 MHz 1200 MHz ~ 1700 MHz 1700 MHz ~ 2000 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 2.5 MHz) Input/Output Impedance 45 35 40 35 20 -30 -
Typical 462.5 3.0 1.0 1.5
Maximum 3.8 2.2 2.4
Unit MHz dB dB
52 43 45 40 25 25
85 27 ℃ dBm Ohms dB
50
Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 2/7
SAW Bandpass Filter F4621
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input 50Ω
Output 50Ω
Marking Configuration
1)
ITF2) 46213) 5A14)
1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number 4) Lot Number
* Ink or Laser Marking available
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 3/7
SAW Bandpass Filter F4621
Typical Performance ( at 25℃ )
21 Oct 2003 15:55:02 5_:-2.1847 dB 462.500 000 MHz PRm Cor 1_:-48.58 dB 450 MHz 5 2_:-42.523 dB 455 MHz 4 3_:-2.9194 dB 460 MHz 4_:-2.5371 dB 465 MHz
CH1
S 21
log MAG
10 dB/
REF 0 dB
3
2 1
CH1 CENTER 465.000 000 MHz
SPAN 100.000 000 MHz
CH2
S 21
log MAG
1 dB/
REF 0 dB
21 Oct 2003 15:57:31 2_: .3952 dB 5.000 000 MHz REF=1 mean:-2.389 7 dB s.dev: .2305 dB p-p: .7937 dB
2
1
PRm Cor
CH2 CENTER 465.000 000 MHz
SPAN 30.000 000 MHz
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 4/7
SAW Bandpass Filter F4621
Input / Output VSWR Charts
21 Oct 2003 15:59:20 5_: 1.1469 462.500 000 MHz
CH2
S 11 1
SWR
1/
REF 1
CH2
S 22 1
SWR
1/
REF 1
21 Oct 2003 16:00:25 5_: 1.0959 462.500 000 MHz
1_: 11.36 450 MHz 2_: 6.4784 455 MHz 3_: 1.2644 460 MHz 4_: 1.5524 465 MHz
1_: 12.684 450 MHz 2_: 7.0646 455 MHz 3_: 1.1647 460 MHz 4_: 1.7426 465 MHz
2
2
PRm Cor
PRm Cor
5 4 CH2 CENTER 465.000 000 MHz 3 SPAN 30.000 000 MHz
5 4 CH2 CENTER 465.000 000 MHz 3 SPAN 30.000 000 MHz
Input / Output Smith Charts
CH1
S 11
1 U FS
5_: 56.846
21 Oct 2003 16:00:55 -2.0566 167.32 pF 462.500 000 MHz
CH1
S 22
1 U FS
5_: 53.764
21 Oct 2003 16:01:30 -1.2578 273.59 pF 462.500 000 MHz
PRm Cor 1_: 4.5454 11.392 450 MHz 2 2_: 9.6836 25.77 455 MHz 3_: 40.902 6.3633 460 MHz 4_: 31.828 0.6719 465 MHz
PRm Cor 1_: 4.1323 10.135 450 MHz 2 2_: 8.0811 23.682 455 MHz 3_: 42.945 1.9805 460 MHz 1 5 3 4 4_: 29.463 -2.9736 465 MHz
1
5 3 4
CH1 CENTER 465.000 000 MHz
SPAN 100.000 000 MHz
CH1 CENTER 465.000 000 MHz
SPAN 100.000 000 MHz
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 5/7
SAW Bandpass Filter F4621
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min.
END START
Tape Running Direction
2. Tensile strength of carrier tape 4.4N/mm width
Top cover tape Direction of pull
3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g
Carrier tape
0~15 degree
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 6/7
SAW Bandpass Filter F4621
Carrier Tape Dimensions [unit : mm]
A B C D E F
4.30 ± 0.1 4.30 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F4621 2006-06-08 NR3017-AS02 7/7